Tripp Lite B130-101-WP User manual

1
Owner’s Manual
VGA Over Cat5
Extender Wallplate Kit
Model: B130-101-WP
Español 7
Installation 5
Product Features 2-3
Specifications 3
Safety Information 2
Français 13
Warranty & Warranty Registration 6
Optional Accessories 3
Features 4
Package Contents 2
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
Note: Follow these instructions to ensure proper operation and prevent damage
to this device and its connected equipment.
Copyright © 2009 Tripp Lite. All rights reserved.
All trademarks are the property of their respective owners.
Warranty
Registration:
register online today for a
chance to win a FREE Tripp Lite
product—www.tripplite.com/warranty
200908075 93-2928.indb 1 9/22/2009 11:27:43 AM

2
• To reduce the risk of electric shock, do not expose the product to moisture.
• Operate this product using only the included external power supply. Use
of other power supplies could impair performance, damage the product, or
cause fire.
• Use only recommended accessories to avoid fire, shock or other hazards.
• Unplug this product before cleaning. Use a damp cloth for cleaning. Do
not use cleaning fluids or aerosols, which could enter the unit and cause
damage, fire or electrical shock.
• Do not attempt to service this unit. Instead, disconnect it and visit www.
tripplite.com/support.
• Use of this equipment in life support applications where failure of this
equipment can reasonably be expected to cause the failure of the life
support equipment or to significantly affect its safety or effectiveness
is not recommended. Do not use this equipment in the presence of a
flammable anesthetic mixture with air, oxygen or nitrous oxide.
• Extends a VGA* signal up to 500 ft. (150 m) using standard Cat5/5e/6
cable
• Provides a connection for optional local monitor
* Supports VGA, SVGA, XGA, UXGA and WUXGA monitors.
• Local Unit
• Remote Unit
• VGA Splitter Cable—HD15 Male to (2) HD15 Female
• 12.6V, 3A Power Supply
• (2) Wallplate Screw Sets
• 110 Punchdown Tool
• Screwdriver
• Owner’s Manual
Safety Information
Product Features
Package Contents
200908075 93-2928.indb 2 9/22/2009 11:27:43 AM

3
• P502-Series Monitor Cables with RGB Coax, HD15 Male/Male
• N020-01K-GY Cat5e Bulk Stranded Cable, 1000 ft.
• N022-01K-GY Cat5e Bulk Solid Cable, 1000 ft.
• N222-01K-GY Cat6 Bulk Solid Cable, 1000 ft.
Signal Type VGA, SVGA, XGA, UXGA and WUXGA
Video Amplifier Bandwidth 350 Mbps
Input DDC Signal 0.7 Volts p-p (TTL)
Local Unit Ports (1) HD15 Female,
(1) 110 Punchdown Female
Remote Unit Ports (1) HD15 Female,
(1) 110 Punchdown Female
Power Supply (1) 12.6V, 3A Power Supply
Dimensions (Local Unit) 2.75 in. (W) x 4.5 in. (H) x 1.1 in. (D)
Dimensions (Remote Unit) 2.75 in. (W) x 4.5 in. (H) x 1.1 in. (D)
Local Unit Weight 0.2 lb
Remote Unit Weight 0.2 lb
Note: Specifications are subject to change without notice. Mass and dimensions are
approximate; please take the actual products as the standard.
Product Features
Optional Accessories
Specifications
• Features built-in Equalization and Gain controls to adjust the video image
• Supports video resolutions up to 1920x1440
• No drivers required
200908075 93-2928.indb 3 9/22/2009 11:27:43 AM

4
1Source Video-In Port: HD15 Female Connector.
2Local Unit Power LED: This LED illuminates when the external power
supply is connected and the unit is receiving power.
3Local Unit Power Jack: The 12.6V, 3A external power supply plugs in
here.
4110 Punchdown Connector: Connect Cat5/5e/6 cable between the 110
Punchdown Connectors on the local and remote units.
5Remote Unit Power LED: This LED illuminates when the unit is con-
nected to the local unit and receiving power.
6Gain Adjustment: Adjusts brightness.
7EQ Adjustment: Adjusts equalization length.
8Remote Unit Video-Out Port: HD15 Female Connector.
Features
Local Unit (By Source) Remote Unit (By Display)
Rear
Power
Local
DC12.6V, 3A
Power
Gain
EQ
Remote
7
1 8
6
3
2 5
4
200908075 93-2928.indb 4 9/22/2009 11:27:44 AM

5
Note: You should test to make sure the entire installation works properly before pulling
cables through ceiling/walls.
1 Connect the Male end of the included VGA splitter cable to the HD15
port on the source computer.
2 Connect one of the Female connectors on the included VGA splitter
cable to the HD15 port on the local unit.
3 (Optional) Connect a local monitor to the remaining Female connector
on the included VGA splitter cable.
4 Connect the external power supply to the power jack on the local unit
and plug it into an appropriate power source.
5 Connect the 110 Punchdown Connector on the local unit to the 110
Punchdown Connector on the remote unit using Cat5/5e/6 cable.
6 Connect the HD15 port on the remote unit to a monitor.
7 Turn the display(s) on first.
8 Turn on the computer.
9 If the video on your monitor is either too dark or too light, use the Gain
Adjustment on the remote unit.
10 If the video on your monitor is fuzzy, or shows a ghosting effect, use the
EQ Adjustment on the remote unit.
Installation
1
2
3
4
56
200908075 93-2928.indb 5 9/22/2009 11:27:44 AM

6
1-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and workmanship for
a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this
warranty is limited to repairing or replacing (at its sole option) any such defective products. To
obtain service under this warranty, you must obtain a Returned Material Authorization (RMA)
number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned
to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid
and must be accompanied by a brief description of the problem encountered and proof of date and
place of purchase. This warranty does not apply to equipment which has been damaged by accident,
negligence or misapplication or has been altered or modied in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties;
therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR
DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE. Specically, TRIPP LITE is not liable for any costs, such as lost prots or revenue, loss
of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims
by third parties, or otherwise.
WARRANTY REGISTRATION
Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product.
You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
WEEE Compliance Information for Tripp Lite Customers and Recyclers
(European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing
regulations, when customers buy new electrical and electronic equipment from Tripp Lite they
are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on
the country)
• Send the new equipment back for recycling when this ultimately becomes waste
Tripp Lite follows a policy of continuous improvement. Product specications are subject to
change without notice.
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
Warranty & Warranty Registration
200908075 932928-EN
200908075 93-2928.indb 6 9/22/2009 11:27:44 AM