Tripp Lite N785-I01-SFP-DU User manual

1
Industrial Gigabit Copper to
FiberMedia Converter,
Unmanaged, RJ45/SFP
Model: N785-I01-SFP-DU
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2021 Tripp Lite. All rights reserved.
Quick Start Guide
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR®
surge protector in our monthly drawing!
tripplite.com/warranty
Este manual está disponible en español en la página de Tripp Lite:
tripplite.com
Ce manuel est disponible en français sur le site Web de Tripp Lite :
tripplite.com
21-09-033-933F8E-EN.indd 121-09-033-933F8E-EN.indd 1 9/7/2021 11:57:32 AM9/7/2021 11:57:32 AM

2
• Extends a Gigabit Ethernet connection to an open SFP port
with no software or additional configuration
• Industrial housing withstands a wide range of operating
temperatures from -40° to 75°C
• Provides ESD, RFI and surge protection
• IP30 rating guarantees protection from tools and wires
greater than 2.5 mm
• Open SFP port works with a variety of SFP transceivers
• Can be powered using the included terminal block or a
user-provided 12V DC power adapter
• Auto MDI/MDI-X functionality removes the need for
crossover cabling
Product Features
Package Contents
• N785-I01-SFP-DU Media Converter
• Terminal Block (20~57VDC)
• DIN Rail Kit
• RJ45 Cap
• SFP Cap
• Quick Start Guide
21-09-033-933F8E-EN.indd 221-09-033-933F8E-EN.indd 2 9/7/2021 11:57:32 AM9/7/2021 11:57:32 AM

3
Optional Accessories
• N001-Series Cat5e Snagless Ethernet Cables
• N201-Series Cat6 Snagless Ethernet Cables
• N286-Series Transceivers
21-09-033-933F8E-EN.indd 321-09-033-933F8E-EN.indd 3 9/7/2021 11:57:32 AM9/7/2021 11:57:32 AM

4
Installation
1. Optional: Connect the included DIN Rail Kit to the unit
using the included mounting hardware.
2. Connect the RJ45 port of an unmanaged copper Ethernet
switch to the RJ45 port of the first N785-I01-SFP-DU
media converter with a user-supplied Cat5e/6 cable.
3. Connect a transceiver to the first media converter’s open
SFP port.
4. Connect fiber cabling matching the transceiver type between
the transceiver’s port and a matching transceiver connected
to a second N785-I01-SFP-DU media converter.
Copper to Copper Installation
Notes:
• The following installation instructions refer to an installation in which
two media converters are used to increase the maximum distance
between two copper switches.
• To effectively communicate between media converters, the speeds of
the copper and fiber ports of each media converter should be identical.
The diagram and table below show the speed you should use between
media converters and switches, as well as which LED will illuminate
with respect to that speed.
N785-101-SFP-DU N785-101-SFP-DUEthernet copper switch 1
100/1000M/Auto 100/1000M/Auto
Ethernet copper switch 2
Copper Copper
Fiber
100/1000M
21-09-033-933F8E-EN.indd 421-09-033-933F8E-EN.indd 4 9/7/2021 11:57:32 AM9/7/2021 11:57:32 AM

5
Installation
5. Connect the RJ45 port of a second unmanaged copper
Ethernet switch to the RJ45 port of the second
N785-I01-SFP-DU media converter with a user-supplied
Cat5e/6 cable.
6. Connect the 12~57VDC terminal block or optional
12V DC power supply to the media converters, and plug
them into an available wall outlet, Uninterruptible Power
Supply (UPS) or Power Distribution Unit (PDU).
7. When all connections have been made, check the
“L/A (Link/Activity)” LED to confirm the connection has
been established.
Item Copper Switch
#1 Setting
SFP
Type
Copper Switch #2
Setting
LED
Displayed
1 Auto
(100/1000 Mbps)
GbE Auto
(100/1000 Mbps)
1000
2 Auto
(100/1000 Mbps)
FX Auto
(100/1000 Mbps)
100
3 Auto
(100 Mbps)
FX Auto
(100 Mbps)
100
4 1G
(Force)
GbE 1G
(Force)
1000
5 100F
(Force)
FX 100F
(Force)
100
6 100H
(Force)
FX 100H
(Force)
100
21-09-033-933F8E-EN.indd 521-09-033-933F8E-EN.indd 5 9/7/2021 11:57:33 AM9/7/2021 11:57:33 AM

6
Installation
Copper to Fiber Installation
Notes:
• The following installation instructions refer to an installation in which
one media converter is used to increase the maximum distance
between a copper switch and a fiber switch.
• To effectively communicate between media converters, the speeds of
the copper and fiber ports of each media converter should be identical.
The diagram and table below show the speed you should use between
media converters and switches, as well as which LED will illuminate
with respect to that speed. The diagram also shows how one media
converter can be used to increase the distance between a copper
switch and a fiber switch.
1. Optional: Connect the included DIN Rail Kit to the unit using
the included mounting hardware.
2. Connect the RJ45 port of an unmanaged copper Ethernet
switch to the RJ45 port of the N785-I01-SFP-DU media
converter with a user-supplied Cat5e/6 cable.
3. Connect a transceiver to the media converter’s open SFP port.
4. Connect fiber cabling matching the transceiver and switch
type between the transceiver’s port and an unmanaged fiber
Ethernet switch.
N785-101-SFP-DU
100/1000M/Auto
Ethernet FIBER switch
Copper Fiber
100/1000M
Ethernet copper switch/
IP-CAM
21-09-033-933F8E-EN.indd 621-09-033-933F8E-EN.indd 6 9/7/2021 11:57:33 AM9/7/2021 11:57:33 AM

