TREND AIRPRO MAX User manual

USER INSTRUCTIONS
Document ref. number
MANU/AIR/PRO/M V1.0

2
USER INSTRUCTIONSN
AIRPRO MAX
Dear Customer,
Thank you for purchasing this Trend product, we hope you enjoy many years of
creative and productive use.
Please remember to return your guarantee card within 28 days of purchase.
INTRODUCTION
The Airshield Pro Max is an innovative PAPR system that provides a unique all-in- one
respiratory, head, face, eye and hearing protection solution. It provides integrated
protection for users with an unrivalled level of comfort. Configurable for use in
multiple applications including industry, construction, pharmaceutical and welding.
Please read this manual and then store it in a safe place for future reference.
The respirator must be fitted and used in accordance with these instructions to obtain
the approved level of performance.
☎[phone]
If you require further safety advice, technical information or spare
parts, please call Trend Technical Support or visit www.trend-uk.com
Declaration of Conformity available at:
https://www.trend-uk.com/product/AIR_PRO_M

3
USER INSTRUCTIONS
AIRPRO MAX
Contents
USER INSTRUCTIONS....................................................................................................... 5
CAUTIONS ....................................................................................................................... 5
WARNINGS...................................................................................................................... 5
GENERAL DESCRIPTION .................................................................................................. 8
APPROVAL FOR USE........................................................................................................ 9
Special conditions for safe use ................................................................................... 9
SUITABILITY FOR USE .................................................................................................... 10
TRANSPORTATION ........................................................................................................ 10
PREPARATION FOR USE ................................................................................................ 11
Battery charging........................................................................................................ 11
Battery charger advisory symbols’ legend................................................................ 13
Battery installation and removal .............................................................................. 14
Visual inspection of breathing zone.......................................................................... 14
HEPA filter fitting and checking the respirator ......................................................... 15
Low airflow indicator check...................................................................................... 17
WEARING AND USING................................................................................................... 17
Fitting the respirator................................................................................................. 17
Crown strap adjustment ....................................................................................... 17
Quick release headband adjustment.................................................................... 19
Face seal ............................................................................................................... 19
Activating respirator ................................................................................................. 20
Status indicator (LED) ............................................................................................... 20
Removing the respirator........................................................................................... 22
SERVICING..................................................................................................................... 22
Cleaning .................................................................................................................... 22
Annual Servicing ....................................................................................................... 24
Before disassembly................................................................................................... 24
Replacing the face seal ............................................................................................. 24
Face shield replacement........................................................................................... 25
Helmet shells ............................................................................................................ 27

4
USER INSTRUCTIONSN
AIRPRO MAX
Head band assembly................................................................................................. 27
Replacing the comfort pads...................................................................................... 28
Brow infill removal and installation.......................................................................... 29
High efficiency particulate air filter replacement .................................................... 31
DISPOSAL ...................................................................................................................... 33
Disposal of respirator................................................................................................ 33
Disposal of rechargeable battery.............................................................................. 33
Disposal of contaminated filter ................................................................................ 33
TROUBLESHOOTING ..................................................................................................... 34
STORAGE (excluding battery) ....................................................................................... 34
TECHNICAL SPECIFICATION........................................................................................... 35
Environmental range (storage and use, excluding battery)...................................... 35
Power supply ............................................................................................................ 35
Battery Charger......................................................................................................... 36
Filters ........................................................................................................................ 36
AIRPRO MAX DECONTAMINATION & RETURN PROCEDURE ........................................ 36
SPARE PARTS................................................................................................................. 37
ACCESSORIES ................................................................................................................ 38

