trentios SIN-TC1 User manual

1
CASEMENT AIR CONDITIONER USER’S MANUAL
MODEL: SIN-TC1

2
FOREWORD
Casement air-conditioners are pieces of high value. In order to ensure your lawful rights
and interests, please have the professional technicians to do the installation for you.
This instruction manual is the universal-purpose version for the units that you purchase
might be slightly different from the ones described in the manual, but it does not affect
your proper operations and usage.
Please read carefully the sections corresponding to the specific model you choose, and
keep the manual properly so as to facilitate your reference at later time.
Attention:
(1) The appliance is not intended for using by young children or infirm persons without
supervision.
(2) Young children should be supervised to ensure that they do not play with the
appliance.
(3) The plug shall be accessible after install the appliance.
(4) The appliance shall be installed in accordance with national wiring regulation.
(5) The appliance can’t be installed in laundry.
(6) If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.

3
CASEMENT AIR-CONDITIONER
This casement air-conditioner is a small size appliance, which can adjust the
temperature and humidity in a room. Its flexibility characteristics make it easily used on
different occasions in different rooms. It also has multiple functions, including cooling,
dehumidifying and fanning ventilation. This unit was designed especially to be used in a
family house, office, etc. It has a compact design compared to others with the same
cooling capacity. Power consumption is low and the noise especially low.
Features of heating operation: the machine heating operation, the principle is that the
air is heating by the heating pump before sent out. The function is not affected by
ambient temperature.
Features of cooling operation: Other air conditioning patterns are recommended when
the indoor temperature is either below 170C(630F) or above 350C(950F).
ATTENTION
Before you use your casement air-conditioner, please read this instruction manual
carefully so that you get the best from the unit.
This instruction manual is used for guidance and does not form part of a contract.
We reserve the right to make technical changes without prior notice.

1
PRECAUTION ON INSTALLATIONS
22 0-2 40 VAC?
Please install the unit 75-150cm
above the ground.
The intake and discharge vents unit
should not be obstructed.
The unit be plugged into its own
individual outlet that has a voltage
rating suitable for normal operation
(220V-240V)
The unit should not be directly
exposed to sunlight or rain.
The fixing between the mounting kit and
window should be secured. The six
screws shown below must be well fixed.

2
PARTS IDENTIFICATION
OPERATION

3
INSTRUCTION
AIR CONDITIONER CONTROLS
1、POWER
Press this button for three seconds ，the unit will be turned on，and press this button
for three seconds again ，the unit will be turned off.
When the unit running, press this button, you can choose one of the operation modes: AUTO,
COOL, DEHUMIDIFYING and FAN.
2、Temperature set control
Use for adjusting the temperature.

4
The default display on control panel is setting temperature.
When “+” or “-“key is pressed, the set temperature is displayed and may be adjusted.
OPERATION AND INDICTION SECTIONS OF REMOTE CONTROLLER
1. POWER
2. MODE
3. TIMER
4. SPEED
5. TEMP+
6. TEMP-
7. SLEEP
On/Off switch
MODE selector
Hourly programming
Fan speed selector
Temperature selector up
Temperature selector down
Night operation selector

5
USE OF CONTROL PANEL
POWER SOURCE
The AC socket must be firm and reliable.
Don’t connect the casement air-conditioner to a multiply socket outlet which is also being used for other electrical
appliances.
Inset the AC power plug securely into the AC socket using the unit, when it beeps after two seconds, press ”ON/OFF”
button, the unit begins to run.
AUTO OPERATION
1. Repeatedly press”MODE” button to choose the AUTO mode, The AUTO mode LED light and corresponding
operation mode light will light up.
2. The product will deliver cooled air when room temperature is above 260C.
3. The product will operate in DRY MODE when room temperature is above 230C to 260C.
4. The product will simply circulate room temperature air when room temperature is 230C or below
5. Press “SPEED” button to choose a proper fan speed, high, middle, low speed.
COOLING OPERATION
1. Repeatedly press”MODE” button to choose the cooling mode, The COOL mode LED light will light up.
2. Repeatedly press”TEMP+” or “TEMP-“button to set a proper room TEMP. at 160C-310C.
3. Press “SPEED” button to choose a proper fan speed, high, middle, low speed.
NOTE:
In order to improve the cooling efficiency, be careful that:
a) If your room is directly exposed to the sun, draw the curtains please.
b) Do no place near other heat source.
DEHUMIDIFYING OPERATION
1. Keep the windows and the doors closed to aid in effectively dehumidifying the room.
2. Repeatedly press the “MODE” button to choose the dehumidifying mode, The DEHUM mode LED light will light up.,
the fan speed cannot be adjusted.
FAN OPERATION
1. Repeatedly press the “MODE” button, select the heat mode. The FAN mode LED light will light up..
2. Press “SPEED” button to choose the fan speed: high-middle-low.
TIME SET FUNCTION
To set time to start the machine with the unit off (but power supplied), press “TIMER” button, the LCD window will show
“ OFF”, press the “TIME “ button, set the time to start as you like. The setting range is 1-12 hours.
If have set switch on/off after 12 hours, press this key again there could cancel the timing.

6
OPERATION PROCEDURES
■ELECTRICAL CIRCUIT OPERATION FO DEHUMIDIFICATION
1．Press the “ON/OFF” button.
2．Press the “Function” button to select the “DRY” for dehumidification function
3．Press the “ON/OFF” key again if you wish to stop.
25
20
15
10
5
20 24 27 30 (DB )℃
RH 90%
RH 80%
RH 70%
RH 60%
L/ d ay (RH) %
85
65
45
40
5
1 hr 2 hr 3 hr 4 hr
DBT line
DBT lin e
RH li ne
RH line
DBT )℃(
24
16
1℃
* qua ntity of dehu midi f icatio n for un it op erating * at 24 -85% for ro om are a of 16.2m2
℃
INSTALLTION INSTRUCTIONS
Casement air-conditioners are pieces of high value. In order to ensure your lawful rights and
interests, please have the professional technicians to do the installation for you.
Width:
390mm
Indoors
Outdoors
Height:
840~1370mm
◆MAIN STEPS OF INSTALLATION
●Unit can be installed on the left or right side of a sliding window.

7
1. Fix the mounting Kit securely 2.Insert the unit on the bottom of kit.
in the window. the mounting