TRENDnet TV-IP662WI User manual

Cover Page

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Table of Contents
i
Contents
Product Overview .................................................................................1
Package Contents .......................................................................................................... 1
Features ......................................................................................................................... 1
Product Hardware Features........................................................................................... 2
Installation............................................................................................3
Wired Connection ..................................................................................................... 3
WPS Connection........................................................................................................ 4
Wall mount installation............................................................................................. 5
Using the AutoRun Wizard ....................................................................6
Wireless Connection .................................................................................................... 13
Using WPS ............................................................................................................... 13
Connecting Wireless Network Manually................................................................. 17
Mobile Apps........................................................................................ 22
Configuration...................................................................................... 23
Main Web User Interface............................................................................................. 25
Setup............................................................................................................................ 27
Wizard.......................................................................................................................... 27
Step 1: LAN Settings ................................................................................................ 28
Step 2: Internet Settings ......................................................................................... 28
Step 3: DDNS Settings ............................................................................................. 29
Step 4: Camera Name Settings................................................................................ 29
Step 5: Time Settings............................................................................................... 29
Step 6: Setup Complete........................................................................................... 32
System ......................................................................................................................... 32
Admin...................................................................................................................... 33
Time and Date ......................................................................................................... 34
Network....................................................................................................................... 35
Network ...................................................................................................................36
Wireless Setup .........................................................................................................37
Dynamic DNS............................................................................................................38
Audio/Video................................................................................................................. 38
Audio and Video.......................................................................................................39
Image Setup .............................................................................................................40
Action........................................................................................................................... 41
Recording .................................................................................................................41
Video Clip .................................................................................................................44
Snapshot ..................................................................................................................46
Preset Position .........................................................................................................48
SD Management ......................................................................................................49
Motion Detection ........................................................................................................ 50
Sound Detection .......................................................................................................... 50
Tools ............................................................................................................................ 51
System......................................................................................................................51
Firmware Update .....................................................................................................52
Advanced ..................................................................................................................... 52
Device Info ...............................................................................................................53
Log............................................................................................................................53
Knowledge Base.................................................................................. 54
Install TRENDnetVIEW Pro Software ........................................................................... 54
How to setup/access the camera remotely................................................................. 55
Technical Specifications ...................................................................... 59
Troubleshooting ................................................................................. 66