5
USER INSTRUCTIONS
AIRPRO MAX
USER INSTRUCTIONS
Please read these instructions and then store them in a safe place for future
reference.
The respirator must be fitted and used in accordance with these instructions to obtain
the approved level of performance.
CAUTIONS
•For adequate protection this respirator must fit or be adjusted to the size of the
user’s head.
•The respirator is made to absorb the energy of a blow by partial destruction or
damage to the shell and the harness, and even though such damage may not be
readily apparent, any respirator subjected to severe impact should be replaced.
•The attention of users is also drawn to the danger of modifying or removing any
of the original component parts of the respirator, other than as recommended
by the respirator manufacturer.
•Respirators should not be adapted for the purpose of fitting attachments in any
way not recommended by the respirator manufacturer.
•Do not apply paint, solvents, adhesives or self-adhesive labels, except in
accordance with instructions from the respirator manufacturer.
WARNINGS
•REPAIR IS BY REPLACEMENT OF DEFECTIVE PARTS ONLY.
•ONLY APPROVED AIRPRO MAX PARTS SHOULD BE USED.
•ALTERATIONS AND AFTER-MARKET MODIFICATIONS TO HEADWEAR PRODUCTS
MIGHT COMPROMISE THE PROTECTIVE FEATURES OF THE HEADWEAR.
•RESPIRATORS MUST BE STORED IN ACCORDANCE WITH THESE INSTRUCTIONS.
(INCLUDING DURING BREAK TIMES etc.) RESPIRATORS MUST BE REGULARLY
CLEANED IN ACCORDANCE WITH THESE INSTRUCTIONS.
•RESPIRATORS MUST BE DECONTAMINATED IN ACCORDANCE WITH THESE
INSTRUCTIONS.
•THE HEADBAND, CONCUSSION STRAP (Hard Hat only), FIXINGS AND MOUNTING
POINTS FORM PART OF THE STRUCTURE OF THE RESPIRATOR. ENSURE THAT THE
NEW ASSEMBLY IS FITTED CORRECTLY, OR THE INTEGRITY OF THE RESPIRATOR
MAY BE COMPROMISED.
•PRIOR TO USE A FLOW CHECK MUST BE PERFORMED.

6
N
AIRPRO MAX
•DO NOT HOLD OR SUSPEND THE RESPIRATOR BY THE HEADBAND OR FACE SEAL.
•DO NOT WEAR THE RESPIRATOR IF THE AIR FLOW IS SWITCHED OFF.
•AT VERY HIGH WORK RATES THE PRESSURE IN THE DEVICE MAY BECOME
NEGATIVE AT PEAK INHALATION FLOW.
•LONG HAIR MUST NOT BE TIED TO THE BACK OF THE USERS’ HEAD TO USE THIS
PRODUCT. TIED BACK HAIR MAY PROHIBIT THE NAPE RATCHET FROM WORKING
CORRECTLY AND CAUSING THE RESPIRATOR TO BE INSECURELY FITTED ON THE
USERS’ HEAD.
•MATERIALS, WHICH MAY COME INTO CONTACT WITH THE WEARER’S SKIN
COULD CAUSE ALLERGIC REACTION TO SUSCEPTIBLE INDIVIDUALS.
•SCRATCHED OR DAMAGED VISOR SHOULD BE REPLACED.
•HIGH SPEED PARTICLE IMPACT ON FACE SHIELD MAY TRANSMIT IMPACT ON
STANDARD OPHTHALMIC SPECTACLES WORN UNDERNEATH.
The AIRPRO MAX is equipped with a High Efficiency Particulate Air Filter (P3/HEPA)
and is powered by a re-chargeable battery incorporated into the respirator.
The respirator filters the surrounding air providing a flow of clean air into the user’s
breathing zone.
Depending on the model chosen, an adjustable face seal or a hood is designed to help
to maintain a positive pressure within the respirator, preventing penetration of the
ambient air.
NOTE: To avoid the danger of choking or suffocation please keep the respirator and
associated components away from babies and children.
AIRPRO MAX contains an adjustable quick release headband ensuring a comfortable
fit for head sizes between 53.5 cm and 63.5 cm.

