Tristar Products Hot Point Brush User manual

Owner’s Manual
& Style Guide
WARRANTY INFORMATION INSIDE

2
READ ALL INSTRUCTIONS, WARNINGS, AND PRECAUTIONS COMPLETELY AND CAREFULLY BEFORE USE.
Save these instructions in an easily accessible place for future use.
When using electrical appliances, especially when children are present, always follow basic safety precautions,
including the following:
KEEP AWAY FROM WATER
DANGER – As with most electrical appliances, electrical parts are electrically live
even when the switch is in the “OFF” position.
TO REDUCE THE RISK OF SERIOUS INJURY BY ELECTRIC SHOCK:
• ALWAYS UNPLUG THE APPLIANCE IMMEDIATELY AFTER USING.
• NEVER USE WHILE BATHING.
• DO NOT PLACE OR STORE THE APPLIANCE NEAR WATER WHERE IT CAN FALL OR BE PULLED INTO A BATH OR SINK.
• DO NOT PLACE OR DROP THE APPLIANCE INTO WATER OR ANY OTHER LIQUID.
• IF THE APPLIANCE FALLS INTO WATER UNPLUG IT IMMEDIATELY. DO NOT REACH INTO THE WATER.
WARNING
To reduce the risk of burns, electrocution, fire, or injury to persons:
1. DO NOT USE THIS APPLIANCE IF IT HAS A DAMAGED/LOOSE CORD OR PLUG, IF IT IS NOT WORKING PROPERLY,
IF IT HAS BEEN DROPPED OR DAMAGED, OR DROPPED INTO WATER. RETURN THE APPLIANCE TO A SERVICE
CENTER FOR EXAMINATION AND REPAIR.
2. DO NOT USE IF MORE THAN SEVERAL ADJOINING NYLON BRISTLES ARE MISSING FROM A ROW.
3. DO NOT USE A VOLTAGE CONVERTER.
4. AVOID MORE THAN ONE CABLE TO A PLUG OR THE USE OF AN EXTENSION CORD.
5. NEVER LEAVE APPLIANCE UNATTENDED WHEN PLUGGED IN.
6. DO NOT PULL, TWIST, OR WRAP THE POWER CORD AROUND THE APPLIANCE.
7. THIS APPLIANCE SHOULD NOT BE USED BY, ON, OR NEAR CHILDREN OR INDIVIDUALS WITH CERTAIN DISABILITIES.
8. KEEP AWAY FROM CHILDREN.
9. DO NOT HANDLE THE APPLIANCE OR THE POWER CORD AND PLUG WITH WET HANDS-THIS MAY CAUSE
ELECTRIC SHOCK.
10. KEEP THE POWER CORD AWAY FROM HEATED SURFACES.
11. USE THIS APPLIANCE ONLY FOR ITS INTENDED USE, AS DESCRIBED IN THIS MANUAL. DO NOT USE ATTACHMENTS
NOT RECOMMENDED BY THE MANUFACTURER.
IMPORTANT SAFETY INSTRUCTIONS

3
12. DO NOT USE OUTDOORS OR OPERATE WHERE AEROSOL (SPRAY) PRODUCTS ARE BEING USED
OR WHERE OXYGEN IS BEING ADMINISTERED.
13. THIS APPLIANCE IS VERY HOT WHEN IN USE. DO NOT LET EYES OR BARE SKIN TOUCH THE HEATED SURFACES.
14. DO NOT REST APPLIANCE ON PLASTIC SURFACES OR OTHER SURFACES THAT ARE SENSITIVE TO HEAT.
CAUTION
To avoid injury to persons and/or material items:
• When inserting or removing the power plug to/from an outlet, hold the plug firmly to keep the cable from peeling.
Do not pull on the cord to remove the plug.
• Stop using immediately if you smell an offensive odor. If ignored, it is possible to cause fire and other accidents.
• This appliance is not a toy and should not be played with by young children.
• Stop use of the appliance and pull out the power cord when there is an earthquake or thunder.
• Never drop or insert an object into any opening.
• Never use while sleeping.
• Pull out the power cord when the electric current is cut off. If not, it can cause fire.
• Do not attempt to repair, overhaul, or try to reconstruct the appliance, in case it causes electric shock,
malfunction, or accidents.
• Do not attempt to clean or wipe the appliance without removing the plug from an outlet. Make sure that the
appliance has cooled down if recently used.
• Do not keep this appliance in a humid place such as a bathroom in case it causes malfunction.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
IMPORTANT SAFETY INSTRUCTIONS

