TRENDnet TV-IP422 User manual

- 1 -
PREFACE
The Day/Night Pan/Tilt Internet Camera Server with Audio (TV-IP422/TV-
IP422W) provides day and night security over a large area. See, hear and
talk to people in your camera’s viewing field day or night from any
Internet connection. Secure a larger area with pan and tilt Internet
cameras. Pan the camera side-to-side a remarkable 330° and tilt up-and-
down 105°.
The TV-IP422W provides high quality video streams over a secure wireless
connection. Advanced intuitive software includes motion detection
recording, email alerts and scheduled recordings. This camera’s brilliant
image quality, pan/tilt functionality, day/night recording capabilities and
built-in 2-way audio make it ideal for home, small office and business use.
Chapter 1 Introduction to Your Camera describes the features of the
camera. You will also know the components and functions
of the camera.
Chapter 2 Hardware Installation helps you install the camera
according to your application environment. You can use this
camera at home, at work, at any where you want.
Chapter 3 Accessing the Camera lets you start using your camera
without problem. The camera can be set up easily and work
within your network environment instantly.
Chapter 4 Configuring the Camera guides you through the
configuration of the camera using the Web browser on your
PC.
Chapter 5 SecurView Softwae using the convenience software to
monitor your camera
Chapter 6 Appendix provides the specification of the camera and some
useful information for using your camera.
NOTE The illustrations and configuration values in this guide are for reference only. The
actual settings depend on your practical application of the camera.

- 2 -
Contents
PREFACE ..................................................................................... 1
CHAPTER 1 .................................................................................. 4
INTRODUCTION............................................................................. 4
1.1 PACKAGE CONTENTS .................................................................4
1.2 GETTING TO KNOW YOUR CAMERA......................................5
1.3 FEATURES AND BENEFITS............................................................7
1.4 SYSTEM REQUIREMENT...............................................................8
CHAPTER 2 ................................................................................ 10
HARDWARE INSTALLATION........................................................... 10
2.1 INSTALLING THE WALL MOUNT KIT............................................10
2.2 CONNECTING THE CAMERA TO LAN/WLAN...............................11
2.3 APPLICATIONS OF THE CAMERA.................................................12
CHAPTER 3 ................................................................................ 13
ACCESSING THE CAMERA............................................................. 13
3.1 USING IPSETUP ......................................................................13
3.2 ACCESSING TO THE CAMERA .....................................................18
3.3 CONFIGURING THE IP ADDRESS OF THE PC .................................23
CHAPTER 4 ................................................................................ 24
CONFIGURING THE CAMERA......................................................... 24
4.1 USING THE WEB CONFIGURATION..............................................24
4.2 USING SMART WIZARD ............................................................25
4.3 BASIC SETUP ..........................................................................29
4.4 NETWORK SETTINGS ................................................................34
4.5 PAN/TILT SETTINGS.................................................................40
4.6 SETTING UP VIDEO &AUDIO .....................................................42
4.7 EVENT SERVER CONFIGURATION................................................47
4.8 MOTION DETECT.....................................................................51
4.9 EVENT CONFIG .......................................................................52
4.10 TOOLS...................................................................................58
4.11 USB......................................................................................60
4.12 INFORMATION ........................................................................61

- 3 -
CHAPTER 5 ................................................................................ 62
SECURVIEW™SOFTWARE ............................................................. 62
5.1 INSTALLATION....................................................................62
5.2 USING INSTALLATION ........................................................67
ITEM FEATURES ................................................................................68
TO ADD A CAMERA ...........................................................................75
TO REMOVE A CAMERA......................................................................78
TO LINK TO THE WEB PAGE OF THE CAMERA..........................................79
TO RECORD VIDEO ............................................................................80
TO CONFIGURE THE RECORDING SETTINGS ............................................85
TO PLAYBACK THE RECORDED VIDEO ...................................................87
TO SET UP MOTION DETECTION OPTIONS ..............................................88
ACCOUNT .......................................................................................90
OTHER............................................................................................90
INFORMATION .................................................................................91
APPENDIX.................................................................................. 93
A.1 SPECIFICATION .......................................................................93
A.2 GPIO TERMINAL APPLICATION..................................................95
A.3 GLOSSARY OF TERMS..........................................................96

- 4 -
CHAPTER 1
INTRODUCTION
1.1 Package Contents
The package includes the following:
TV-IP422 or TV-IP422W Camera
Utility CD-ROM
Multi-Language Quick Installation Guide
External Antenna (for TV-IP422W only)
GPIO Adapter
RJ-45 Cable
12V 1.5A Power Adapter (3.5mm)
Wall Mount Kit
NOTE: If there is item missing, please contact your local authorized
dealer.

