Tripp Lite N785-001-SC User manual

1
Owner’s
Manual
Warranty
Registration:
register online today for a
chance to win a FREE Tripp Lite
product—www.tripplite.com/warranty
10/100/1000BaseT to
1000BaseFX SC
Media Converter
Model: N785-001-SC
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
200912005 93-2950.indd 1 12/28/2009 1:38:03 PM

2
Optional Accessories
• N201-Series Cat6 Gigabit Snagless Molded Patch
Cable
• N506-Series Duplex MMF 50/125 Patch Cable (SC/SC)
• N306-Series Duplex MMF 62.5/125 Patch Cable
(SC/SC)
Package Contents
• N785-001-SC
• External Power Supply (Input: 110-265V, 50/60Hz,
0.2A/Output: 5V, 2A)
• Owner’s Manual
200912005 93-2950.indd 2 12/28/2009 1:38:03 PM

3
Front Panel
Rear Panel
1Patch Cable Ports: The SC Fiber Patch Cable
(50/125 or 62.5/125) connects between these ports
and the corresponding ports on another
N785-001-SC.
2 Status LEDs: Provide information about the status
of the installation. (See the LED Status Table for
details.)
3Cat6 Cable Port: The Cat6 cable connects between
this port and the network or network device.
1External Power Supply Jack: The external power
supply connects to the unit here.
1
1
2 3
200912005 93-2950.indd 3 12/28/2009 1:38:03 PM

4
Installation
Network
Power Source
50/125 or 62.5/125
SC Fiber Patch Cable
Power Source
Network Device
1 3
2
4 4
1Connect the RJ45 port on the unit to the network
using a Cat6 cable.
2Connect the SC ber ports on the unit to another
N785-001-SC using 50/125 or 62.5/125 SC ber
patch cable.
3Connect a network device (workstation, hub, switch,
etc.) to the second unit using Cat6 cable.
4Connect the external power supplies to each unit and
plug them into an appropriate power source.
200912005 93-2950.indd 4 12/28/2009 1:38:03 PM

5
LED Status Table
LED Indicator LED Status Description
Power LED
(top left LED)
Illuminated Unit is receiving power.
Not illuminated Unit is not receiving
power.
Fiber Port Link/
Action LED
(middle left LED)
Illuminated A ber link is detected.
Blinking Data is being transmitted
or received.
Not illuminated No ber link is detected.
Fiber Port
Signal Detection
(bottom left LED)
Illuminated Laser is being received.
Not illuminated Laser is not being
received.
UTP Port
Speed LED
(top right LED)
Illuminated UTP transfer rate is
1000Mbps.
Not illuminated UTP transfer rate is
100Mbps or lower
UTP Port Link/
Action LED
(middle right
LED)
Illuminated UTP link is detected.
Blinking Data is being transmitted
or received.
Not illuminated UTP link is not detected.
UTP Port Duplex
LED (bottom
right LED)
Illuminated Full duplex.
Not illuminated Half duplex.
200912005 93-2950.indd 5 12/28/2009 1:38:04 PM

6
Specifications
Optical Wavelength (nm) 1310
Optical Power (dbm) -17 ~ -12
Sensitivity (dbm) < -20
Transmission Distance
(Km)
2
External Power Supply
(Input)
110-265V, 50/60Hz, 0.2A
External Power Supply
(Output)
5V, 2A
Operating Temperature 0° to 60° C (32° to 140° F)
Relative Humidity 5% to 90%
200912005 93-2950.indd 6 12/28/2009 1:38:04 PM

7
Warranty
1-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in
materials and workmanship for a period of one (1) year from
the date of initial purchase. TRIPP LITE’s obligation under this
warranty is limited to repairing or replacing (at its sole option) any
such defective products. To obtain service under this warranty, you
must obtain a Returned Material Authorization (RMA) number
from TRIPP LITE or an authorized TRIPP LITE service center.
Products must be returned to TRIPP LITE or an authorized
TRIPP LITE service center with transportation charges prepaid
and must be accompanied by a brief description of the problem
encountered and proof of date and place of purchase. This warranty
does not apply to equipment which has been damaged by accident,
negligence or misapplication or has been altered or modied in
any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES
NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE. Some states do not permit limitation
or exclusion of implied warranties; therefore, the aforesaid
limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL
TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE. Specically,
TRIPP LITE is not liable for any costs, such as lost prots or
revenue, loss of equipment, loss of use of equipment, loss of
software, loss of data, costs of substitutes, claims by third parties,
or otherwise.
200912005 93-2950.indd 7 12/28/2009 1:38:04 PM

8
WARRANTY REGISTRATION
Visit www.tripplite.com/warranty today to register the warranty for
your new Tripp Lite product. You’ll be automatically entered into a
drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See
web site for details.
Warning!
Use of this equipment in life support applications where failure
of this equipment can reasonably be expected to cause the failure
of the life support equipment or to signicantly affect its safety or
effectiveness is not recommended. Do not use this equipment in
the presence of a ammable anesthetic mixture with air, oxygen
or nitrous oxide.
WEEE Compliance Information for Tripp Lite Customers and
Recyclers (European Union)
Under the Waste Electrical and Electronic Equipment (WEEE)
Directive and implementing regulations, when customers buy
new electrical and electronic equipment from Tripp Lite they are
entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like
basis (this varies depending on the country)
• Send the new equipment back for recycling when this ultimately
becomes waste
Tripp Lite follows a policy of continuous improvement.
Product specications are subject to change without notice.
Warranty continued
200912005 • 93-2950
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
200912005 93-2950.indd 8 12/28/2009 1:38:04 PM