Tripp Lite DWM2355S User manual

1
Owner’s Manual
Full-Motion Flat-Screen
Wall Mount
Model: DWM2355S
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2020 Tripp Lite. All rights reserved.
WARNING! Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
75x75/100x100
200x100/200x200
300x300/400x200
400x300/400x400
55"
MAX 11-50.6 lbs11-50.6 lbs
(5-23 kg)(5-23 kg)
RatedRated
Este manual esta disponible en español en la página de Tripp Lite: tripplite.com
Ce manuel est disponible en français sur le site Web de Tripp Lite : tripplite.com
Русскоязычная версия настоящего руководства представлена на веб-сайте компании
Tripp Lite по адресу: tripplite.com
Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website verfügbar: tripplite.com
WARRANTY REGISTRATION
Register your product today and be automatically entered to win an ISOBAR®surge protector in our monthly drawing!
tripplite.com/warranty

2
Parts List
Important Safety Instructions
CAUTION
• Read the entire instruction manual before you start assembly and installation. If you have questions about any of
the instructions or warnings, contact Tripp Lite Support.
• Use with products heavier than the rated weights indicated may result in instability, causing possible injury.
• Mounts must be attached as specified in these instructions. Improper installation may result in damage or serious
personal injury.
• Safety gear and proper tools must be used. This product should only be installed by professionals.
• This product is designed to be installed on wood stud walls, solid concrete walls or brick walls.
• Ensure the supporting surface will safely support the combined weight of the equipment and all attached hardware
and components.
• Use the mounting screws provided and DO NOT OVERTIGHTEN the mounting screws.
• This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and
personal injury.
• Check that the bracket is secure and safe to use at regular intervals (at least every three months)
IMPORTANT: Before beginning installation, be sure you have received all the parts listed below.
If any parts are missing or faulty, contact Tripp Lite for replacements.
A
Wall Plate/
Articulating Arm (x1)
Components
B
VESA Plate (x1)
C
VESA Adapter
Bracket (x4)
D
Wall Plate
End Cap (x1)
E
Wall Plate
End Cap (x1)
F
Nut
(x4)
G
Bolt
(x4)
H
Wrench
(x1)
I
4 mm Hex
Key (x1)
J
6 mm Hex
Key (x1)

3
Parts List
Stud finder
(for installation
on wood stud wall)
Pencil Level Drill with
appropriate bits
(for installation type)
Screwdriver
W-B
Concrete Anchor (x3)
W-A
Anchor Bolt (x3)
W-C
Washer (x3)
Package M
Package W
M-A
M5x14 (x4)
M-E
M8x50 (x4)
M-B
M6x14 (x4)
M-F
D6 Washer (x4)
M-C
M6x30 (x4)
M-H
Smaller Spacer (x8)
M-D
M8x30 (x4)
M-I
Large Spacer (x8)
M-G
D8 Washer (x4)
Required for Installation

4
1a. Mount on Wood Stud Wall
1
2
3
Find and mark the
exact location of
mounting holes
Screw mount
into wall
Drill pilot holes
WARNING
• Make sure the mounting screws are anchored into the center of the studs. Use of a stud finder is highly
recommended.
• The installer is responsible to provide hardware for other types of mounting situations.
• The installer must verify the supporting surface will safely support the combined load of the equipment
and all attached hardware and components.
Ensure holes are level
60mm
2.4”()
55mm
(2.2")
Ø4.5mm
(Ø3/16")
1a
1a

5
WARNING
• When installing wall mount onto a concrete masonry unit (also known as a CMU or cinder block), verify
the actual concrete thickness is at least 1-3/8” (35 mm) in order to hold the concrete anchors. DO NOT
DRILL INTO MORTAR JOINTS! Be sure to mount the assembled wall-mount plate with the included concrete
anchors, D6 washers and anchor bolts onto solid sections of the blocks. The solid sections can generally
be found 1” (25 mm) toward the middle of the block from either end. An electric drill on a slow setting is
recommended to drill the hole rather than a hammer drill to avoid breaking out the back of the hole when
entering a hollow section.
• The installer must verify the supporting surface will safely support the combined load of the equipment and
all attached hardware and components.
1b. Mount on Solid Brick or Concrete Block
1
2
Find and mark the
exact location of
mounting holes
Screw mount
into wall
Drill pilot holes
Ensure holes are level
Ensure holes are level
65mm
2.6"()
60mm
(2.4")
Ø10mm
(Ø3/8")
1
1b
1b

6
2. Install Articulating Arm
3. Prepare VESA Plate
2
3

7
4. Attach VESA Adapter Brackets
4

8
5. Mount Brackets to Display
TV TV
TV
TV TV
TV
Note: Choose appropriate screws, washers and spacers (if necessary) according to the type of screen.
• Position the adapter brackets as close as possible to the center of the display.
• Firmly secure the adapter brackets onto the display using the screws and any other necessary hardware components included with the unit.
DO NOT OVERTIGHTEN SCREWS!
5a
5b
5a
5b

9
6. Hang Flat Screen onto Articulating Arm
7. Level and Tighten Screen
7

10
8. Adjust Articulating Arm
8