TRENDnet TFC-110S15 - DATA SHEETS User manual

Fiber Converters
TFC-110 Series
ŸQuick Installation Guide (1)

Ÿ
ŸAn environment that is free from strong electromagnetic field generators
(such as motors), vibration, dust and direct exposure to sunlight
ŸTFC-1600 chassis (optional) or sturdy, level surface that can support the
weight of the Fiber Converter
Ÿ10/100Mbps Ethernet Switch
ŸMulti-Mode or Single-Mode Fiber cables
ŸCat. 5, 5e or 6 RJ-45 Ethernet Cable
An environment that is fairly cool and dry
Ÿ
ŸTFC-1600 chassis
Standard 19” rack
Minimum Requirements
Optional Equipment
1
Package Contents
Ÿ
ŸMulti-Language Quick Installation Guide
ŸPower Adapter
Fiber Converter
If any of the above contents are missing, please contact your reseller.
1. Before You Start
1. Connect an RJ-45 Ethernet cable from the Ethernet port on the fiber
converters to an Ethernet port on your switch (e.g TE100-S24g).
2. Hardware Installation
Installing two standalone Fiber Converters

2. Connect the fiber cable to the fiber converters.
3. Connect the power adapter to the back of the fiber converter.
2
Note:
1. For the TFC-110MM/MST/MSC/110S15/S15i/S30/S30i/S60/S60i/S100,
the TX and RX cables must be reversed on the opposite fiber connection.
2. TFC-15MS100 converts Multi-Mode to Single-Mode fiber, it can be connected
to a switch with Multi-Mode SC-type fiber connection (e.g TEG-424WS with
fiber modules) to extend the distance up to 15km with Single-Mode fiber.
3. Cabling
a. Multi-Mode Optic Cable: TFC-110MSC, TFC-110MST, TFC-110MM.
b. Single-Mode Optic Cable: TFC-110S15, TFC-110S30, TFC-110S60,
TFC-110S100, TFC-110S15i, TFC-110S30i, TFC-110S60i.
c. Single Strand Optic Cable for TFC-110S20D3, TFC-110S20D5,
TFC-110S40D3, TFC-110S40D5.

3
Installing Fiber Converter in a Chassis
1. Unscrew the bay cover from the desired bay on the chassis.
2. Unfasten the thumbscrew and remove the fiber converter from the metal
casing.
3. Slide the fiber converter into an available slot and fasten the thumbscrew.
Your installation is now complete.

3. LEDs and DIP switches
Blinking
Blinking
Blinking
Sequence Function
TFC-110S15i/
30i/60i
TFC-15MS100
TFC-110MM/
MST/MSC/
110S15/S30/
S60/S100/
20D3/20D5/
40D3/40D5
100M
PWR
(Power)
FDX/
COL
(TX)
FDX/
COL
(FX)
LINK/
ACT
(TX)
Off
Off
Off
Color
Green
Green
Green
Green
Green
Green
Green
Green
Off
Solid
Solid
Solid
Device powered Off
Solid
Off
Device powered On
Solid 100/200Mbps (Half/Full
Duplex) Connection
Data collision is detected
Data collision is detected
100/200Mbps (Half/Full
Duplex) or 10/20Mbps Data
Transmitting/Receiving
10/20Mbps (Half/Full
Duplex) Connection
Connection on TX end in half
duplex mode
Connection on Fiber end in
half duplex mode
The link is disconnected
Connection on TX end in full
duplex mode
Connection on Fiber end in
full duplex mode
100/200Mbps (Half/Full
Duplex) or 10/20Mbps (Half/
Full Duplex) Connection
LED
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/an/a
n/a
n/a
n/a
n/a
LEDs
4

Off
FAIL
(TX)
FAIL
(FX)
Solid
Solid
Off
The TX link is
disconnected
The TX link is
connected
The Fiber link
is disconnected
The Fiber link
is connected
Blinking
Blinking
100/200Mbps
(Half/Full
Duplex)
Connection
100/200Mbps
(Half/Full
Duplex) Data
Transmitting/
Receiving
LINK/
ACT
(FX)
LINK/
ACT
Off
Off
Solid
Solid
The link is
disconnected
100/200Mbps (Half/Full
Duplex) Data Transmitting/
Receiving
The link is disconnected
100/200Mbps (Half/Full
Duplex) Connection
Red
Green
Green
Green
Green
Action
Sequence Function
TFC-110S15i/
30i/60i
TFC-15MS100
TFC-110MM/
MST/MSC/
110S15/S30/
S60/S100/
20D3/20D5/
40D3/40D5
Color
LED
n/a
n/a
n/a
n/an/a
n/a n/a
n/a
n/a
n/an/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
LEDs (continued)
5

