TRI SLAVE User manual

Mobile control pedal for press brakes
Built in sturdy painted steel structure that wraps the housed equipment
with a shaped shell protecting them from possible crushing due to accidental falls of workpieces,
this pedal unit can be easily integrated to all the press brakes.
TRIVENETA IMPIANTI S.r.l.
Administrative Headquarters: Via Scopella, 22 - 37060 Castel d'Azzano VR –Italy
Operational Headquarters: Via Bovolino, 18/B - 37060 Buttapietra VR - Italy
Phone: [phone] - Fax [phone] - Web Site: www.trivenetaimpianti.com E-mail: [e-mail]
SLAVE Pedal Unit
COD. 006 S
▪Double pedal with maintained action
(according with EN 292-1)
▪Predisposition for the main control commands
▪on a large panel made in the upper part
Main Features
▪With safety PLC that controls the
third position of the pedal
COD. 033 S

SLAVE Pedal Unit
COD. 006 S
TRIVENETA IMPIANTI S.r.l.
Administrative Headquarters: Via Scopella, 22 - 37060 Castel d'Azzano VR –Italy
Operational Headquarters: Via Bovolino, 18/B - 37060 Buttapietra VR - Italy
Phone: [phone] - Fax [phone] - Web Site: www.trivenetaimpianti.com E-mail: [e-mail]
Mobile control pedal for press brakes
A very important feature is
the function of pedal’s descent.
From the illustrations on the side it can be understood that
the passage through pressure from the central working position
to the stop position occurs through a pressure on the pedal
equal to no more than 350 newtons.
The generated consent will have to block the press brake’s downhill.
The pedal unit is supplied with a power cable covered with a heavy super flexible metal sheath,
to facilitate re-positioning operations, complete with socket and multipolar socket
to be applied to the electrical panel.
Wrong position
Press the pedal to stop
Stop
Lowered lever and
pressed pedal:
start