Tree TR-KS-C User manual

Teeth Whitening Light
User Guide
TR-KS-CTR-KS-C

1
CONTENT
1.DESCRIPTION---------------------------------------2
2.FEATURES--------------------------------------------2
3.INSTALLATION--------------------------------------3
4.OPERATION-------------------------------------------4
5.TECHNICAL PARAMETERS-----------------------6
6.PRECAUTION------------------------------------------6
7.MAINTENANCE---------------------------------------6
8.TRANPORTATION AND STORAGE---------------7
9.MALFUNCTION AND SOLVING METHOD-----8
10.WARRANTY REGISTRATION FORM------------9

2
1.DESCRIPTION
The whitening device D6GG is a new type whitening
Technology, based on the condition of Strong blue LED light
and whitening kit accelerant. By the character of
nanometerpellet on the surface and light decomposition,
activate the most H2O2 in short order on low or normal
temperature. Produce mass oxygen atomy permeate teeth and
decompose color molecule, to meet the effect of teeth
whitening.
2.FEATURES
(1). The specifical wavelength and high density light speed
Catalyze whitening gel.
(2). 6 powerful LED tubes emit a high intensive cold blue light
(3). Special design, innocuous silica gel muzzle, make sure
stopping intersectional infection.
(4). The new model of power supply make sure steady power
output and long-time continuous working even in some
cities and places with mutative voltage.
(5). Time display screen shows the whitening time clearly to
both dentist and patient.

3
3.INSTALLATION

4
4.OPERATION
4.1.Button Operation
(1). ON/OFF : Press ON/OFF button to set the unit working.
The power light and standby light on.
(2). Time Setting (UP/DOWN): According to patient’s
condition,doctor can increase or decrease the time level
from 1~20mins.
(3). PAUSE: Press this button to set the unit to h-i standby
mode. Ready indicator light is off, and standby indicator
light is on.
(4). START: Press this button to set the unit to send
LED-luminescence
(5). HIGH/LOW: Press this button to chiise light intensity as
high mode or low mode

5
4.2Application
(1). Connect power source and turn it on.
(2). The machine is in stand-by after a prompt sound of
buzzing. Position “ON/OFF” would be showed glinting “20”.
(3). Adjust the operation time by “time up/ time down”, adjust
range from 1 to 20 minutes.
(4). Alarm sound after pressing “START”, and a blue light
transmitted from the light guide of terminal, time display is
counting down.
(5). Alarm sound for 5 seconds after countdown finished, blue
light extinguish.
4.3Operation Notice
(1). Please don’t turn the poer OFF immediately once blue
light extinguished, the machine will turn to heat-emiting
and cooling condition according to preset procedure
(2). Light guide terminal is made of the polyester material
which is smooth and transparent. Please do not clean it
with the incisive object.
(3). Please don’t put heavy item on the power cable, and
always keep the device far from heat source.
(4). Turn it off without using it.

6
5.TECHNICAL PARAMETERS
(1). Power Supply: AC100-240V, 50/60HZ
(2). Light Size: 33*74mm2
(3). Light Timing:0~20 mins
(4). Power Instability: < 1%
(5). Working Method: time output & continuous working
(6). Coupling: polyester monowave
6.PRECAUTION
(1). User should wear goggle during operation of
the device.
(2). Always keep treatment room ventilated during operation
of the device.
7.MAINTENANCE
(1). Make regular back-check and keep machine surface clean.
(2). This machine is precise optical equipment, it should be
used in the clean and dry place without atomy.
(3). Environment condition: no atomy, no shock, no dampness.
(4). Treatment room temperature 16-20℃, humidity <40%
(5). Clean up transparent head after each treatment by alcohol
(avoid clean by sharp object), make sure it’s clean to avoid
cross infection between patients. Silica gel muzzle can be
Sterilized.

7
(6). If any “error” show on the display, turn off power and stop
operating immediately, ask for help pr advice from
professional technician.
(7).Change the warter or sand inside the base regularly.
8.TRANSPORTATION AND STORAGE
(1).Lay lightly during transportation, avoid strong shake.
(2). Storage condition:
a. Ambiance temperature: -40~50℃
b. Relative humidity: <95%

8
9.MALFUNCTION AND SOLVING
METHOD
No.
MALFUNCTIO
N
RESOLVE
1
Turn on the
machine, no
working
a. Check if the power connect well
b. Power is in bad condition,
contact with supplier for help
and advice
2
Light out putport
without voltage
a. Power is in bad condition,
contact with supplier
3
Light output
power decline
a.Cross section of LED bulb is
damaged
b. LED bulb life expired, contact
with supplier to exchange new
one
4
Light output port
with voltage, but
without light
output
a. LED bulb is amaged, contact
with supplier to exchange new
one.

9
10.WARRANTY REGISTRATION
FORM
Item Name:
Model Name:
Serial No.:
Date of Purchase:
Name:
Address:
Phone:
Email:
Name of Distributor:
Authorized Distributors:
Stamp and Signature