TFC-110MSC
TFC-110MST
TFC-110MM
TFC-110S30i
TFC-110S15
TFC-110S60i
TFC-110S30
TFC-110S20D3
TFC-110S60
TFC-110S20D5
Model Number Media Connectors
Min.
(Sensitivity)
Min. Max. Max. Budget
Power DistanceWavelength Optical Output
Power (dBm)
Optical Input
Power (dBm)
SMF
SMF
RJ-45/SC
(Duplex)
RJ-45/SC-
(Simplex)
SMF
SMF
RJ-45/SC
(Duplex)
RJ-45/SC-
(Simplex)
MMF
SMF
RJ-45/MT-RJ
(Duplex)
RJ-45/SC
(Duplex)
MMF RJ-45/SC
(Duplex)
MMF RJ-45/ST
(Duplex)
SMF
SMF
RJ-45/SC
(Duplex)
RJ-45/SC
(Duplex)
-32 -14 13
-32 -8 8.5
-31
-34
-14
(typical)
0
7.5
19
-32
-35
0
0
12
30
-34
-31
0
0
19
17
-35
-31
0
0
30
17
-5
-14
0
-8
-15
-14
-8
-8
-20
-5
0
0
-23.5
-15
14
-8
-23.5 -14
-23.5 -141310nm
1310nm
1300nm
1310nm
1310nm
1310nm
1310nm
TX-1310nm/
RX-1550nm
1310nm
TX-1550nm/
RX-1310nm
2 km
2 km
2 km
30 km
15 km
60 km
30 km
20 km
60 km
20 km
TFC-110S100
TFC-110S40D3
TFC-110S15i
TFC-110S40D5
SMF
SMF
RJ-45/SC
(Duplex)
RJ-45/SC-
(Simplex)
SMF
SMF
RJ-45/SC
(Duplex)
RJ-45/SC-
(Simplex)
-35
-34
0
-3
30
26
-32
-34
0
-3
12
26
-20
-8
0
-3
-5
-8
0
-3
100 km
40 km
15 km
40 km
1550nm
TX-1310nm/
RX-1550nm
1310nm
TX-1550nm/
RX-1310nm
Power Budget
4. Technical Specifications
6

Troubleshooting
1. After connecting the Fiber converter, the LEDs do not turn on. What
should I do?
1. Check that the power outlet is receiving power.
2. Make sure the power adapter is firmly connected to the Fiber converter
and the power outlet.
3. Make sure the Ethernet and the Fiber cables are connected.
2. All the LEDs are on, but I can't make a connection. What should I do?
1. Verify that you are using the proper fiber cable (e.g. multi-mode fiber
cable for multi-mode converter; single-mode fiber cables for single-mode
converters).
2. Verify that the TX and RX cables have been reverse on the opposite
Fiber connection (TFC-110MM, TFC-110MSC, TFC-110MST,
TFC-110S15, TFC-110S30, TFC-110S60, TFC-110S100, TFC-110S15i,
TFC-110S30i, TFC-110S60i).
3. Power down the fiber converters and the switches. Wait 15 seconds,
then plug the switches and the fiber converters back in.
3. What is the maximum distance that is supported by the fiber converter?
Please reference section 4 for distance information.
If you still encounter problems or have any questions regarding the Fiber
converters please contact TRENDnet's Technical Support Department.
7

TFC-110MSC, TFC-110MST, TFC-110MM, TFC-110S15, TFC-110S30,
TFC-110S60, TFC-110S100, TFC-110S30i, TFC-110S60i, TFC-110S20D3,
TFC-110S20D5, TFC-110S40D3, TFC-110S40D5, TFC-15MS100

TRENDnet warrants its products against defects in material and workmanship, under
normal use and service, for the following lengths of time from the date of purchase.
Fiber Converters– 3 Years Limited Warranty
AC/DC Power Adapter, Cooling Fan, and Power Supply carry a 1 year warranty.
If a product does not operate as warranted during the applicable warranty period,
TRENDnet shall reserve the right, at its expense, to repair or replace the defective
product or part and deliver an equivalent product or part to the customer. The
repair/replacement unit's warranty continues from the original date of purchase. All
products that are replaced become the property of TRENDnet. Replacement products
may be new or reconditioned. TRENDnet does not issue refunds or credit. Please contact
the point-of-purchase for their return policies.
TRENDnet shall not be responsible for any software, firmware, information, or memory
data of customer contained in, stored on, or integrated with any products returned to
TRENDnet pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to
service the product by any unauthorized service center. This warranty is voided if (i) the
product has been modified or repaired by any unauthorized service center, (ii) the product
was subject to accident, abuse, or improper use (iii) the product was subject to conditions
more severe than those specified in the manual.
Warranty service may be obtained by contacting TRENDnet within the applicable
warranty period and providing a copy of the dated proof of the purchase. Upon proper
submission of required documentation a Return Material Authorization (RMA) number
will be issued. An RMA number is required in order to initiate warranty service support
for all TRENDnet products. Products that are sent to TRENDnet for RMA service must
have the RMA number marked on the outside of return packages and sent to
TRENDnet prepaid, insured and packaged appropriately for safe shipment. Customers
shipping from outside of the USA and Canada are responsible for return shipping fees.
Customers shipping from outside of the USA are responsible for custom charges,
including but not limited to, duty, tax, and other fees.
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE
AS WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT
TRENDNET'S OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES
AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES,
Limited Warranty

EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW,
STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. TRENDNET NEITHER ASSUMES
NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER
LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR
USE OF TRENDNET'S PRODUCTS.
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND
EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES
NOT EXIST OR WAS CAUSED BY CUSTOMER'S OR ANY THIRD PERSON'S
MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED
ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE
OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER
HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET
ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER
BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND,
OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE,
PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH
DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND
OF THE PURCHASE PRICE PAID, AT TRENDNET'S OPTION. THIS DISCLAIMER OF
LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED
HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of
California. Some TRENDnet products include software code written by third party
developers. These codes are subject to the GNU General Public License ("GPL") or GNU
Lesser General Public License ("LGPL").
Go to http://www.trendnet.com/gpl or http://www.trendnet.com Download section and
look for the desired TRENDnet product to access to the GPL Code or LGPL Code.
These codes are distributed WITHOUT WARRANTY and are subject to the copyrights
of the developers. TRENDnet does not provide technical support for these codes.
Please go to http://www.gnu.org/licenses/gpl.txt or http://www.gnu.org/licenses/lgpl.txt
for specific terms of each license.

TRENDnet
20675 Manhattan Place
Torrance, CA 90501. USA
Copyright ©2011. All Rights Reserved. TRENDnet. Version 07.22.2011
This Class-A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe-A est conforme à la norme NMB-003 du Canada.