Tria HAIR REMOVAL LASER 4X User manual

White
Intended Skin Tones: Not Safe:
Ivory Beige Light
Brown
Medium
Brown
Dark Brown
or Black
©2013 Tria Beauty, Inc., 4160 Dublin Boulevard, Suite 200, Dublin, CA 94568 USA
All rights reserved. Tria, Tria Beauty, and the Tria logo are trademarks of Tria Beauty, Inc.
HAIR REMOVAL LASER 4X
Quick Start Guide
useful information CHeCK Your sKin tone
The Tria Laser 4X is intended only for light to medium skin tones and medium to dark
hair. It does not work on white, grey, blonde or red hair. If your skin tone matches any of
the skin tones labeled “Not Safe” for treatment, then DO NOT USE the Tria Laser 4X.
TRIA BEAUTY CUSTOMER CARE
United States
877-321-8742
[e-mail]
triabeauty.com
United Kingdom/Europe
0800 0484 322
[e-mail]
triabeauty.co.uk
• Hair follicles that have been deactivated
by the Tria Laser 4X will not grow back.
• Laser hair removal does not cause hair
to fall out immediately. After your first
treatment, there will be no visible change
to the hair.
• Some users may feel the sensation of a
rubber band snapping on the skin. Others
will feel a warm, prickling sensation. As the
amount of hair decreases, the sensation
will also decrease.
• In a clinical study, higher levels were found
to be 2-3 times more effective.So for best
results, we recommend you use the highest
setting that you can tolerate.
• Treat every 2 weeks for up to 3 months or
until you reach the desired results.
10471D Clinical studies on file
SKIN TONE CHART
FOR USE ONLegs•Arms•BikiniLine•Underarms•Feet•Hands•Chest•Back
•Stomach•Women’sFacialHair(cheeklinedownward)

12345
Get to Know Your tria laser 4X Pulse Counter GuiDe
BATTERY CHARGER
Charges the Tria Laser
4X. Unplug before use.
SKIN SENSOR
Unlocks the
Tria Laser 4X
TREATMENT WINDOW
Delivers laser light
during treatments
DISPLAY
Guides you
through treatments
CHARGER SOCKET
Insert battery
charger here
Bottom of Laser
BATTERY INDICATOR
Blinks when the
battery is low and
needs to be recharged
PULSE COUNTER
Counts the number of
pulses in a treatment
session
POWER BUTTON
Adjusts levels and turns
the Tria Laser 4X on/off
Display
Tria Laser 4X
Before first treatment
Fordetaileddirectionsandimportantsafetywarnings,pleasereadthe
complete Instructions for Use guide before use.
CHARGE: ChargetheTriaLaser4Xuntilthebatterylightisfull(~2hours).
Unplug before use.
ACTIVATE: A one-time, 5-minute activation is required before your first treatment.
In the US: visit triabeauty.com/activate or call Customer Care at 1-877-321-8742.
In the UK: visit triabeauty.co.uk/activate or call Customer Services at 0800 0484 322.
How to treat
Before every treatment, shave, clean and dry the area you wish to treat.
Before your first full treatment on any new area, perform a patch test in that area.
Repeat treatments every 2 weeks for up to 3 months or until you’re satisfied with results.
1TURN ON DEVICE
Unplug the Tria Laser 4X from the
battery charger and press the
power button.
2UNLOCK
Unlock the device by holding the Skin
Sensor against the skin in the area you
wish to treat. If the Tria Laser 4X is safe
for your skin tone, a tone will sound and
theTriaLaser4Xwillunlock(ifdevice
doesn’tunlock,seeInstructions for Use
formoreinformation).
3SET THE TREATMENT LEVEL
Press the power button to adjust levels.
For best results, use the highest setting
that you can tolerate.
4TREAT. HOLD FOR 2 BEEPS.
• Touch and hold the treatment window
to the skin until you hear two beeps.
• After the two beeps have sounded,
lift the laser and place it back on the
skin so that it overlaps the previous spot
(seeoverlappingpatterndiagram).
5KEEP GOING TO COVER THE AREA
Use the Tria Laser 4X Pulse Counter as a
guide to how many pulses you may need
to cover each area per treatment.
UNDERARMS
Pulses: 100 per side
Minutes: 4–5 per side
UPPER LIP
Pulses: 25
Minutes: 2–3
UPPER LEG
Pulses: 600 per side
Minutes: 25–30 per side
BIKINI
Pulses: 200 per side
Minutes: 8–10 per side
LOWER LEG
Pulses: 600 per side
Minutes: 25–30 per side
LOCK
Signals locked position
when not in use, unlocks
with the skin sensor
TREATMENT LEVEL
Displays energy settings
SKIN SENSOR
INDICATOR
Indicates that skin
sensor is ready for use
Pulse counts and times are only approximations–your actual treatment area and number of pulses may vary.
Always follow the treatment instructions and warnings provided in the Instructions for Use booklet.
When treating larger areas like legs and back, you may need more than 600 pulses to cover the area.