Tremco Battery-Powered Cartridge Gun User manual

Product Advantages
Features Benefits
Battery powered Portable, no cords or
hoses
Quick and easy use Saves time and labor
Trigger delay Saves battery charge
Durable construction Withstands everyday use
Strong motor Can dispense higher
viscosity adhesives
Roofing & Weatherproofing Peace of Mind™
Descripti n
Battery-Powered Cartridge Gun is specially designed
to be used with 1.5L units of dual-component Tremco
adhesive products such as Tremco Low Rise Foam
Insulation Adhesive, Tremco LR Adhesive and Tremco
LF Adhesive. The unique carriage design is extremely
durable and allows the user to install adhesive in an
upright position eliminating back strain. The tool is
powered by a 14.4 volt rechargeable battery. The
motor is designed to run on lower amps than conven-
tional cordless tools which extends overall battery life
and reduces charging time.
User Instructi ns
1. Assemble carriage handle using the provided (4)
screws and lock nuts with the wrench and allen key
(also included).
2. Open the clutch lever to allow movement of the
racks. Retract the rack by pulling the rack handle
away from the tool.
3. Prepare adhesive cartridge by removing caps
or plugs and installing static mixing nozzle.
N te: Follow complete instructions for cartridge
preparation as described in product data sheet.
4. Insert cartridge into the carriage. Line up the
cartridge and the cartridge nozzle opening for
correct positioning.
5. Push the rack handle forward, lining up pistons
with the openings on the cartridge. Close the clutch
lever to engage clutch.
6. Slide the battery onto the handle until it is fully
engaged.
7. Adjust speed control knob to desired flow. High
speed is designated on the knob by the largest
“bubble” symbol. Slower speeds; smaller bubbles.
N te: Most applications will require the tool to be
operated at full speed.
8. Hold trigger to begin dispensing adhesive. ote:
Trigger must be depressed 2 times before tool
operates when it has sat idle. This is a power saving
feature built into the tool.
9. When finished dispensing, or when end of cartridge
is reached, release trigger, open clutch, then retract
rack. Remove cartridge.
Packaging:
Battery-Powered Cartridge Gun includes 2 recharge-
able iCd batteries, 1 battery charger, and 1 detach-
able carriage handle.
Descripti n
Battery Powered
Maintenance Instructi ns
• Keep handles clean, dry and free of oil or grease.
• Clean with mild soap and damp cloth. Do not use
solvents or cleaning agents that can damage the
tools plastic parts.
• Follow cleaning and maintenance instructions in
battery charger manual and battery pack leaflet.
• Remove adhesive residue from rack and pistons
regularly if present. Apply light coating of light
machine oil to lubricate rack as needed.
• For internal lubrication and all other maintenance,
except external cleaning and battery pack
recharging, and for all repairs, return to service
center, distributor, or manufacturer.
• If the tool is not running at full capacity, check to be
sure that the battery pack is fully charged and that
Battery-Powered Cartridge Gun
F r Applicati n f Dual-C mp nent
Tremc Adhesives

3735 Green Road
Beachwood, OH 441
16- 9 -5000
0 Wicksteed Ave
Toronto, ONT M4H 1G7
416-4 1-3300
6805 1/16
Printed in USA
the contacts on the battery pack and tool are both
clean. If they need maintenance, use caution and
clean with an eraser.
Safety
Tool service must be performed only by qualified
repair personnel. Service or maintenance performed
by unqualified personnel may result in risk of an injury.
D n t disassemble t l r battery pack. At the
conclusion of it’s useful life, remove battery pack
from tool. Without further disassembly, return battery
pack intact for recycling and/or discard tool intact.
Disassembly and reassembly may create an unsafe
condition.
When servicing a tool, use only identical replacement
parts. Use of unauthorized parts or failure to follow
Maintenance Instructions may create a risk of electrical
shock or injury.
Precauti ns: Users must read container labels and
Material Safety Data Sheets for health and safety
precautions prior to use.
Availability and C st: Contact your local Tremco
Roofing Representative for pricing and availability.
For the name and number of your Representative,
call the Roofing Division at 216/292-5000.
Guarantee/Warranty: Tremco Inc. warrants Battery-
Powered Cartridge Gun to be free of defects. Under
this warranty, any Battery-Powered Cartridge Gun
product that is proved to be defective when applied
in accordance to our written instructions, and in
applications recommended by Tremco as suitable
for this product will be replaced with like product at
no charge. THIS IS BUYER'S SOLE A D EXCLUSIVE
REMEDY.
All claims concerning product defects must be made
in writing within six (6) months of shipment. The
absence of such claims in writing during this period
will constitute a waiver of all claims with respect to
such product.
This warranty shall be I LIEU OF any other
warranty, express or implied, including but
not limited to, any implied warranty of
MERCHA TABILITY OR FIT ESS FOR A
PARTICULAR PURPOSE.
Technical Services: Your local Tremco
Representative, working with the Technical Service
Staff, can help analyze conditions and needs to
develop recommendations for special applications.
The services of the Tremco Research Center, which
has earned a unique reputation in weatherproofing
technology, complement and extend the services
of the Tremco Technical Service staff.
Statement f P licy and Resp nsibility:
Tremco takes responsibility for furnishing quality
materials and for providing specifications and
recommendations for their proper installation.
As neither Tremco itself nor its Representatives
practice architecture or engineering, Tremco
offers no opinion on, and expressly disclaims any
responsibility for the soundness of any structure
on which its products may be applied. If questions
arise as to the soundness of a structure or its ability
to support a planned installation properly, the
Owner should obtain the opinion of competent
structural engineers before proceeding. Tremco
accepts no liability for any structural failure or for
resultant damages, and no Tremco Representative
is authorized to vary this disclaimer.