7
AIRPRO MAX

8
GENERAL DESCRIPTIONN
AIRPRO MAX
GENERAL DESCRIPTION
The respirator must be fitted and used in accordance with these instructions to obtain
the approved level of performance.
APPROVED AIRPRO MAX PARTS MUST BE USED.
The AIRPRO MAX respirator box contains the following items:
Item
Description
Part Number
Powered Air
Purifying Respirator
Respirator module (TH3P)*.
With hard hat and face shield
AIR/PRO/M
Filter
High Efficiency Particulate Air Filter.
(THP3/HEPA)
AIR/PM/1
Rechargeable
battery
Rechargeable Lithium-Ion high capacity
battery.
AIR/PM/4
Battery charger
Mains and 12V inputs.
AIR/PM/5
Mains cable
Mains cable for the battery charger
WP‐AIR/PM/09
Cleaning plugs
3 cleaning plugs
WP-AIR/PM/14
User instructions
Printed instructions for correct use of
respirator
MANU/AIR/PRO/M
V1.0
Storage Bag
Protective storage bag for respirator
AIR/PM/8
Tear-off visor
protective film
Tear-off visor protective film, pack of
10
AIR/PM/3
Table 1
* TH3P –A powered filtering device incorporating a helmet or hood and a particulate
filter (P3,) where the inward leakage of the complete device is ≤0.2%.

9
APPROVAL FOR USE
AIRPRO MAX
APPROVAL FOR USE
This product has been shown to meet the requirements of Annex V of the Personal
Protective Equipment Regulation (EU) 2016/425 and is manufactured in accordance
with Annex VIII Module D, and thus is CE marked.
Annex V and VIII assessments conducted by BSI Group The Netherlands B.V, Say
Building, John M. Keynesplein 9 , 1066 EP, Amsterdam, Netherlands.
(Notified Body Number 2797)
Product assessed against the requirements of the following standards:
Respiratory Protection
EN12941:1998+A2:2008 –TH3P
AS/NZ 1716: 2012
Eye / Face protection
EN 166:2002 –1B3
AS/NZ 1337.1:2010
Head Protection
EN 397:2012+A1:2012
AS/NZ 1801-1997
Table 2
Declaration of Conformity available at:
https://www.trend-uk.com/product/AIR_PRO_M
Special conditions for safe use
1. The plastic helmet shell, transparent face shield and face seal could present a
potential electrostatic risk. Suitable precautions should be taken to minimise
this risk and the helmet should only be cleaned with a damp cloth.
2. Only battery Part No AIR/PM/4 should be fitted to the respirators.
3. The battery should only be recharged in a safe area.
4. AIRPRO MAX respirators are only tested to be used within the limited ambient
temperature range (+5°C to +40°C).
5. The unit should not be worn in the power off state. No respiratory protection is
to be expected and can result in rapid build-up of carbon dioxide and depletion
of oxygen within the hood.
6. Marking on filters used on this device are in accordance with EN 12941 and do
not relate to any other standards.

10
SUITABILITY FOR USEN
AIRPRO MAX
SUITABILITY FOR USE
This respirator must be used strictly in accordance with these instructions.
When using the approved AIRPRO MAX filter, the workplace concentrations of the
vapour must not exceed the O.E.L. (Occupational Exposure Limit). Intended for use
against dusts, mists and aerosols.
Available air filtration options:
- Pre-filter AIR/PM/2
- Odour pre-filter AIR/PM/5
Do not use this respirator for protection against unknown atmospheric contaminants.
Do not use this respirator when
•Concentrations of contaminants are unknown,
•Contaminants are immediately dangerous to life or health,
•Ambient atmosphere is likely to be deficient in oxygen.
Use this respirator only with the parts and accessories listed in these instructions.
The respirator is intended only for use by competent personnel.
Leave the contaminated area immediately if any of the following conditions apply:
•LED indicates red
•Any part of the respirator becomes damaged.
•Airflow into the respirator decreases or stops.
•Breathing becomes difficult.
•Dizziness or other physical distress or irritation occurs.
•The user tastes or smells contaminants.
Never modify or alter this product, except as directed in the service tasks contained in
these instructions.
Materials, which may come into contact with the wearer's skin could cause allergic
reactions to susceptible individuals.
TRANSPORTATION
For transportation purposes use the carry bag provided and protect the respirator
from physical or chemical damage.
A protective durable bag is available as an accessory.