4
1. Plug the appliance into an electrical outlet of AC 120V.
2. SLIDE THE ON/OFF SWITCH TO EITHER 350°F OR 400°F.
3. When indicator light stops flashing and remains “ON” appliance is ready to use. (For sensitive or processed
hair, use lower temperature setting.)
4. To turn the appliance off, slide the switch to the “OFF” position. Verify that the appliance is off by checking
to see if the indicator light is off.
5. Unplug immediately after use and make sure the appliance has cooled down before storing the appliance
in a safe place away from the reach of children.
USER MAINTENANCE INSTRUCTIONS
MAINTENANCE
Your appliance is virtually maintenance free. No lubrication is needed. Keep surfaces clean and free of dust,
dirt, and hair spray. If cleaning becomes necessary, unplug the appliance from the power source and wipe the
exterior with a damp cloth. If the cord becomes twisted, untwist prior to plugging into an electrical outlet.
WARNING: If any malfunction occurs, do not attempt to repair. Immediately return the Hot Fusion Brush to a service
center for repair. Unqualified repair work could lead to hazardous conditions for the user and will void any applicable warranty.
STORAGE
When not in use, unplug appliance. Allow appliance to cool down completely before storage. Store out of reach
of children in a safe, dry location. Do not wrap the cord around the appliance, as this may damage to the cord.
CARE WARNING
• Do not wipe the appliance with thinner, benzene, gasoline, lamp oil, lighter fluid, other solvents, or chemicals
as it may cause accidents and/or malfunctions.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
This appliance is intended for home use. Use on Alternating Current (60Hz) only. Designed to operate at
120VAC. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug
will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

5
USING YOUR HOT FUSION BRUSH
Read All Instructions Before Use.
Learn more ways to style your hair online at www.hotfusionbrush.com
1. Plug in the Hot Fusion Brush.
2. Turn the main switch on, and adjust the temperature setting for your preference.
NOTE: LOW temperature setting is recommended for thin hair and/or damaged hair.
Start using once the blinking-indicator light remains steady.
HIGH temperature setting is ready when the red indicator lights up.
It will take about 30 seconds to reach desired temperature.
3. Use on dry hair only.
4. Simply brush entire hairstyle underneath and on top, to achieve a smoother, shinier
and softer style. Do not allow brush to remain in same spot for more than 5 seconds
as it may damage hair.
STYLE YOUR HAIR
Create maximum fullness, body and bounce with your Hot Fusion Brush. “Ion Ceramic Technology” is used for
added smoothness, shine and body. The spaces between the nylon pins are precisely calculated not to tangle
hair and to minimize frizz. Not only does this product style hair easily, but it also adds shine and softness to hair
that you cannot create with blow-dryers and hair irons.
HOW TO CURL HAIR
• To create J-waves or C-waves, simply brush each section of hair from near the scalp to end of the hair, and
slowly roll the brush at the end of your hair to make the desired wave. NOTE: 170°C temperature setting is
recommended for thin hair and/or damaged hair. Start using once the pilot lamp stays on (lamp blinks until
set temperature is reached).
• Use your other hand to guide the brush through your hair.

• Switch off the Hot Fusion Brush and unplug it.
• Allow to cool before cleaning the comb.
• Do not use any detergents as it will damage the product.
• To avoid damaging brush bristles, do not rest the Hot Fusion Brush against other objects or allow
other objects to rest on top of it.
• Do not wrap cord around the brush.
• If you forget to turn off the Hot Fusion Brush, it will automatically shut off after one hour.
• Keep it in a safe and dry place, free of dust. You may also hang it with the hanging loop.
AFTER USE
Caring for your Hot Fusion Brush.
6
ADD HEIGHT & BODY ON TOP
• For more body on top, brush each section on top from near the scalp and then slowly roll and slide the
brush with your other hand to guide the hair towards rear of the head.
CREATE BANGS AND WAVES
• To create bangs and waves, roll each section as you would a round brush to create maximum body and bounce.
• For waves, begin with a section on the side of your head near the scalp and turn and guide the brush
towards the back of your head.
• Use your other hand to guide the brush through your hair.
PLEASE NOTE:
1. After extended use, the comb and body of the brush may become hot. Be careful not to let it come into contact with
your skin.
2. To avoid damaging your hair, do not hold the appliance at the same spot for more than 5 seconds.
STYLE YOUR HAIR

7
LIMITED LIFETIME
WARRANTY
1. This warranty applies to consumer use only, and is void if the product is used in a commercial
or institutional setting.
2. The warranty extends only to the original consumer purchaser and is not transferable. In
addition, proof of purchase must be demonstrated.
3. This limited warranty is the only written or express warranty given by the manufacturer. Any
implied warranty of merchantability or fitness for a particular purpose on this product is limited
in duration to the duration of this warranty. Some states do not allow limitations on how long
an implied warranty lasts, so the above limitation may not apply to you.
4. Repair or replacement of the product (or, if repair or replacement is not feasible, a refund of the
purchase price) is the exclusive remedy of the consumer under this warranty. The manufacturer
shall not be liable for any incidental or consequential damages for breach of this warranty or
any implied warranty on this product. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion may not apply to you.
5. This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.
PROCEDURE FOR WARRANTY REPAIRS OR REPLACEMENT
The manufacturer warrants that your Hot Fusion Brush is free of defects in materials and workmanship
and will, at its option, repair or replace any defective styler that is returned to it. The appliance’s
heaters are warranted for the lifetime of the original purchaser, and all other parts and components
are warranted for 60 days from the original date of purchase. This warranty is valid only in accordance
with the conditions set forth below:
If warranty service is necessary, the original purchaser must pack the entire product including any
and all accessories securely and send it postage paid with proof of purchase, your mailing address, and
a check or money order for $9.99 to cover return postage and handling to the following address:
Perfecter, P.O. Box 3007, Wallingford, CT 06492.

Read All Instructions Before Use.
© 2014 Tristar Products Inc. All rights reserved.
Distributed by Tristar Products, Inc. • Fairfield, NJ 07004
973-287-5153
HFB_IB_TP_ENG_V1_141119