TRENDnet TK-210K User manual

TK-210K
Quick Installation Guide

Table of Contents
English ......................................................................................................
Troubleshooting ........................................................................................
1
1
2
4
7
1. Before You Start
2. How to Install .....................................................................................
3. Operation ..........................................................................................
................................................................................
Table of Contents
Version 09.28.2007

System Requirements
Application
TK-210
2 Sets of KVM Cables
2 Sets of USB Cables
2 Sets of Audio Cables
Stand
VGA or SVGA Compatible Monitor
Microphone and Speaker (optional)
Windows 98SE/ME/2000/XP/2003 Server/Vista, Linux, or Mac OS
Package Contents
1. Before You Start
English
1
Microphone
2-Port USB and PS/2
KVM Switch with Audio
(TK-210K)
PC 1
Speakers
PC 2 Cables
Cables
LCD Monitor
Keyboard Mouse
Scanner
Printer

1. Turn off both computers and their
peripherals, and disconnect all
power cords.
3. Connect the shared PS/2
keyboard, monitor, and PS/2
mouse into the KVM Switch's
console port .
4. Use the provided KVM and audio
cables to connect your PC to the
KVM Switch.
2. How to Install
English
2
2. Connect the USB device (optional),
microphone (optional) and speaker
(optional) into the KVM switch.
5. Turn ON the first computer and
wait until startup completes. PC 1

6. Press the face panel button on the
KVM Switch to select the second
computer.
Your installation is now complete.
English
3
PC 2
7. Turn ON the second computer and
wait until startup completes.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.trendnet.com/register
Thank you for choosing TRENDnet

Note: For PC switching, you can use the face-panel buttons of the KVM Switch,
or a hot-key command sequence via keyboard.
A keyboard hot key command consists of three keystrokes:
Hot Key command = ScrLk + ScrLk + Command key(s)
After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again.
If you do not press a key within 2 seconds, the switch will exit hot-key mode.
3. Operation
English
4
Face-Panel Buttons
Hot-Key Command Sequence
Press the corresponding face-panel
button to select your PC or USB
devices.

Note:
1. Hot key command works on top row numbers keys only.
2. A PS/2 Keyboard is required for proper hot key function. If you use a USB
keyboard, hotkey feature is disabled.
3. When the binding of PC, USB Hub & Audio/Mic port switching is enabled by
the hotkey sequence, any PC, USB Hub and Audio/Mic switching are bound
together.
4. For non-PnP OS (Linux, Windows NT4.0), please use the following
commands to reset the mouse setting.
ScrLk ScrLk
+++
M1
ScrLk ScrLk
+++
M2
ScrLk ScrLk
+++
M3
2-key mouse setting:
3-key wheel mouse setting:
5-key wheel mouse setting:
English
5

English
6
Command Hot-Keys Description
Front-Panel
Buttons
Quick Reference Sheet for TK-210
Select PC
Select Hub Port
Next higher channel
Bind PC & Hub Port
Switching
Beep Sound On/Off
UnBind PC & Hub
Port Switching
Autoscan
Next lower channel
Stop Autoscan
ScrLk ScrLk X
+ +
(x is a top-row number key)
x = 1 ~ 2 for PC channel number
ScrLk ScrLk
+ +
(Arrow up)
ScrLk ScrLk
+ +
(Arrow down)
ScrLk ScrLk
+ + X
ScrLk ScrLk
+ + B
ScrLk ScrLk
+ + S
Press any key on keyboard
Select the active PC channel x
(selects both PC & Hub port,
if “binding” is enabled)
Press the PC button
to toggle the PC
channel
Press the USB button
toggle the USB Hub
port
Select the active USB hub port
(select both PC & Hub port, if
“binding” is enabled)
Select the next higher
connected channel. (select
both PC and USB Hub port,
if “binding” is enabled)
Enable the binding of PC &
Hub port switching. (Once
this feature is enabled, any
PC and/or Hub port switching
is bound together)
Toggle on/off the beep sound
for Hot-Keys and port switching
confirmation
Disable the binding of PC &
Hub port switching.
(Factory default)
Autoscan through each
connected channel to browse
each channel (delay = 10 \
seconds).
Select the next lower
connected channel. (select
both PC and Hub port, if
“binding” is enabled)
Terminate Autoscan.
Press any button.
(Fx is a function key) Fx = F1 ~ F2
ScrLk ScrLk
+ +
FX
ScrLk ScrLk
+ +
Z
- - -
- - -
- - -
- - -
- - -
- - -

Q1:
A1:
Q2:
A2:
Q3:
A3:
Q4:
A4:
Q5:
A5:
Q6:
A6:
Where is the power supply? I did not find one in the box.
The TK-210K does not require a power supply. It draws power from your computer's
USB connection. As long as your KVM switch is connected to the USB or PS/2 port, it will
receive the necessary power to function.
I have the KVM switch connected properly, but my keyboard and mouse don't work.
Please make sure your USB port is working properly by testing it with your other USB
devices. Once you confirm that the USB port is functional, please reboot your computers,
and try to use the KVM switch again.
I have the KVM switch connected properly, but my microphone and speakers don't
work.
Can I connect and disconnect the USB cables while the computers are turned on?
Yes, you can connect or disconnect the USB cables while the computers are turned on
because the USB interface is Plug-and-Play and Hot-Pluggable.
Will the KVM switch remember the keyboard settings between computers?
Yes, the KVM switch will remember the keyboard settings when switching between your
computers. (i.e.: Cap lock, Num key, etc.)
How do I switch from one computer to another with the KVM switch?
PC User: Push Buttons, Hot-Key Commands
Mac User: Push Buttons
Linux User: Universal Hot-Key Commands
First, make sure your sound card is properly installed on your computers. Second, make
sure your speakers and microphone work properly when connected directly to your
computer. Third, make sure your speakers and microphone are connected in correct jack on
the KVM switch. Make sure the audio cables are connected to the correct jack on your
computer.
If you still encounter problems or have any questions regarding the TK-210K, please contact
TRENDnet's Technical Support Department.
7
Troubleshooting

8
Limited Warranty
- 2-Year Warranty
TRENDnet warrants its products against defects in material and workmanship, under
normal use and service, for the following lengths of time from the date of purchase.
TK-210
If a product does not operate as warranted above during the applicable warranty period,
TRENDnet shall, at its option and expense, repair the defective product or deliver to
customer an equivalent product to replace the defective item. All products that are
replaced will become the property of TRENDnet. Replacement products may be new or
reconditioned.
TRENDnet shall not be responsible for any software, firmware, information, or memory
data of customer contained in, stored on, or integrated with any products returned to
TRENDnet pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to
service the product through any unauthorized service center. This warranty is voided if
(i) the product has been modified or repaired by any unauthorized service center, (ii) the
product was subject to accident, abuse, or improper use (iii) the product was subject to
conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting TRENDnet office within the applicable
warranty period for a Return Material Authorization (RMA) number, accompanied by a
copy of the dated proof of the purchase. Products returned to TRENDnet must be pre-
authorized by TRENDnet with RMA number marked on the outside of the package, and
sent prepaid, insured and packaged appropriately for safe shipment.