7
Installation
5. Connect the 12~57VDC terminal block or optional 12V DC
power supply to the media converter, and plug it into an
available wall outlet, Uninterruptible Power Supply (UPS) or
Power Distribution Unit (PDU).
6. When all connections have been made, check the “L/A (Link/
Activity)” LED to confirm the connection has been established.
Item Copper Switch
#1 Setting
SFP
Type
Fiber Switch
Setting
LED
Displayed
1 Auto (100/1000 Mbps) GbE GbE 1000
2 Auto (100/1000 Mbps) FX FX 100
3 Auto (100 Mbps) FX FX 100
21-09-033-933F8E-EN.indd 721-09-033-933F8E-EN.indd 7 9/7/2021 11:57:33 AM9/7/2021 11:57:33 AM

8
Specifications
Specification N785-I01-SFP-DU
Optical Wavelength N/A (Open SFP, depends on transceiver)
Network Speed 100/1000 Mbps (Gigabit)
Mode N/A (Open SFP, depends on transceiver)
Transmission Distance N/A (Open SFP, depends on transceiver)
Duplex Mode Auto MDI/MDI-X
IEEE Standards Supported 802.3u 100Base-TX/FX
802.3ab 1000Base-T
802.3z 1000Base-SX/LX
Power Consumption 6W
Power Supply Input 12~57VDC (Terminal Block) or
12V DC (DC Power Supply)
Operating Temperature -40° to 167°F (-40° to 75°C)
Storage Temperature -40° to 185°F (-40° to 85°C)
Relative Humidity 5% to 95% RH, Non-Condensing
Unit Dimensions (H x W x D) 2 x 1.7 x 2.4 in. / 5 x 4.25 x 6.1 cm
21-09-033-933F8E-EN.indd 821-09-033-933F8E-EN.indd 8 9/7/2021 11:57:33 AM9/7/2021 11:57:33 AM

9
Safety Instructions
LED Status Table
LED Status Description
PWR (Green)
On Power is on
Off Power is off or experiencing failure
L/A
(Link/Activity, Green)
On Ethernet (RJ45) link is up
Blinking Activity (transmitting/receiving data)
Off Port disconnected or link failed
100 (Green)
On Both RJ45 and SFP link speed set
at 100 Mbps
Off Either RJ45 or SFP is not linked
correctly at 100 Mbps speed
1000 (Green)
On Both RJ45 and SFP link speed set
at 1000 Mbps
Off Either RJ45 or SFP is not linked
correctly at 1000 Mbps speed
Ensure the correct power voltage is being used before operating
this product. The correct power supply voltage is listed on
the product label. Check the voltage of your power source to
make sure that you are using the correct voltage. Do not use
a voltage greater than what is specified on the product label.
Failing to adhere to the maximum allowable voltage can lead
to overheating wiring, which can cause serious damage to your
equipment or fire hazards.
21-09-033-933F8E-EN.indd 921-09-033-933F8E-EN.indd 9 9/7/2021 11:57:33 AM9/7/2021 11:57:33 AM

10
Warranty and Product Registration
2-Year Limited Warranty
Seller warrants this product, if used in accordance with all applicable instructions,
to be free from original defects in material and workmanship for a period of two
(2) years from the date of initial purchase. If the product should prove defective
in material or workmanship within that period, Seller will repair or replace the
product, at its sole discretion.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE
RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER
MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY
EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED
BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL
WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN
DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND
THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND
CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how
long an implied warranty lasts, and some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitations or
exclusions may not apply to you. This warranty gives you specic legal rights,
and you may have other rights which vary from jurisdiction to jurisdiction.)
WARNING: The individual user should take care to determine prior to use
whether this device is suitable, adequate or safe for the use intended. Since
individual applications are subject to great variation, the manufacturer makes no
representation or warranty as to the suitability or tness of these devices for any
specic application.
Product Registration
Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll
be automatically entered into a drawing for a chance to win a FREE Tripp Lite
product!*
*No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
21-09-033-933F8E-EN.indd 1021-09-033-933F8E-EN.indd 10 9/7/2021 11:57:33 AM9/7/2021 11:57:33 AM

11
Warranty and Product Registration
WEEE Compliance Information for Tripp Lite Customers
and Recyclers (European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive
and implementing regulations, when customers buy new electrical and
electronic equipment from Tripp Lite, they are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis
(this varies depending on the country)
• Send the new equipment back for recycling when this ultimately
becomes waste
Use of this equipment in life support applications where failure of this equipment
can reasonably be expected to cause the failure of the life support equipment or
to signicantly a󰀨ect its safety or e󰀨ectiveness is not recommended.
Tripp Lite has a policy of continuous improvement. Specications are subject to
change without notice. Photos and illustrations may di󰀨er slightly from actual products.
21-09-033-933F8E-EN.indd 1121-09-033-933F8E-EN.indd 11 9/7/2021 11:57:33 AM9/7/2021 11:57:33 AM

12
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
21-07-115 • 93-3F8E_RevA
21-09-033-933F8E-EN.indd 1221-09-033-933F8E-EN.indd 12 9/7/2021 11:57:33 AM9/7/2021 11:57:33 AM