LIFETIME
LIMITED
WARRANTY.
Seller warrants
this
product,
if
used
in accordancewith all applicable
instructions,
tobe
free
fromoriginaldefects
in
materialandworkmanship
for
its
lifetime.
If
the product should prove defective in material or
workmanship
within
thatperiod,Seller
will
repairorreplacetheproduct,
initssolediscretion.
Service
under
this
Warranty,
can
only
beobtainedby
your delivering or shipping the product (with
all
shippingor delivery
chargesprepaid)to: Tripp
Lite,
418
W.
Illinois,Chicago,
IL
60610. Seller
will
pay
return
shippingcharges.
Call
TrippLiteat(312)755-5401before
sendinganyequipmentback forrepair.
THIS
WARRANTY
DOES
NOT APPLY TO NORMAL
WEAR
OR TO
DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR
NEGLECI:
SELLER
MAKES
NO EXPRESS WARRANTIES OTHER
THAN
THE
WARRANTY
EXPRESSLY SET
FORT^
HEREIN.
EXCEPT
TO
THE
EXTENT
PROHIBITED
BY
APPLICABLELAW, ALL IMPLIED
WARRANTIES, INCLUDING ALL WARRANTIES
OF
MERCHANTABILITY
OR
FlTNJ3S,ARE
LIMlTED
IN
DURATIONTO
THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS
WARRANTY
EXPRESSLY EXCLUDES ALL INCIDENTAL AND
CONSEQUENTIALDAMAGES. (Somestates
donotallowlimitationson
how long an implied warranty lasts, and some states donot allow the
exclusion or limitation of incidental or consequential damages, so the
above limitations or exclusions may not apply to you.
This
Warranty
givesyouspecificlegalrights, andyoumayhaveotherrights
whichvary
fromjurisdictiontojurisdiction).
TrippLite
500
N.
Orleans
Chicago, IL
60610
WARNING:
Theindividualusershould
take
care
to
determine
prior to
use
whether
this
device
is
suitable,adequateor
safe
fortheuseintended.
Since individual applications are subject to great variation, the
manufacturer
makes
norepresentationorwa- tothesuitabilityor
fitnessof thesedevicesforanyspecificapplication.
policy
of ~ri~~~ite
is
oneof continuousimprovement. Specificationsare
subjectto changewithoutnotice.
3
@
Printed
on
recycled
paper
0295
-
Datashield
TR1pp&!E
7wEaJwm
~ata
&
~ommunicatlon~ine
Surge Suppressors
DataShielddata/communicationlinesurgesuppressors
are
designedtoprotect
dataandcommunicationsequipmentagainstAC transientscausedbylightning,
electrostaticdischargeand ground
surges
that enter equipment fromthe signal
lines
orchassisground.
DataShield surge suppressors described here protect virtually any
networkedequipmentusing
10
baseT, 10base-2 and 10base5Ethernet,Token
Ring,
RS232,
RS422/423/485,
dial-up modems, fax, T-1 lines and most other
communicationinterfaces.
Installation
To install theDataShield surgesuppressor,follow thesesteps:
1.
Makesurethecomputer,networkdeviceorotherequipmentislogged
OFF
the
network(if applicable).
Turn
OFFpower to the equipment.
2.
Disconnect
thecablefrom the equipmenttobeprotected.
!
3.
ConnecttheDataShield surgesuppressordirectlyto the equipment.
4.
Attachthegreenground
wire
onthesurgesuppressordirectlytotheprotected
equipment'schassis: (Datashieldsurgesuppressors
with
"D
styleconnectorsdo
notprovideorrequire
this
externalgrounding).
5.
Reconnect thecable to the DataShieldsurgesuppressor.
NOTE!
The DataShield surgesuppressormust
be
properly
grounded
and
positioned
as
doseas
possibleto the equipment to
be
protected. For bestresults,it
is
required that the lengthof
the signal
line
and
ground
wire
(if
equipped)
between
the surge suppressor
and
the
protectedequipment
be
kept
as
short
as
possible,not
to
exceed
12
inches
(12").
It
is
best
to
install
the surgesuppressor
directly
to
the equipment,
as
noted above.
NOTE!
AsingleDataShieldsurgesuppressorisequivalenttoapproximately
three
feet(3')
of typicaldata communidtion cable.
ACAUTIONI
When properly
installed,
the DataShield surgesuppressor will protect against
surges
on
the dataline portion of your installation. Additional
AC
surge suppression/power
protectionintheformof anISOBARmsurgesuppressor
or
Tripp
Lite
UPSsystemisstrongly
recommended for complete system/network protection. Contact Tripp
Lite
Customer
Service
at
(312)
755-5401
formore information.