Tripp Lite SmartOnline SU3000RTXL3UHV User manual

Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +[phone]
E-mail: [email protected]
Model #: SU3000RTXL3UHV
SmartOnline 3kVA On-Line Double-Conversion UPS, 3U Rack/Tower, 208/240V NEMA outlets
Highlights
3000VA / 3kVA / 2400 watt on-line double-conversion 3U rack/tower UPS
208/240V +/-2% output at 50/60Hz
Expandable runtime, Hot-swappable battery modules
RS232 port; support for SNMP/WEB card options
Front panel status LEDs with detailed load and battery metering
NEMA L6-20P input; 6-15/20R & L6-20R outlets
Description
3000VA / 3kVA on-line, double-conversion UPS system for critical server, network and telecommunications equipment. 3U rackmount form factor
with an installed depth of 20 inches (50.8cm). Expandable battery runtime with optional BP72V15-2U (limit 1) and BP72V28RT3U (multi-pack
compatible) external battery packs. Full time sine wave 200/208/220/230/240V AC output with +/-2% voltage regulation. Online, double-conversion
Uninterruptible Power Supply (UPS) actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered
AC output. Operates continuously without using battery power during brownouts to 130V and overvoltages to 275V. NEMA L6-20P input plug.
NEMA 6-15/20R & L6-20R output receptacles. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery
operation. Network management interfaces support simultaneous communications via DB9 serial port and SNMPWEBCARD slot. Built-in DB9 port
offers both enhanced RS-232 enabled monitoring data, plus contact closure monitoring ability. Supports simultaneous detailed monitoring of
equipment load levels, self-test data and mains power conditions via all network interfaces. Includes PowerAlert monitoring software and complete
cabling. Integrated two bank PDU switching supports load shedding and remote-reboot of connected equipment. Multi-stage metered current
monitoring and battery charge status LEDs. Mains power and voltage regulation LEDs. Audible Alarm. Self-test. Fault-tolerant auto-bypass mode. 4
post rackmount accessories included; 2-9USTAND tower kit and 2POSTRMKITWM 2-post rackmount accessories available. Field replaceable, hot
swappable internal batteries and external battery packs. Attractive all-black UPS design. $250,000 connected equipment insurance
Package Includes
SU3000RTXL3UHV Rack-Tower UPS System
PowerAlert Software and cabling
Mounting hardware for 4 post rackmount enclosures/tower stands included
Warranty information
Instruction manual
Features
True on-line, double conversion UPS provides pure, sine wave AC output at all times
Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time
Removes harmonic distortion, electrical impulses, frequency variations and other hard to solve power problems
Accepts input voltages between 160 and 275 (130 to 275 at loads under 70%), regulating output to selectable 200/208/220/230/240V +/-2%
3000VA/2400 watt power capacity with 8 total outlets (6 NEMA6-15/20R & 2 NEMAL6-20R)
Standard internal battery set provides 14 minutes runtime at half load
Expandable runtime with multiple external battery packs (part# BP72V15-2U limit 1/BP72V28-3U multi-pack compatible)
Innovative design makes unit adaptable for rackmount, tower, or stacking applications
Uses only 3 rack spaces (3U) in standard 19 inch rack
DB9 serial port for network interface; SNMP compatible
Slot for optional SNMP/web card (part# SNMPWEBCARD)
PowerAlert unattended shutdown software and 6 ft. network cable included
Compatible with Tripp Lite's Watchdog Service Monitoring/Reboot Software

Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions
Diagnostic LEDs
Battery replacement door
Mounting hardware included for 4 post rack enclosures, 2 post telecom rack compatible with separate purchase 2POSTRMKITWM
accessory
$250,000 Ultimate Lifetime connected equipment insurance
Specifications
OUTPUT
Output Volt Amp
Capacity (VA)
3000
Output kVA capacity
(kVA)
3
Output Watt Capacity
(watts)
2400
Output kW capacity 2.4
Output power factor 0.8
Crest Factor 3:1
Nominal Output
Voltage(s) Supported
200V; 208V; 220V; 240V
Nominal Voltage
details
230V default
Frequency
compatibility
50 / 60 Hz
Frequency
compatibility details
Output frequency matches input nominal on startup, defaults to 60 Hz on cold-start
Output voltage
regulation (line mode)
+/- 2%
Output voltage
regulation (Battery
mode)
+/- 2%
Built-in UPS output
receptacles
6 6-15/20R outlet(s); 2 L6-20R outlet(s)
Built-in controllable
switched load banks
Two switchable 6-15/20R load banks (bank 1 - two outlets, bank 2 - four outlets)
Output AC waveform
(AC mode)
Sine wave
Output AC waveform
(battery mode)
Pure Sine wave
INPUT
Rated input current
(at maximum load)
14.9A (200V), 14.3A (208V), 13.1A (220V), 12.1A (240V)
Nominal Input
Voltage(s) Supported
200V AC; 208V AC; 220V AC; 240V AC
UPS input connection
type
L6-20P
Input circuit breaker 25A double pole

