Tripp Lite N422-10M User manual

Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +[phone]
E-mail: [email protected]
Model #: N422-10M
10M (33-ft.) Fiber Optic Mode Conditioning Patch Cable (ST/LC)
Highlights
10 Meter LC/ST Mode Conditioning Cable
62.5/125 and 8.3/125
Run 1000Base-LX Gigabit Ethernet over MMF by offsetting signal loss
IEEE 802.3z Gigabit Ethernet Compliant
Description
Tripp Lites Mode Conditioning Cables are designed for use in Gigabit Ethernet 1000BASE-LX applications. They are fully compliant with IEEE 802.3z
application standards. Mode Conditioning Cables are needed in applications where new high-speed Gigabit 1000BASE-LX routers and switches are
being deployed into existing multimode plants. The need for this patch cord is due to the single-mode launch nature of the -LX or long-wave (1300
nm) transceiver modules used for Gigabit Ethernet. Launching a single-mode laser into the center of a multimode fiber can cause multiple signals to
be generated that confuses the receiver at the other end of the fiber. These multiple signals, caused by Differential Mode Delay (DMD) effects,
severely limit the cable distance lengths for operating Gigabit Ethernet. A mode conditioning patch cord eliminates these multiple signals by allowing
the single-mode launch to be offset away from the center of a multimode fiber.
Applications
Use when connecting a LX type fiber transceiver ( Singlemode light ) to a Multimode backbone
Package Includes
10 Meter LC/ST Mode Conditioning Cable
Features
Use Singlemode Transceivers on Multimode Fiber Backbones
62.5/125 and 8.3/125
Offsets the Singlemode Laser launch from the center of a Multimode fiber
Available in a variety of connector combinations
Specifications
OVERVIEW
Intended Application Computer Networking (Fiber)
INPUT
Cable Length (m) 10
PHYSICAL

Color Orange & Yellow
Style Fiber Optic
CONNECTIONS
Connector A
LC
Connector B
ST
Number of Connectors 4
WARRANTY
Product Warranty Period
(Worldwide)
Lifetime limited warranty
Related Items
Optional Products
Product Type Related Model Description Qty.
Fiber Optic Cables &
Adapters
N422-01M 1M (3-ft.) Fiber Optic Mode Conditioning Patch Cable
(ST/LC)
1
Fiber Optic Cables &
Adapters
N422-02M 2M (6-ft.) Fiber Optic Mode Conditioning Patch Cable
(ST/LC)
1
Fiber Optic Cables &
Adapters
N422-03M 3M (10-ft.) Fiber Optic Mode Conditioning Patch Cable
(ST/LC)
1
Fiber Optic Cables &
Adapters
N424-01M 1M (3-ft.) Fiber Optic Mode Conditioning Patch Cable
(SC/LC)
1
Fiber Optic Cables &
Adapters
N424-04M 4M (13-ft.) Fiber Optic Mode Conditioning Patch Cable
(SC/LC)
1
Fiber Optic Cables &
Adapters
N424-05M 5M (16-ft.) Fiber Optic Mode Conditioning Patch Cable
(SC/LC)
1
Fiber Optic Cables &
Adapters
N426-02M 2M (6-ft.) Fiber Optic Mode Conditioning Patch Cable
(SC/SC)
1
Fiber Optic Cables &
Adapters
N426-03M 3M (10-ft.) Fiber Optic Mode Conditioning Patch Cable
(SC/SC)
1
Fiber Optic Cables &
Adapters
N426-05M 5M (16-ft.) Fiber Optic Mode Conditioning Patch Cable
(SC/SC)
1
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=3515.
Copyright © 2012 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.