Tripp Lite U050-07N-OTG User manual

Quick Start Guide
USB 2.0 OTG Cable
with 2-in-1 Connector
USB A (Male) + Micro-USB B (Male) to Micro-USB B (Male)
Model: U050-07N-OTG
USB A (Male) + Micro-USB B (Male) to USB A (Female)
Model: U052-06N-OTG-AM
Features
Using the 2-in-1 Connector
• USB 2.0 charging and data
transfer rates up to 480 Mbps
• Supports On-the-Go (OTG)
devices
• Plug-and-Play; No drivers or
software required
To extend the Micro-USB connector:
1Place a thumbnail or
fingernail in the white slit
Alocated on the bottom of
the USB A connector. Slide
the connector forward.
2Using your fingers, pull the
Micro-USB connector out B.
Note: You can alternately use
a fingernail in the second slit to
further extend the Micro-USB
connector.
3The white button Cwill lock
the Micro-USB connector
into place.
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2015 Tripp Lite. All rights reserved.
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an ISOBAR6ULTRA
surge protector—a $50 value!
www.tripplite.com/warranty
123
A
BC
15-05-137-933443.indd 1 5/13/2015 12:30:33 PM

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
15-05-137 93-3443_RevB
To retract the Micro-USB connector:
1Place a thumbnail or fingernail on the
white button Aand push the Micro-USB
connector inward.
2When fully retracted, the white button Bwill
lock the Micro-USB connector into the USB
A connector.
1 2
AB
Using the 2-in-1 Connector
U050-07N-OTG
• The 2-in-1 Micro-B male
connector plugs into an OTG
compliant phone or tablet and
the standard Micro-B male
connector can plug into an
OTG compliant or non-OTG
compliant phone or tablet.
The phone or tablet using the
2-in-1 Micro-B connector will
act as the host device, allowing it to access the other
phone/tablet’s files, as well as provide power to that other device
• When using the 2-in-1 USB A male connector, the cable acts as a standard Micro-B to A cable.
Connecting the non-OTG Micro-B male connector to a device (OTG compliant or not) and
the USB A male connector into a computer’s USB port will allow the computer to access the
connected device’s files, enable syncing, and provide the phone or tablet with power.
U052-06N-OTG-AM
• 2-in-1 Micro-B male
connector plugs into
an OTG compliant
phone or tablet and
the USB A female
port can connect
to any peripheral
(keyboard, mouse,
etc.) for use with an
OTG device.
• When using the 2-in-1 USB A male connector, the cable
acts as a standard extension cable for a computer.
Connecting Devices
OTG Host Connector
OTG Host Connector
OTG Host Connector
OTG Host Connector
15-05-137-933443.indd 2 5/13/2015 12:30:34 PM