TRNDlabs FINESSE Travel Iron User manual

FINESSE
Travel Iron

The FINESSE is the perfect tool for keeping
your clothes looking sharp and wrinkle-free.
Its compact and portable design makes it
ideal for travel, easily fing into your
luggage for convenience on the go.
Thank you for purchasing the
FINESSE Travel Iron and welcome to
the world of TRNDlabs products.

4
5Parts Idenficaon
6Funcons
8Setup
9How To Use
10Specificaons
11Troubleshoong
12Safety Informaon

5
Base
Measuring
Cup
FINESSE
Travel Iron

6
Water
Tank Cap
Steam
Buon

7
Rotang
Handle

8
Setup
Remove the Water Tank Cap and fill the water tank
with water. Use the measuring cup to fill it to the
maximum capacity of 100 ml.
Put the Water Tank Cap back and make sure it seals
the tank properly.
Set the handle into one of the three possible
posions, according to your preference.
Plug the power cord into a power outlet.
Wait for the indicator light on the Steam Buon to
turn off. The FINESSE is now ready to use.

• To let the FINESSE release steam, simply press the
Steam Buon.
• Press the buon again to stop the steaming.
• When ironing, the best effect can be obtained by
rotang the FINESSE an-clockwise on the garment.
• During a short ironing pause or when switching
garments, always place the FINESSE on its stand.
• Turn it off by simply pulling out the plug.
9

10
Input Voltage:
Heang Temperature:
Water Tank Capacity:
Dimensions:
Weight:
110/120V
180°C
100 ml
15.5 x 11.0 x 7.7cm (6.1 x 4.3 x
3.0”)
503 grams (17.8 oz)

11
Problem: The FINESSE is on, but no steam comes out
when pressing the Steam Buon.
Soluon:
• There is no water le in the tank. Turn the FINES
off and refill the tank.
• Internal pipe leak. Reach out to the seller for a
soluon.
Problem: The FINESSE makes a weird noise when
steaming.
Soluon:
• The pumping out of the steam can make a specific
sound, which is normal.
• There is no water le in the tank. Turn the FINESSE
off and refill the tank.

12
• Do not leave the device unaended when plugged
in.
• Do not turn the device upside down.
• Place the device and its stand on a stable surface.
• Unplug the device from the socket when not in use,
and before emptying, filling, or cleaning.
• Do not use the device when there is not enough
water in the tank.
• Do not touch the soleplate of the device if it is hot.
• Allow the device to cool down fully before storing it
away.
• Never use, plug, or unplug the device with a wet
hand.
• To clean it, wipe the exterior of the iron with a damp
cloth. To clean the soleplate, use a non-abrasive cloth.
• Keep the appliance well away from surfaces and
objects that can be damaged by heat.
Safety informaon

13
• Keep the device and the power cord away from any
liquids, apart from the water in the water tank.
• Do not connue to use the device when it shows any
signs of damage or malfunconing.
• Keep the device out of reach of children.
• Ensure the voltage indicated on the iron corresponds
with your local voltage before plugging it in.
• Handle the iron carefully. Dropping it can cause
internal damage or damage to the soleplate.
• Do not use the device for any other purpose than
ironing clothes and fabric.
• Do not use the device on clothes with poor heat
resistance. This can cause discoloraon and
deformaon.
Safety informaon

4081/1/EN