TRAVELLER TC1001 User manual

Distributed By:
TRACTOR SUPPLY COMPANY
200 POWELL PLACE
BRENTWOOD, TN 37027
For customer support ,call 1-888-376-9601
www.TractorSupply.com
MADE IN CHINA
INSTALLATION INSTRUCTION
ONE PIECE CARGO CARRIER
SKU#:0189155

SKU#:0189155
USER MANUAL
CAUTION
1.Do not load any flammable products on the cargo carrier.
2.Only non-flammable tarps should be used for securing cargos.
3.Check all nuts, bolts and pins are fully tightened prior to use.
Always ensure all goods are evenly distributed & firmly secured.
MATERIAL LIST
Part NO. Description
1
1
2
2
4
ASSEMBLY INSTRUCTIONS
1. Lay unit face down on a flat, even surface.
2. Mount receiver tube between angles in the center of carrier.
3. Insert 1 flat washer on each bolt.
4. Insert each bolt through angle and tube.
5. Install flat washer on each bolt.
6. Install locking nut on each bolt.
7.Tighten nuts securely to make sure angle is tight against tube.
8.Turn unit over.
9.Install one bent pin and cotter pin for upright securing.
STEP 1
STEP 3
STEP 2
1/2-13x3 1/2 grade 5hex head bolt
1/2-13 nylon insert lock nuts
1/2 flat washers
2" square receiver tube
bent pin and cotter pin
Quantity
①
③
③
②
①
②
④
④
⑤
⑤
MATERIAL
READ ALL INSTURCTIONS CAREFULLY BEFORE USE