Tripp Lite NPOEI-60W-1G User manual

1
Industrial Gigabit Ethernet
PoE Injectors, PoE++, 802.3bt
Models: NPOEI-60W-1G, NPOEI-90W-1G
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2021 Tripp Lite. All rights reserved.
Quick Start Guide
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR®
surge protector in our monthly drawing!
tripplite.com/warranty
Este manual está disponible en español en la página de Tripp Lite:
tripplite.com/support
Ce manuel est disponible en français sur le site Web de Tripp Lite :
tripplite.com/support
Русскоязычная версия настоящего руководства представлена на
веб-сайте компании Tripp Lite по адресу: tripplite.com/support
Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website
verfügbar: tripplite.com/support
21-04-050 933E82-EN.indd 121-04-050 933E82-EN.indd 1 4/14/2021 6:26:32 PM4/14/2021 6:26:32 PM

2
Product Features
Package Contents
• Deliver power and data up to 328 ft. (100 m) through existing
cabling
• Extend power and data to any PoE or PoE+ device installed
where no AC outlet is available
• Support Gigabit Ethernet data transfer speeds up to 1000
Mbps (1 Gbps)
• Maximum output of 57V can compensate for voltage drop on
long cable runs
• PD detection function determines whether devices connected
to the system are compatible
• Compact, hand-sized metal housings ready for mounting on
any DIN rail
• Plug-and-play operation with no configuration required for easy,
immediate installation
• NPOEI-60W-1G or NPOEI-90W-1G PoE Injector
• DIN Rail Kit
• Quick Start Guide
21-04-050 933E82-EN.indd 221-04-050 933E82-EN.indd 2 4/14/2021 6:26:32 PM4/14/2021 6:26:32 PM

3
Applications
The PoE Injectors provide power up to 60W (NPOEI-60W-1G)
or 90W (NPOEI-90W-1G) to use power more efficiently on PoE
devices, including surveillance cameras, VoIP phones, outdoor
kiosks and smart PoE lights.
Notes:
• NPOEI-60W-1G is recommended for Wi-Fi applications that require
more than 30W of power.
• NPOEI-90W-1G is recommended for outdoor applications to supply
power to LED lights, 360° cameras and heater elements.
21-04-050 933E82-EN.indd 321-04-050 933E82-EN.indd 3 4/14/2021 6:26:32 PM4/14/2021 6:26:32 PM

4
Mounting and Dismounting
Instructions
Notes:
• These open-type devices shall be DIN-rail mounted or wall mounted
(optional) in a cabinet or enclosure where the ambient temperature
shall not exceed 75°C.
• Caution: Hot surface! Do not touch. Please wear protective equipment
before coming into contact.
• A corrosion-free mounting rail is advisable. When installing, allow
enough space between devices to properly install cabling and provide
room for proper airflow.
To mount, place the PoE injector on the DIN rail using the slot.
Push the front of the unit toward the mounting surface until it
snaps into place with a “click” sound.
To dismount, press the unit from the top, and pull out the lower
edge of it. Remove the unit from the DIN rail.
Mounting the Injector Removing the Injector
21-04-050 933E82-EN.indd 421-04-050 933E82-EN.indd 4 4/14/2021 6:26:32 PM4/14/2021 6:26:32 PM

5
Note: These PoE injectors are intended to be mounted to a well-
grounded mounting surface, such as a metal panel.
Grounding and wire routing help limit the effects of line noise
due to electromagnetic interferences (EMI). Run the ground
connection from the ground screw to the grounding surface
before connecting.
Note: Safety measures should be taken before connecting the power
cable. Please turn off the power before connecting any modules or wires.
The correct power supply voltage is listed on the product label. Check
the voltage of your power source to make sure you are using the correct
voltage. DO NOT use a voltage greater than what is specified on the
product label. If the current exceeds the maximum rating, the wiring can
overheat and cause serious damage to your equipment.
• Use separate paths to route wiring for power and devices.
If the power wiring and device wiring paths must cross, make
sure the wires are perpendicular at the intersection point.
Note: Do not run signal or communications wiring and power wiring
through the same wire conduit. To avoid interference, wires with
different signal characteristics should be routed separately.
• You can use the type of signal transmitted through a wire to
determine which wires should be kept separate. The rule of
thumb is that wiring that shares similar characteristics can be
bundled together.
• You should separate input wiring from output wiring.
• It is recommended that you label the wiring to all system devices.
Grounding the PoE Injector
Wiring Requirements
21-04-050 933E82-EN.indd 521-04-050 933E82-EN.indd 5 4/14/2021 6:26:32 PM4/14/2021 6:26:32 PM

