10
Pull the Memory module from the card cage
(SS-2) and verify the EPROM version is
or higher (right). If not, install the
required upgraded EPROM following ESD
precauons and correct orientaon of the
chip. Reinstall the Memory module aer
compleon.
The required module will
be installed in (SS-4) beneath the Mo-
dem/LCD module. Before installing, verify
that the jumpers on are connected
on If not, move the jumpers to
connect Pins 1 and 2 together (boom right).
Install the Memory Expansion module.
If your machine uses a (le), proceed to step 9.