UPS Input cord length
(ft.)
10
UPS Input cord length
(m)
3
Recommended
Electrical Service
20A
BATTERY
Full load runtime
(minutes)
5 min. (2400w)
Half load runtime
(minutes)
14 min. (1200w)
Expandable battery
runtime
Supports extended runtime with optional external battery packs
External battery pack
compatibility
BP72V15-2U (limit 1); BP72V28RT-3U (multi-pack compatible)
DC system voltage
(VDC)
72
Battery recharge rate
(included batteries)
Less than 6 hours from 10% to 80%
Replacement battery
cartridge (internal
UPS battery
replacement)
RBC53 (quantity 2)
Battery Access Front panel battery access door
Battery replacement
description
Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation
description
Online, double-conversion power conditioning
Overvoltage
correction
Maintains output during overvoltages to 275
Undervoltage
correction
Maintains output during undervoltages to 160V AC
Severe undervoltage
correction
At load levels less than 70%, UPS maintains output during undervoltages to 130V AC
LEDS ALARMS & SWITCHES
LED Indicators 14 LEDs indicate line power, online mode, bypass mode, on-battery, overload, battery low, replace battery and fault
status information; 4-LED meter displays load and battery charge levels; LED panel rotates for viewing in
rack/tower formats
Alarms Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown
conditions
Alarm cancel
operation
Power-fail alarm can be silenced using alarm-cancel switch
Switches 2 switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression
joule rating
2670

UPS AC suppression
response time
Instantaneous
EMI / RFI AC noise
suppression
Yes
PHYSICAL
Installation form
factors supported
with included
accessories
4 post 19 inch rackmount (mounting rail kit included)
Installation form
factors supported
with optional
accessories
2 post rackmount (2POSTRMKITWM); Tower (2-9USTAND)
Optional mounting
accessory notes
Wallmount installation not recommended
Primary form factor Rackmount
UPS / Power Module
dimensions in
primary form factor
(height x width x
depth / inches)
5.2 x 17.3 x 19.8
UPS / Power Module
dimensions in
primary form factor
(height x width x
depth / cm)
13.2 x 43.9 x 50.3
Installed whole
system total rack
space height (rack
spaces)
3U
Secondary form factor Tower (requires 2-9USTAND)
UPS / Power Module
weight (lbs)
74.9
UPS / Power Module
weight (kg)
34
UPS Shipping
dimensions (height x
width x depth / inches)
13.3 x 23.8 x 25.7
UPS Shipping
dimensions (height x
width x depth / cm)
33.8 x 60.5 x 65.3
Shipping weight (lbs) 90.3
Shipping weight (kg) 41
UPS housing material Steel
Cooling method Fan
ENVIRONMENTAL
Operating
Temperature Range
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature
Range
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Relative Humidity 0 to 95%, non-condensing
AC mode BTU / hr.
(full load)
1112.7
Battery mode BTU /
hr. (full load)
1219.3
COMMUNICATIONS
Communications
interface
DB9 Serial; Contact closure; Slot for SNMP/Web interface
Network monitoring
port description
Supports detailed monitoring of UPS and site power conditions; DB9 port supports RS232 and contact closure
communications
Communications
cable
DB9 cable included
WatchDog
compatibility
Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer time No transfer time (0 ms.) in online, double-conversion mode
Low voltage transfer
to battery power
(setpoint)
160V (100% load), 130V (
High voltage transfer
to battery power
(setpoint)
275
SPECIAL FEATURES
Cold Start (startup in
battery mode during a
power failure)
Cold-start operation supported
High availability UPS
features
Automatic inverter bypass; Hot swappable batteries
Green & high
efficiency features
Individually controllable load banks
CERTIFICATIONS
UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)
WARRANTY
Product Warranty
Period (Worldwide)
2-year limited warranty
Connected
Equipment Insurance
(U.S., Canada &
Puerto Rico)
$250,000 Ultimate Lifetime Insurance
Related Items
Optional Products
Product Type Related Model Description Qty.
Environmental Monitoring 730909 Power Management Tools - EPO Y Adapter Cable 1
Extended Warranties WEXT3-2200-3000 3-Year Extended Warranty - For Smart Line-Interactive and Online
Tower or Rack models, 2200-3000VA
1

Extended Warranties WEXT5-2200-3000 5-Year Extended Warranty - For Smart Line-Interactive and Online
Tower or Rack models, 2200-3000VA or less
1
External Battery Packs BP72V15-2U BP72V15-2U - External Battery Pack for UPS System 1
External Battery Packs BP72V28RT-3U BP72V28RT-3U - External Battery Pack for UPS System 1
Power Distribution PDU12IEC Basic PDU / Power Distribution Unit - Safe, reliable power distribution
for critical networking equipment
1
Rackmount Consoles 2POSTRMKITHD Enables 2-Post Rackmount Installation of 3U and Larger UPS,
Transformer and Battery Pack Components
1
Shutdown Cable Kits AS400CABLE KIT Power Management Tools - UPS Communication Cable Kit for System
i / AS400 / iSeries Servers
1
SNMP Accessories ENVIROSENSE Monitors temperature, humidity and contact-closure inputs. (Requires
SNMPWEBCARD or switched PDU.)
1
SNMP Accessories SNMPWEBCARD For remote monitoring and control via SNMP, Web, or Telnet. 1
Surge Protectors DCATV Network Surge Suppressor - Essential protection for TV/VCR coaxial
lines
1
Surge Protectors DNET1 Network Surge Suppressor - Essential protection for data and
communication lines
1
Surge Protectors DTEL2 Network Surge Suppressor - Essential protection for data and
communication lines
1
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=2568.
Copyright © 2012 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.