6
Wiring Power Input
You can use “Terminal Block (PWR)” for Primary Power Input
and “Terminal Block (RPS)” for secondary power source for
Redundant Power Input.
Caution:
• Use copper conductors only
• Wiring cable temperature should support at least 105°C
• Tighten the wire to a torque value of 4.5 lb./in.
• Wire gauge for the terminal block should range between
14 AWG and 20 AWG
Wiring Requirements
21-04-050 933E82-EN.indd 621-04-050 933E82-EN.indd 6 4/14/2021 6:26:32 PM4/14/2021 6:26:32 PM

7
Connecting to Terminal Block
To insert power wire and connect the 24-57VDC at a maximum of 4A
DC power to the power terminal block, please follow the steps below:
1. Use a flat-head screwdriver to loosen the wire-clamp screws.
2. Insert the negative/positive DC wires into the PWR-/PWR+
terminals.
3. Tighten the wire-clamp screws to prevent the wires from
loosening.
Wiring Requirements
21-04-050 933E82-EN.indd 721-04-050 933E82-EN.indd 7 4/14/2021 6:26:32 PM4/14/2021 6:26:32 PM

8
Wiring the Relay Contact (ALM)
The NPOEI-60W-1G and NPOEI-90W-1G have one set of relay
alarm outputs. This relay contact uses two contacts of the
terminal block on the top panel of the unit. The two contacts
of the 6-pin terminal block connector are used to detect
user-configured events. The two wires attached to the fault
contacts form an open circuit when a user-configured event
occurs. If a user-configured event does not occur, the fault circuit
will remain closed. Therefore, in the event of a power loss by
main power or aux power or system overload, an external signal
can be detected.
See the chart below:
Wiring Requirements
for system overloading
21-04-050 933E82-EN.indd 821-04-050 933E82-EN.indd 8 4/14/2021 6:26:32 PM4/14/2021 6:26:32 PM

9
RJ45 Cabling
Connect one end of a user-supplied RJ45 cable to an Ethernet
port and the other end to the PoE Injector.
Note: Cat5e cable or above is recommended for best results.
DIP Switch Settings
Wiring Requirements
PWR ON Primary power alarm
reporting enabled
OFF Primary power alarm
reporting disabled
RPS ON Redundant power alarm
reporting enabled
OFF Redundant power alarm
reporting disabled
NBT ON Legacy mode enabled;
2-pair detection support
OFF 802.3bt Standard mode enabled;
4-pair detection support
RSV Reserved
21-04-050 933E82-EN.indd 921-04-050 933E82-EN.indd 9 4/14/2021 6:26:32 PM4/14/2021 6:26:32 PM

10
Specifications
General Specifications
Product Name NPOEI-60W-1G NPOEI-90W-1G
Product Type PoE Injector PoE Injector
Housing Metal Metal
Housing Rating IP-30 IP-30
Weight 0.85 lb. (385 g) 0.85 lb. (385 g)
Dimensions 1 x 4.6 x 4 in.
(2.5 x 11.6 x 10 cm)
0.9 x 4.3 x 2.9 in.
(2.4 x 10.9 x 7.4 cm)
Port 1 10/100/1000Base-T RJ45 10/100/1000Base-T RJ45
Port 2 10/100/1000Base-T 90W PoE++
Operating Temperature
Range
-40° to 75° C -40° to 75° C
Operating Humidity Range 5 to 95% RH, Non-Condensing 5 to 95% RH, Non-Condensing
Storage Temperature
Range
-40° to 85° C -40° to 85° C
Storage Humidity Range 5 to 95% RH, Non-Condensing 5 to 95% RH, Non-Condensing
MTBF Calculated @ 25℃ 645,827 hours 645,827 hours
MTBF Calculated @ 75℃ 81,636 hours 81,636 hours
LED Panel PWR, RPS, ALM, PoE, NBT,
63~66W PoE Usage
(15, 30, 60)
PWR, RPS, ALM, PoE, NBT,
93~96W PoE Usage
(15, 30, 60, 90)
Cooling Fan N/A N/A
DIP Switch Settings PWR, RPS, NBT, RSV PWR, RPS, NBT, RSV
Electrical Specifications
Max PoE Budget 60W 90W
Input Power Dual 24 ~ 57 VDC,
Terminal Block
Dual 24 ~ 57 VDC,
Terminal Block
Output Voltage 48 – 57 VDC 48 – 57 VDC
Max Current 600 ma/pair 960 ma/pair
Supported Modes Mode A, Mode B, 4-Pair Mode 4-Pair Mode Mandatory
Power Management 6 power class levels (1-6) 8 power class levels (1-8)
21-04-050 933E82-EN.indd 1021-04-050 933E82-EN.indd 10 4/14/2021 6:26:32 PM4/14/2021 6:26:32 PM
10/100/1000Base-T 60W PoE++