Triax 383900 User manual

For further information
and updated manuals go to
triax.com/support
How to install EoC
return path lter
Copyright © 2021 TRIAX. All rights reserved. The TRIAX Logo and TRIAX, TRIAX Multimedia
are registered trademarks or trademarks of the TRIAX Company or its aliates.
All specications in this guide are subject to change without further notice.
TRIAX A/S | Bjørnkærvej 3 | DK-8783 Hornsyld | Denmark
Quick Guide
EoC return path lter
Model Item no.
Version ENDate
EoC return path filter
EoC return path filter
383900
383910
890902B 01/2021

TDX
TV signal
Amplifier
ISP modem
EoC 200 MHz
Return Path
filter
1. Take the TV in coax cable from the
amplier and mount it to the IN – TV
+ EoC on the return path lter.
2. Take the TV out coax cable from the
amplier and mount it to the OUT –
TV + EoC on the return path lter.
3. Make a new coax cable and mount it
between the TV in on the amplier
and the TV OUT TO amplier on
the return path lter.
4. Make a new coax cable and mount it
between the TV out on the amplier
and the TV in from amplier on the
return path lter.
How to install EoC
return path lter
Amplifier
GND terminal for safety earth bonding (supported in 383910)
Power Pass (supported in 383910)