- 5 -
1.2 Getting to Know Your Camera
Front View
*The camera’s USB port supports WCN (Windows Connect Now)
technology, which allows you to use the notebook computer to set up
and store your wireless networking configuration on the USB storage
device, and then retrieve the wireless settings when you connect the
USB storage device to the camera.
NOTE After long pressing the Unmount button for four seconds, the
Power LED starts flashing. When the Power LED resumes the
steady amber light, you can remove the USB device safely.
Manual Focus
Turn the ring to
adjust the focus
manually
Power LED
indicates the camera
is powered on with
the steady amber
light.
Light Sensor
is used to trigger on and off
the Infrared LEDs according
the environmental light
level.
USB Port*
allows you to connect an
external USB device. It
provides the power
distribution up to 500mA.
Infrared LEDs
allow your camera to
capture clear image in
a dark environment.
Internal Microphone
allows the camera to
receive sound and voice.
Link LED
indicates the camera’s
network connectivity
with the flashing green
light.
Antenna
for TV-IP422W only
Lens Assembly

- 6 -
Rear View
USB Unmount Button
is used to remove the
connected USB device
safely.
External Antenna
Connector connects
the external antenna.
GPIO Connectors
is used to connect the
external device.
Audio-out Connector
connects an external
active speaker.
Reset Button
will restart the camera when it
is pressed quickly; when it is
pressed and held for five
seconds, the camera will
resume the factory default
settings.
DC Power Connector
connects the AC
power adapter, in
order to supply power
to the camera.
Ethernet Cable Connector
connects the network
cable, which supports the
NWay protocol so that the
camera can detect the
network speed
automatically.

- 7 -
1.3 Features and Benefits
MPEG4/MJPEG Dual-codec Supported
The camera provides you with excellent images by the MPEG4/ MJPEG
dual-codec selectable technology, allowing you to adjust image size and
quality, and bit rate according to the networking environment.
2-way Audio Capability
The built-in microphone of the camera provides on-the-spot audio via
the Internet, allowing you to monitor the on-site voice. In addition, you
can connect an external speaker to the camera to speak through the
camera.
Day & Night Surveillance Supported
The seven Infrared LEDs around the standard lens assembly enable the
camera to capture crystal clear images in the dark environment or at
night. When the Light Sensor detects the environmental light level
becomes low, the camera captures the images in black & white mode
using these infrared LEDs.
Optimal Viewing
With the pan/tile functions, you can easily monitor everywhere via the
camera by moving the camera lens to the left/right (165/165 degrees) or
up/down (90/15 degrees). In addition, you can assign up to eight
positions for the camera, enabling you to move the camera lens to the
desired position quickly.
Supports Multiple Profiles
The camera supports multiple profiles simultaneously, so that you can
separately set up different image settings (such as image quality and
frame rate) for the three video types of the camera: MPEG4, MJPEG, and
3GPP.
I/O Connectors Provided
The camera provides the I/O connectors on the rear panel (IN/OUT),
which provide the physical interface to send and receive digital signals
to a variety of external alarm devices. You can connect a special featured

- 8 -
device, and then configure the settings and control the device from the
GPIO Trigger window of Web Configuration.
Remote Control Supported
By using a standard Web browser or the bundled SecurView software
application, the administrator can easily change the configuration of the
camera via Intranet or Internet. In addition, the camera can be upgraded
remotely when a new firmware is available. The users are also allowed to
monitor the image and take snapshots via the network.
Supports Connection to the External Devices
With the auxiliary Input/output connectors, you can connect the camera
to a variety of external devices, such as the external speaker and the USB
device.
Multiple Platforms Supported
The camera supports multiple network protocols, including TCP/IP,
SMTP e-mail, HTTP, and other Internet related protocols. Therefore, you
can use the camera in a mixed operating system environment, such as
Windows 2000 and Windows XP and Windows Vista and Windows 7.
Multiple Applications Supported
Through the remote access technology, you can use the cameras to
monitor various objects and places for your own purposes.
For example, babies at home, patients in the hospital, offices and banks,
and more. The camera can capture both still images and video clips, so
that you can keep the archives and restore them at any time.
1.4 System Requirement
Networking
LAN: 10Base-T Ethernet or 100Base-TX Fast Ethernet.
WLAN: IEEE 802.11b/g.
Accessing the Camera using Web Browser
Platform: Microsoft® Windows® 2000/XP/Vista/Windows 7
CPU: Intel Pentium III 800MHz or above
RAM: 512MB