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662WI
1
Product Overview
TV-IP662WI
Package Contents
In addition to your camera, the package includes:
Multi-Language Quick Installation Guide
CD-ROM (Utility & User’s Guide)
Network cable (1.8m / 6ft)
Power adapter (12V DC, 1A)
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor that the item was purchased.
Features(百萬畫素無線夜視旋轉網路攝影機)
The IP camera records at 1280x720 pixels (VGA), 30 FPS (frames per second). You can
manage up to 32 TRENDnet cameras with the included complimentary camera
management software. The IP camera also includes adjustable motion detection
recording areas, email alerts, and scheduled recording sessions. Some other features of
the IP camera are Pan/Tilt auto-patrol, date-and-time overlays, one-way audio, an
adjustable lens, and four times digital zoom. A wall/ceiling mounting kit is included and
the camera’s white housing blends into most environments.
Easy Installation
The IP camera includes a CD-ROM with a setup wizard that guides you through the
installation process.
Wide Platform Support
The IP camera supports TCP/IP networking, HTTP, and other Internet related protocols
and can be integrated easily into other Internet/Intranet applications because of its
standards-based features.
10/100 Ethernet Support
The IP camera supports 10/100Mbps Ethernet.
Web Configuration
Once the setup is complete, administrators can use a standard Web browser to; access
images and video, configure the camera over an intranet or over the Internet.
Administration by a Web browser over the Internet means the IP camera can be
accessed and administered from anywhere in the world.
Broad Range of Applications
With today’s high-speed Internet connections, many scenarios for the application of
your network camera exist, including industrial and public monitoring of properties such
as homes, offices, banks, hospitals, child-care centers and amusement parks.
Pan & Tilt
The IP camera can pan side-to-side at a remarkable 330 degrees.
Recording Quality
The IP camera can record 1280x720 (720p) video resolution.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662WI
2
Product Hardware Features
Rear Panel View
1. Micro SD Slot –Insert a micro SD card into this slot to store video/image data.
2. Power Port –Connect the included power adapter from your camera to an
available power outlet. Note: Use only the adapter that came with your camera.
3. Line Out –Insert an external microphone to this connection.
4. Rear Air Vent –This is to cool the camera.
5. WPS (Wi-Fi Protected Setup) –Push and hold this button for 3 seconds to
activate WPS.
6. WPS LED –The WPS LED will blink green when WPS is activated.
7. Reset Button –Use an item such as a paperclip to push and hold this button for
3 seconds and release to reset your camera to its factory defaults.
8. Antenna –2dBi detachable antenna.
9. LAN Port –Connect Ethernet cables to your wired network devices.
Front Panel View
1. IR LED –Built-in 6 IR LED for night vision uses. (for TV-IP862IC)
2. Power/Link LED –This LED indicator is solid blue when your camera is powered
on. If this LED indicator is off, there is no power to your camera. This LED
indicator is blinking green when there is connection/data to your camera.
3. Microphone –Built-in microphone for audio can be turn on or off.
4. Light Sensor –Detects the light source to turn IR on or off.
5. Camera Lens –The camera lens.
6. Focus Ring –Turn to adjust the focus of the camera.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662WI
3
Installation
Wired Connection
1. Connect the Ethernet Cable. If you intend to use the network camera as a wired
device, connect one end of the included Ethernet cable into the Ethernet port
on the rear panel of the camera and connect the other end to an available port
on your network. If you prefer to use the camera on a wireless network, see
below for instructions on connecting the power adapter.
2. Attach the Power Supply. Attach the included power supply to the DC 12V 1.0A
receptor on the rear panel of the camera and then connect it to a wall outlet or
power strip. A blue LED will light up under the lens indicating that the camera
has power.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662WI
4
WPS Connection
An alternative method of connecting your camera to your network is by using WPS. WPS
is a quick, simple and secure method of adding devices to a network. If you have a
router which supports WPS follow the steps below, otherwise, please use the wired
mode of setting up the camera.
1. Attach the Power Supply
2. Press the WPS button on your wireless device then press the WPS button on
the camera.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662WI
5
Wall mount installation
To attach the metal plates carry out the following:
Remove the two rubber pads under the base of the Camera.
Slide the metal plate onto the base of the camera, making sure that the two
holes on the base of the camera align with the two screw holes on the base of
the camera.
Secure the metal plate to the base of the Camera with the two screws provided.
The camera can now be mounted to the ceiling or a wall. See the diagram
below for more information.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662WI
6
Using the AutoRun Wizard
Insert the included CD-ROM into your CD/DVD drive. The Install Wizard program will
run automatically.
Note: If the Install Wizard does not run, you may have auto-run disabled on your
machine. In this case, browse to the CD drive and run InstallWizard.exe to begin the
installation wizard.
Begin by selecting a language from the drop-down list. There is a choice of five
languages –English, French, German, Spanish, and Russian.
English
French

