TRENDnet TBW-103UB User manual

TBW-103UB
Quick Installation Guide

Table of Contents
(Version 01.10.2006)
English ......................................................................................................
Troubleshooting .........................................................................................
1
1
2
7
8
9
1. Before You Start
2. How to Install .....................................................................................
3. Using the Wireless Adapter ...............................................................
4. Using the Bluetooth Adapter ..............................................................
................................................................................

1. Windows 2000 or XP installed
2. One USB 1.1 port available
3. A CD-ROM Drive
System Requirements
1. Before You Start
English
1
802.11g Wireless & Bluetooth
Combo USB 2.0 Adapter
(TBW-103UB)
54Mbps 802.11g
Wireless Firewall Router
(TEW-432BRP)
Bluetooth Headset
High-Power Bluetooth
USB Adapter
(TEW-102UB)
USB Printer
54Mbps 802.11g Wireless
USB 2.0 Print Server
(TEW-P1UG)
Internet
wirelessbluetooth
Package Content
TBW-103UB
Utility CD-ROM
Quick Installation Guide
USB Cable

Note: Do not connect the Wireless USB Adapter to your computer until you
have finished installing the Utility and Driver.
2. How to Install
English
2
1. Insert the installation CD into your
CD-ROM drive and click 802.11g
WLAN Setup Driver.
2. Continue to click Next until you see
the window below.
Note: TRENDnet's Wireless Adapters have been fully tested under all
supported Windows Operating Systems and have been approved for their
functionality.

3. Click Continue Anyway or Click
Yes.
4. Click Finish.
5. Return to the software utility and
click Class 2 Bluetooth Setup
Driver.
English
3

English
4
7. Click Next for each installation
step, and select Yes, I want to
restart my computer now. Click
Finish.
6. Click OK.
8. Connect the TBW-103UB into your
computer's USB port.

English
5
9. Select No, not this time, and click
Next.
11. Click Next.
10. Select Install the software
automatically. Click Next.
Note: TRENDnet's Wireless Adapters have been fully tested under all
supported Windows Operating Systems and have been approved for their
functionality.

12. Click Continue Anyway or Click
Yes.
13. Click Finish.
14. After finalizing your software
installation, Restart your computer.
English
6

3. Using the Wireless Adapter
English
7
1. Double-click the wireless icon on
your system tray.
3. Please verify your connection
status.
2. Select 802.11g USB 2.0 WLAN
Dongle from the Network Adapter
drop down menu. Next double-
click the SSID you wish to connect
to within the Available Network
window.

4. Using the Bluetooth Adapter
English
8
1. Double-click the bluetooth icon on
your system tray.
3. Double-click the Bluetooth enabled
device. All available Bluetooth
services are highlighted in yellow
for your convenience. Double-click
the Bluetooth service you want to
enable.
2. Click the orange ball to search for
Bluetooth devices.
Note: For more detail on advanced features, please consult the User's Guide.
Your installation is now complete.