TRENDnet TV-IP301 - ProView Advanced Day/Night Internet Surveillance... User manual

TV-IP301
TV-IP301W
Quick Installation Guide

Table of Contents
English ......................................................................................................
Troubleshooting ........................................................................................
1
1
3
2
5
1. Before You Start
2. Hardware Installation .........................................................................
3. Configure the Internet Camera ..........................................................
.................................................................................
Table of Contents
Version 05.05.2006

System Requirements
Application
TV-IP301/TV-IP301W
Quick Installation Guide
Metal Stand
Utility CD-ROM
AC Power Adapter
10/100Mbps Ethernet
CPU: Intel Pentium 1GHz or above
Memory: 256MB or above
VGA Resolution: 800 x 600 or above
Package Contents
1. Before You Start
English
1
1 x 2dBi Detachable Antenna
(TV-IP301W)
Web Browser: Internet Explorer 5.0 or above
Wireless Router
(TEW-432BRP)
Cable/DSL
Modem
Front Gate
Monitoring
(TV-IP301W)
Office
Monitoring
(TV-IP301W)
Workstation with
PCI Adapter
(TE100-PCIWN)
Nursery Room
Monitoring
(TV-IP301)
Warehouse
Monitoring
(TV-IP301)

2. Hardware Installation
English
2
1. Mount the Internet Camera to the
metal stand.
2. Attach the Antenna. (TV-IP301W)
3. Connect a RJ-45 network cable
from a Switch/Router to the
Ethernet port of the Internet
Camera.
4. Connect the AC Power Adapter to
the Internet Camera and then to a
power outlet.

English
3
1. Open your web browser, type
http://192.168.1.30 in the Address
bar, and press Enter.
3. Configure the Internet Camera
Note: It is recommended that you configure the Internet Camera from a wired
computer. Before the Internet Camera can be configured, a Static IP address
must be assigned on your computer's network adapter in the subnet of
192.168.1.x. Since the Internet Camera's default IP address is 192.168.1.30,
make sure no other network devices are assigned an IP address of
192.168.1.30. (Refer to the Troubleshooting section on how to configure
TCP/IP settings on your PC.)
2. Enter user name and password,
then click OK.
User name: admin
Password: admin
3. Click System and then click
Network. Configure the network
settings to be in the same subnet
as your network. Then click Save.

English
4
4. Click System and then click
Wireless. Configure your wireless
settings to match your wireless
network's settings and then click
Save. (TV-IP301W only)
5. Click Live Show Active X.
Note: For detailed information regarding the TV-IP301/TV-IP301W
configuration and advanced settings, please refer to the Troubleshooting
section, User's Guide on the Utility CD-ROM, or TRENDnet's website at
http://www.trendnet.com.
Note: The TV-IP301W will not work wirelessly until you disconnect the Ethernet
cable from the back of the camera.
Your installation is now complete.

Q1:
Q2:
A2:
Q3:
A3:
Q4:
A4:
Q5:
A5:
The image is blurry. How do I fix this?
You can adjust the Internet Camera's focus by rotating the lens.
How do I configure TCP/IP settings on my computer?
When I click on Live Show Active X, the image does not load?
First, make sure that you are using a browser that supports Active X. Second,
make sure that Active X is installed.
How do I connect the TV-IP301W to my wireless router or access point?
Make sure that you configure the camera to have the same SSID, encryption
mode and key (if enabled). Follow the instructions in section 2 to configure the
camera with the SSID and encryption key.
After I successfully configured the TV-IP301W to match my wireless network
settings, I can not connect to the camera.
First, verify that the wireless settings match your wireless network settings.
Second, verify in the wireless section of the browser configuration that the Disable
Wireless Communication option is not checked. Third, make sure to disconnect
the Ethernet cable from the camera and verify that the LINK LED is blinking green.
If you still encounter problems or have any questions regarding the TV-IP301/
TV-IP301W, please contact TRENDnet's Technical Support Department.
5
Troubleshooting
1. Go into the Control Panel and double-
click the Network Connections icon,
and then right-click the Local Area
Connection icon and then click
Properties.
2. Click Internet Protocol (TCP/IP) and
then click Properties. Then click on
Use the following IP address, and
make sure you assign your network
adapter an IP address in the subnet of
192.168.1.x.

Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may
cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
6

Copyright ©2006. All Rights Reserved. TRENDnet.
3135 Kashiwa Street
Torrance, CA 90505
USA
Product Warranty Registration
Please take a moment to register your product online.
Go to TRENDnet’s website at http://www.trendnet.com
TRENDnet Technical Support
US Canada
24/7 Tech Support
Toll Free Telephone: [phone]
Europe (Germany France Italy Spain Switzerland UK)
Toll Free Telephone: [phone]
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Worldwide
Telephone: +(31) (0) 20 504 05 35
.
. . . . .