TRENDnet TFC-1000S60D3 Manual

TFC-1000S60D3
Rev: 08.22.2012
Intelligent 1000Base-T to 1000Base-LX
Dual Wavelength Single Mode SC Fiber
(60 km / 37.3 miles)
TFC-1000S60D3 (C1.1R)
The TFC-1000S60D3 Bi-Directional Intelligent Fiber Converter works
with the TFC-1600 chassis system or as a standalone unit. This
converter is a Dual Wavelength Single Mode SC-Type fi ber converter
that supports port-based SNMP reporting and spans distances up to 60
km (37.3 miles). This module must be used with the
TFC-1000S10D5 module. Ports include 1 x 1000Base-T (RJ-45) port
and 1 x 1000Base-LX (SC Simplex Type) port.
FEATURES
• Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX standards
• 1 x 1000Base-T RJ-45 port
• 1 x 1000Base-LX single-mode bi-directional simplex-SC type fi ber port
• Provides Dip switch to set: Fiber (Forced / Auto-Negotiation), LLR (Enable / Disable)
• Support LLCF (Link Loss Carry Forward, Link Pass Through)
• Support LLR (link Loss Return) for FX port
• Monitor and confi gure Ethernet or Fiber’s duplex mode, LLR, port on / off and receive link down information via management
module TFC-1600MM and chassis TFC-1600
• Status LED indicators for Power and Link / Activity
• Wall mountable
• Optional 19” system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters
• 3-year limited warranty
PRODUCT OVERVIEW
• Must use with TFC-1000S60D5
• SC-type dual-wavelength single-mode fi ber port connects over distances of up to 60 km (37.3 miles)
• 1000Base-T Gigabit copper port supports Full-Duplex mode
• Supports port level SNMP management
• Functions as a stand alone converter or with the TFC-1600 fi ber chassis

TFC-1000S60D3
rev: 08.22.2012
Intelligent 1000Base-T to 1000Base-LX Dual Wavelength Sin-
gle Mode SC Fiber (60 km / 37.3 miles)
TFC-1000S60D3 (C1.1R)
Model Media Wavelength
Optical Output Power
(dBm)
Optical Intput Power
(dBm)
Power Budget DistanceMin Max Min (Sensitivity) Max
TFC-1000S60D3 SMF TX: 1310 nm
RX: 1550 nm -7 -2 -23 -2 16 60 m
SPECIFICATIONS
HARDWARE
Standard • IEEE802.3ab 1000Base-T, IEEE 802.3z 1000Base-LX
Supported Frame Size • Standard Ethernet up to 10 Kbytes
Network Media • 1000Base-T: Cat. 6 EIA / TIA-568 100-ohm UPT / STP, up to 100 m
• 1000Base-LX: Single-mode fi ber optic cable 10/125 µm, up to 60 km
Protocol • CSMA / CD
Ports • 1 x 1000Base-T
• 1 x 1000Base-LX (simplex SC-type)
Dip Switch • Fiber (forced / auto-negotation), LLR (enable / disable)
Transfer Rate • 2000 Mbps (full-duplex)
Diagnostic LEDs • Per Unit: power
• Per Port: link / activity
Power Adapter • 7.5V DC, 1A external power adapter
Power Consumption • 2.7 Watts (max)
Dimensions • 120 x 88 x 25 mm (4.7 x 3.46 x 0.98 in.)
Weight • 354 g (12.5 oz)
Temperature • Operating: 0° ~ 40°C (32° ~ 104°F)
• Storage: -25° ~ 70°C (-13° ~ 158°F)
Humidity • Max 90% (non-condensing)
Certifi cations • CE, FCC

Intelligent 1000Base-T to 1000Base-LX Dual Wavelength Sin-
gle Mode SC Fiber (60 km / 37.3 miles)
TFC-1000S60D3 (C1.1R)
CONTACT INFORMATION
20675 Manhattan Place,Torrance, CA 90501 USA
Tel: [phone]
Fax: [phone]
Web: www.trendnet.com
Email: [email protected]
1-888-326-6061
PACKAGE CONTENTS
TFC-1000S60D3
Multi-Language Quick Installation Guide
Power Adapter (7.5 V, 1A)
RELATED PRODUCTS
TFC-1000S60D5 Intelligent 1000Base-T to 1000Base-LX Dual
Wavelength Single Mode SC Fiber
(60 km / 37.3 miles)
TFC-1000S50 Intelligent 1000Base-T to 1000Base-LX
Single-Mode SC Fiber Converter (50 km / 31 miles)
TFC-1600 16-Slot Chassis System for TFC series Fiber
Converter
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time,
without notice. For the most recent product information please visit http://www.trendnet.com Copyright ©TRENDnet.All Rights Reserved.