TRENDnet TFC-210MSC User manual

This Fiber Converter transforms 10/100Base-TX UTP/STP media to
100Base-FX multi-mode media. The 10/100Base-TX port supports
auto-negotiation and auto-MDIX. Designed to connect up to 2KM,
the converters are the perfect Fast Ethernet, multi-mode solution.
TFC-210MSC (v1.0R)
10/100Base-TX to 100Base-FX Fiber
Multi-Mode SC-Type Fiber Converter
TFC-210MSC
rev:03.02.2007
• Compliant with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX, 100Base-FX standards
• One 10/100Base-TX Auto-Negotiation, Auto-MDIX RJ-45 port
• One 100Base-FX multi-mode SC-type Fiber port
• Supports LLCF (Link Loss Carry Forward)
• Provides Dip switches to set: UTP (Auto Negotiation/Full Duplex), Fiber (Half Duplex/Full Duplex) , LLCF (Enable/Disable), Mode
(Pure Mode/ Switch Mode)
• 802.3x flow control for 10/100Base-TX port
• Diagnostic LEDs
• Plug & Play, Hot Swappable
• Optional 19” Fiber Converter Chassis (TFC-1000) holds up to 10 Media Converters
• 5-Year Warranty
FEATURES

PACKAGE CONTENTS
• Power Adapter
• TFC-210MSC
• Multi-Language Quick Installation Guide
RELATED PRODUCTS
TFC-210S30
TFC-1000 10-Bay Fiber Chassis
10/100Base-TX to 100Base-FX ST -Type
Multi-Mode Fiber Converter
10/100Mbps-TX to 100Base-FX
SC-Type Single-Mode Fiber Converter
TFC-210MST
Frame Packet Size
Network Media
Protocol
Transfer Rate
Transfer Rate
Ports
Dip Switch
Diagnostic LED
Dimensions
Power Adapter
Weight
• IEEE 802.3 10Base-T • IEEE 802.3u 100Base-TX, 100Base-FX
• Dip Switch 1: ON: TX Port Fully Duplex OFF: TX Port Auto- Negotiation
• 10Base-T: UTP/STP Cat. 3, 4, 5, EIA/TIA-568 100-ohm
• 100Base-TX: UTP/STP Cat. 5, EIA/TIA-568 100-ohm
• 100Base-FX: 50/125ìm or 62.5/125ìm Multi-Mode Duplex SC-Type Fiber Cable, up to 2km
• CSMA/CD
• 64 to 1600 Bytes
• 1 x 10/100Base-TX RJ-45 Port • 1 x 100Base-FX Multi-Mode SC-Type Fiber Port
• 100Mbps (Half/Full Duplex)
• 9V DC, 700mA External Power Adapter
• Per Device: Power
• 2.7 Watts (max)
Standard
Hardware
SPECIFICATIONS
• Dip Switch 2: ON: FX Port Half Duplex OFF: FX Port Full Duplex
• Dip Switch 3: ON: LLCF Enable OFF: LLCF Disable
• Dip Switch 4: ON: Pure Converter Mode OFF: Switch Converter Mode
* After changing the DIP Switch settings, power cycle the Fiber converter.
• Per port (TX): 100Mbps, Link/Activity, Full Duplex/Collision; (FX): Link/Activity, Full Duplex/Collision
• 85 x 125 x 25mm (3.35 x 4.92 x 0.98in.)
• 300g (10.6oz.)
2km
50/125µm -23.5 -31 7.5
Sensitivity Power Budget (dBm) Distance
MMF
Wavelength
Media Power Output (dBm)
(1270nm~1380nm)
62.5/125µm 11
-20 -31
1310nm
Humidity
Temperature
Certification
• Operating : 0°C ~ 45°C (32°F ~ 113°F) • Storage : -40°C ~ 70°C (-40°F ~ 158°F)
• 5% ~ 90% RH
• CE, FCC
10/100Base-TX to 100Base-FX Fiber Multi-Mode SC-Type Fiber Converter
TFC-210MSC (v1.0R)
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet
products and is subject to change at any time, without notice. For the most recent product information please visit
http://www.trendnet.com.
©
Copyright TRENDnet. All Rights Reserved.
ORDERING INFORMATION
To Order Please Call:
1-888-326-6061
20675 Manhattan Place,Torrance, CA 90501 USA
Tel: [phone]
Fax: [phone]
Web:
Email: [email protected]
www.trendnet.com