TRENDnet TFC-1000 User manual

Fiber Converters
TFC-1000 Series
ŸQuick Installation Guide (1)
ŸTechical Specifications (4)

Ÿ
ŸAn environment that is free from strong electromagnetic field generators
(such as motors), vibration, dust and direct exposure to sunlight
ŸTFC-1600 chassis (optional) or sturdy, level surface that can support the
weight of the Fiber Converter
ŸGigabit Ethernet Switch
ŸMulti-Mode or Single-Mode Fiber cable
ŸCat. 5e or Cat. 6 RJ-45 Ethernet Cable
An environment that is fairly cool and dry
Ÿ
ŸTFC-1600 chassis
ŸMini-GBIC module (e.g. TEG-MGBSX, TEG-MGBS10, TEG-MGBS40,
TEG-MGBS80, TEG-MGBS10D35, TEG-MGBS40D35) for Mini-GBIC slot
(TFC-1000MGB/TFC-1000MGA only)
Standard 19” rack
Minimum Requirements
Optional Equipment
1
Package Contents
Ÿ
ŸMulti-Language Quick Installation Guide
ŸPower Adapter
Fiber Converter
If any of the above contents are missing, please contact your reseller.
1. Before You Start
1. Connect an RJ-45 Ethernet cable from the Ethernet port on the fiber
converters to an Ethernet port on your switch (e.g TEG-S24Dg).
2. Hardware Installation
Installing two standalone Fiber Converters

2
2. Connect the fiber cable to the fiber converters.
3. Connect the power adapter to the back of the fiber converter.
Note:
1. For the TFC-1000MSC / S20/ S50 / S70, the TX and RX cables must be
reversed on the opposite fiber connection.
2. Cabling
a. Multi-Mode Optic Cable: TFC-1000MSC, TFC-1000MGB/TFC-1000MGA
with TEG-MGBSX module
b. Single-Mode Optic Cable: TFC-1000S20, TFC-1000S50, TFC-1000S70,
TFC-1000MGB/TFC-1000MGA with TEG-MGBS10/TEG-MGBS40/
TEG-MGBS80 module
c. Single Strand Optic Cable for TFC-1000S10D3, TFC-1000S10D5,
TFC-1000S40D3, TFC-1000S40D5, TFC-1000MGB /TFC-1000MGA with
TEG-MGBS10D35/TEG-MGBS40D35 module

3
3. Slide the media converter into an available slot and fasten the thumbscrew.
Your installation is now complete.
Installing Fiber Converter in a Chassis
1. Unscrew the bay cover from the desired bay on the chassis.
2. Unfasten the thumbscrew and remove the fiber converter from the metal
casing.

Note:
1. After changing the DIP Switch settings, power cycle the Fiber Converter
2. LLR stands for Link Loss Return. When LLR is enabled, the fiber port's
transmitter shuts down if its receiver fails to detect a valid receive link. If one
of the optical conductors is bad, the Fiber converter with LLR enabled will
return a no link condition to its link partner. LLR is used to detect link
problems only on the fiber port. If LLR is enabled on one Fiber converter, the
opposite Fiber converter mus have LLR disabled
3. LEDs and DIP switches
2
1
Off
Off
Action
On
Function
TX Auto-Negotiation
On
Switch
TX Forced Mode
LLR Enable
LLR Disable
Dip Switches
4
Color
Green Blinking
Sequence Function
PWR
(Power)
LINK/
ACT
Green
Off
Green
Off
Solid
Device powered Off
Solid Device powered On
2000Mbps (Full Duplex) Connection
(per port)
2000Mbps (Full Duplex) Data Transmitting/
Receiving (per port)
The link is disconnected
LED
n/a
n/a
LEDs