- 9 -
Resolution: 800x600 or above
User Interface: Microsoft® Internet Explorer 6.0 or above
Accessing the Camera using SecurView®
Platform: Microsoft® Windows® 2000/XP/Vista
Hardware Requirement:
1 camera connected: Intel Pentium III 800MHz; 512MB RAM
2 ~ 4 cameras connected: Intel Pentium 4 1.3GHz; 512MB RAM
5 ~ 8 cameras connected: Intel Pentium 4 2.4GHz; 1GB RAM
9 ~ 16 cameras connected: Intel Pentium 4 3.4GHz; 2GB RAM
Resolution: 1024x768 or above
NOTE: Monitoring multiple cameras may require a high performance
CPU.

- 10 -
CHAPTER 2
HARDWARE INSTALLATION
2.1 Installing the Wall Mount Kit
The camera comes with a Wall Mount Kit, which allows you to place your
camera anywhere by mounting the camera through the three screw
holes located in the base of the Wall Mount Kit.
Wall Mount Kit
Screw
Screw
Screw

- 11 -
2.2 Connecting the Camera to LAN/WLAN
Use the provided Ethernet cable to
connect the camera to your local area
network (LAN).
When you connect the AC power
adapter, the camera is powered on
automatically. You can verify the
power status from the Power LED on
the front panel of the camera.
Once connected, the Link LED starts
flashing green light and the camera is
on standby and ready for use now.
If you use a wireless network in your
application environment, you need
to attach the included external
antenna to the camera.
When the camera is powered on, the
camera will automatically search any
access point with “default” SSID.
Connecting the Ethernet Cable
Connecting the External Antenna

- 12 -
NOTE If the camera cannot to your wireless network, you need to install
the camera in LAN and proceed with WLAN settings.
2.3 Applications of the Camera
The camera can be applied in multiple applications, including:
Monitor local and remote places and objects via Internet or Intranet.
Capture still images and video clips remotely.
Upload images or send email messages with the still images attached.
The following diagram explains one of the typical applications for your
camera and provides a basic example for installing the camera.
Applications

- 13 -
CHAPTER 3
ACCESSING THE CAMERA
3.1 Using IPSetup
The camera comes with a conveniently utility, IPSetup, which is included
in the Installation CD-ROM, allowing you to search the camera on your
network easily.
1. Insert the Installation CD-ROM into your computer’s CD-ROM drive to
initiate the Auto-Run program.
2. Click the IP Setup from the Auto-Run menu screen. Then IP Setup
Wizard will appear. Click “Next” when the Welcome to the IPSetup
Setup Wizard appears.

- 14 -
3. Click “Browse”to choose the desired destination location. By default,
the destination location is C:\Program Files\TRENDnet\IPSetup. Then
Click “Next”.

- 15 -
4. Click “Next” to confirm the IPSetup software to be installed to the
computer.
5. When the Installation Complete window appears, click “Finish”.

- 16 -
6. After installing the IPSetup utility, the application is automatically
installed to your computer, and creates a folder in “ Start
\Program\TRENDnet\IPSetup”.
7. Click Start > Programs > TRENDnet > IPSetup, and then click
IPSetup
8. The IPSetup window will appear. It will search the Camera within the
same network.

- 17 -
-Camera Display Area: It shows the connected camera(s) within the
same network
Double click the IP address, it will link to Camera’s Web Configuration
page.
-Change IP: Click this button to bring up the following window. It
allows you to change the IP Address. You can select either Static IP
or click DHCP. Then, enter the Administrator ID & password. By
default ID/password is: admin. When complete, click “Change”.
-Search: Click this button to search the connected camera in the
same network.”
-Exit: Click this button to exit the program.

- 18 -
3.2 Accessing to the Camera
1. Open the Web browser on your computer (example showed in the
User’s Guide is based on the Internet Explorer)
2. Type the Camera IP address (For example, if your DHCP server assign
is as192.168.10.30) in the web browser URL and then press [Enter].
3. You can also double click on the selected camera from IPSetup which
will open IE browser.

- 19 -
4. When the login window appears, enter the default User name (admin)
and password (admin) and press OK to access to the main screen of
the camera’s Web Configuration.
NOTE If you are initially access to the camera, you will be ask to install a
new plug-in for the camera. Permission request depends on the
Internet security settings of your computer. Click Yes to proceed.