TRENDnet TFC-110S40D3 User manual

TFC-110S40D3/D5
10/100Mbps TX to 100Base-FX Dual-
Wavelength Single-Mode Fiber Converter
TEW-503PI (07-28-2005) TFC-110S40D3/D5
rev:12.27.2005
FEATURESFEATURES
TFC-110S40D3 or TFC-110S40D5 Bi-Directional Single-Fiber
Media Converter transforms 10/100Base-TX UTP/STP media to
100Base-FX media and vice versa. The 10/100Base-TX Port Auto-
Negotiating 10 or 100Mbps connection speed with Auto-MDIX
media type, the fiber supports single-mode SC type connection.
This converter will give your Switch/Hub the ability to interface with
fiber connection over a distance up to 40 km.
• Compliant with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX, 100Base-FX Standards
• Provides Dip Switch for Fiber(FDX/HDX), UTP (Auto Negotiation/Manual), Speed(10/100M), LLR (Enable/Disable), LLCF
(Enable/Disable)
• Support LLCF (Link Loss Carry Forward, Link Pass Through)
• Supports LLR (Link Loss Return) for FX Port
• Hot Pluggable & Wall-Mountable
• Optional 19” System Chassis (TFC-1600) holds up to 16 Media Converters
• 5-Year Warranty

Network Media
Weight
Protocol
Ports
Dip Switch
Transfer Rate
Diagnostic LED
Power Adapter
Temperature
Humidity
Safty Emissions
• IEEE 802.3 10Base-T • IEEE 802.3u 100Base-TX, 100Base-FX
• 7.5V DC, 1.5A External Power Adapter
• 10Base-T: UTP Cat. 3, 4, 5, EIA/TIA-568 100-ohm STP • 100Base-TX: UTP Cat. 5, EIA/TIA-568 100-ohm STP
• 7.2 watts (max)
• 120 x 88 x 25mm (4.7 x 3.46 x 0.98 inches)
• 5% ~ 90% RH
• 100Base-FX: 9/125μm or 10/125μm Single-Fiber Optic Cable, up to 40km
• CSMA/CD
• 1 x 10/100Base-TX RJ-45 Port • 1 x 100Base-FX Single-Fiber Bi-Directional Port SC Connector
• TX: Duplex Mode, Auto Negotiation or Manual, Speed, LLCF (enable/disable)
• 354g (12.5oz)
• FX: Duplex Mode, LLR (enable/disable), LLCF
• 10Base-T : 10Mbps/20Mbps (Half/Full Duplex) • 100Base-TX : 100Mbps/200Mbps (Half/Full Duplex)
• Per Unit : Power • Per Port : Link/Activity, FDX/HDX, Link Fail, Speed (only for TX Port)
• FCC,CE
• Operating : 0° ~ 40° C (32° ~ 104° F) • Storage : -25° ~ 70° C (-13° ~ 158° F)
Power Consumption
Dimensions
Standard
Hardware
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet
products and is subject to change at any time, without notice. For the most recent product information please visit
http://www.trendnet.com.
©
Copyright TRENDnet. All Rights Reserved.
10/100Mbps TX to 100Base-FX Dual-Wavelength Single-Mode Fiber Converter
TFC-110S40D3/D5
RELATED PRODUCTSRELATED PRODUCTS
PACKAGE CONTENTSPACKAGE CONTENTS
TFC-1000S10D3/D5
TFC-110S20D3/D5 10/100Mbps TX to 100Base-FX Dual-Wavelength
Single-Mode Fiber Converter
• User’s Guide
1000Base-T to1000Base-LX Single-Mode Fiber
Converter (10Km) with SC-Type Connector
• TFC-110S40D3/D5
• Power Adapter
ORDERING INFORMATIONORDERING INFORMATION
To Order Please Call:
1-888-326-6061
3135 Kashiwa Street,Torrance, CA 90505 USA
Tel: [phone]
Fax: [phone]
Web:
Email: [email protected]
www.trendnet.com
SPECIFICATIONSSPECIFICATIONS
Model Name
TFC-110S40D3 -15dBm -32dB 17dBm
TFC-110S40D5 -18dBm -32dB 14dBm
Sensitivity Power
TX: 1550nm; RX: 1310nm
Wavelength Pout
TX: 1310nm; RX: 1550nm