Tripp Lite P952-002 User manual

Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +[phone]
E-mail: [email protected]
Model #: P952-002
2-ft. SATA to eSATA Transition Cable (7Pin/7Pin)
Highlights
Connect external eSATA drives to your SATA internal controller card
2ft SATA-II rated 3Gbps cable
Plug-n-Play
7pin SATA "L" type connector (Internal) to 7pin "I" type connector (external)
Description
With Tripp Lite's P952-002, SATA to eSATA bracket/cable, you can connect an external eSATA hard drive to your internal SATA controller. Simply
plug the standard 7-pin SATA connector into an available port on your controller card or motherboard, and the bracket into an available external I/O
slot. No software to load...completely plug and play. 24" cable provides plenty of length to connect any where inside a PC case. 26AWG cable rated
to handle current 3Gbps SATA speeds.
Features
Connect external eSATA drives to your SATA internal controller card
SATA-II rated 3Gbps, 24", 26AWG cable
Plug-n-Play
7pin SATA "L" type connector (Internal) to 7pin "I" type connector (external)
Specifications
OVERVIEW
Intended Application Connecting Peripherals
INPUT
Cable Length (ft.) 2
Cable Length (m) 0.61
PHYSICAL
Color Red
Style SATA
CONNECTIONS
Connector A
7 PIN SATA STRAIGHT (MALE)

Connector B
7 PIN ESATA (MALE)
Number of Connectors 2
WARRANTY
Product Warranty Period
(Worldwide)
Lifetime limited warranty
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=3985.
Copyright © 2012 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.