4. Technical Specifications
5
TFC-1000MSC
TFC-1000S20
TFC-1000S50
TFC-1000S70
TFC-1000S10D3
TFC-1000S10D5
Model Number Media Connectors
Min.
(Sensitivity)
Min. Max. Max. Budget
Power DistanceWavelength Optical Output
Power (dBm)
Optical Input Power
(dBm)
SMF RJ-45/SC-
(Simplex)
SMF RJ-45/SC-
(Simplex)
SMF RJ-45/SC
(Duplex)
MMF RJ-45/SC
(Duplex)
SMF RJ-45/SC
(Duplex)
SMF RJ-45/SC
(Duplex)
-12.5 -13.5 7.5
-20 -3 11.5
-23 -3 19
-24 -3 24
-21 -3 12
-21 -3 12-9 -3
-9 -3
05
-4 1
-9.5 -3
-9.5 -4 850nm
1310nm
1550nm
1550nm
TX-1310nm/
RX-1550nm
TX-1550nm/
RX-1310nm
220m
(62.5/125µm)
cable
20km
50km
70km
10km
10km
TFC-1000S40D3
TFC-1000S40D5
SMF RJ-45/SC-
(Simplex)
SMF RJ-45/SC-
(Simplex)
-23 -2 16
-23 -2 16
-7 -2
-7 -2 40km
40km
TX-1310nm/
RX-1550nm
TX-1550nm/
RX-1310nm
550m
(50/125 µm)
cable
Power Budget

Model Number:
TFC-1000MSC, TFC-1000S20, TFC-1000S50, TFC-1000S70
TFC-1000MGB, TFC-1000MGA, TFC-1000S10D3,
TFC-1000S10D5 1000S40D3, TFC-1000S40D5

TRENDnet warrants its products against defects in material and workmanship, under
normal use and service, for the following lengths of time from the date of purchase.
Fiber Converters– 3 Years Limited Warranty
AC/DC Power Adapter, Cooling Fan, and Power Supply carry a 1 year warranty.
If a product does not operate as warranted during the applicable warranty period,
TRENDnet shall reserve the right, at its expense, to repair or replace the defective
product or part and deliver an equivalent product or part to the customer. The
repair/replacement unit's warranty continues from the original date of purchase. All
products that are replaced become the property of TRENDnet. Replacement products
may be new or reconditioned. TRENDnet does not issue refunds or credit. Please contact
the point-of-purchase for their return policies.
TRENDnet shall not be responsible for any software, firmware, information, or memory
data of customer contained in, stored on, or integrated with any products returned to
TRENDnet pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to
service the product by any unauthorized service center. This warranty is voided if (i) the
product has been modified or repaired by any unauthorized service center, (ii) the product
was subject to accident, abuse, or improper use (iii) the product was subject to conditions
more severe than those specified in the manual.
Warranty service may be obtained by contacting TRENDnet within the applicable
warranty period and providing a copy of the dated proof of the purchase. Upon proper
submission of required documentation a Return Material Authorization (RMA) number
will be issued. An RMA number is required in order to initiate warranty service support
for all TRENDnet products. Products that are sent to TRENDnet for RMA service must
have the RMA number marked on the outside of return packages and sent to
TRENDnet prepaid, insured and packaged appropriately for safe shipment. Customers
shipping from outside of the USA and Canada are responsible for return shipping fees.
Customers shipping from outside of the USA are responsible for custom charges,
including but not limited to, duty, tax, and other fees.
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE
AS WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT
TRENDNET'S OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES
AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES,
Limited Warranty

EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW,
STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. TRENDNET NEITHER ASSUMES
NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER
LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR
USE OF TRENDNET'S PRODUCTS.
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND
EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES
NOT EXIST OR WAS CAUSED BY CUSTOMER'S OR ANY THIRD PERSON'S
MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED
ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE
OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER
HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET
ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER
BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND,
OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE,
PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH
DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND
OF THE PURCHASE PRICE PAID, AT TRENDNET'S OPTION. THIS DISCLAIMER OF
LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED
HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of
California. Some TRENDnet products include software code written by third party
developers. These codes are subject to the GNU General Public License ("GPL") or GNU
Lesser General Public License ("LGPL").
Go to http://www.trendnet.com/gpl or http://www.trendnet.com Download section and
look for the desired TRENDnet product to access to the GPL Code or LGPL Code.
These codes are distributed WITHOUT WARRANTY and are subject to the copyrights
of the developers. TRENDnet does not provide technical support for these codes.
Please go to http://www.gnu.org/licenses/gpl.txt or http://www.gnu.org/licenses/lgpl.txt
for specific terms of each license.

TRENDnet
20675 Manhattan Place
Torrance, CA 90501. USA
Copyright ©2011. All Rights Reserved. TRENDnet. Version 07.22.2011