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662WI
7
German
Spanish

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662WI
8
Russian
1. Click Install Camera and follow the on-screen steps to continue the installation.
2. This step references information on the camera itself. Go to your camera and
check the details at the bottom of the device. Click Next to continue, Back to go
to the previous screen or Home to return to the main menu. Also enclosed, is a
sticker with the same details attached.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662WI
9
3. The most important part of the setup process is the network connection type.
There are three options:
a. Connect camera to your network using a network cable
b. Connect camera to your wireless network using Wi-Fi Protected Setup
(WPS) button (Verify your router has a WPS button. If not, select the
next option).
c. Connect camera to your wireless network manually.
The basic connection type is the first option, using a network cable. Let’s begin
the installation process using the network cable connection first. Click this
radio button and click Next to continue, Back to go to the previous screen or
Home to return to the main menu.
4. Follow the instructions in the next screen to Power up the Camera. Connect
one end of the power adapter to the camera and watch the LED flicker. Click
Next to continue, Back to go to the previous screen or Home to return to the
Main Menu.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662WI
10
5. Connect one end of the network cable to your camera and the other end to
your router. Click Next to continue, Back to go to the previous screen or Home
to return to the Main Menu.
6. The wizard searches the network for your camera.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662WI
11
7. If you only have one camera on your network, the wizard will automatically
select it. Otherwise, if you have more than one camera, it provides several
options from the list. The wizard provides the Model Name and MAC Address
of the camera. If you do not see any of your camera(s) in the wizard, click Retry
to scan for the camera again. Click Next to continue, Back to go to the previous
screen or Home to return to the Main Menu.
8. Password Settings. Follow the instructions on the screen. The default
username and password is admin. Tick the Change Password checkbox to enter
the new password details. The password should be between 1 and 30
characters. Click Next to continue, Back to go to the previous screen or Home
to return to the Main Menu.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662WI
12
If you have entered the incorrect admin details, you are prompted to change the
configuration, as shown below.
9. The initial setup is complete. Click the link to navigate to the camera’s Web
User Interface for further configuration or click Next to continue to the next
step.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662WI
13
The Mobile App section allows the user to download the TRENDnet Mobile App either
for Apple iOS or Android™
1
devices. To use this feature, the user must have a QR Code
Scanner App on their mobile device. This is also available from the Apple App Store or
Google Play™
2
.
You are now ready to use your camera. Click Finish to exit.
1
Android is a trademark of Google Inc.
2
Google Play is a trademark of Google Inc.
Wireless Connection
Using WPS
The WPS connection type is the second option, using a wireless router. Click this radio
button and click Next to continue, Back to go to the previous screen or Home to return
to the main menu.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662WI
14
1. Follow the instructions on the screen to Power up the Camera. Click Next to
continue, Back to go to the previous screen or Home to return to the Main
Menu.
2. Follow the instructions and click Next to continue. If you wish to go to the
previous screen, click Back or Home to return to the main menu.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662WI
15
3. If you only have one camera on your network, the wizard will automatically
select it (as shown below). Otherwise, if you have more than one camera, it
provides several options from the list. The wizard provides the Model Name
and MAC Address of the camera. If you do not see any of your camera(s) in the
wizard, click Retry to scan for the camera again. Click Next to continue, Back to
go to the previous screen or Home to return to the Main Menu.
4. Password Settings. Follow the instructions on the screen. The default
username and password is admin. Tick the Change Password checkbox to enter
the new password details. The password should be between 8 and 16
characters. Click Next to continue, Back to go to the previous screen or Home
to return to the Main Menu.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662WI
16
5. The initial setup is complete. Click the link to navigate to the camera’s Web
User Interface for further configuration or click Next to continue to the next
step.
6. The Mobile App option allows the user to download the TRENDnet Mobile App
either for Apple iOS or Android™ format. To use this feature, the user must
have a QR Code Scanner App on their mobile device. This is also available from
the Apple App Store or Google Play™. You are now ready to use your camera.
Click Finish to exit.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662WI
17
Connecting Wireless Network Manually
The manual wireless connection type is the third option, using a wireless router. Click
this radio button and click Next to continue, Back to go to the previous screen or Home
to return to the main menu.
1. Follow the instructions in the next screen to Power up the Camera. Click Next
to continue, Back to go to the previous screen or Home to return to the Main
Menu.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662WI
18
2. Connect one end of the network cable to your camera and the other end to
your router. Click Next to continue, Back to go to the previous screen or Home
to return to the Main Menu.
3. If you only have one camera on your network, the wizard will automatically
select it (as shown below). Otherwise, if you have more than one camera, it
provides several options from the list. The wizard provides the Model Name
and MAC Address of the camera. If you do not see any of your camera(s) in the
wizard, click Retry to scan for the camera again. Click Next to continue, Back to
go to the previous screen or Home to return to the Main Menu.