Troy-Bilt TB32S-IN BRAKE User manual

With Brake Function
Three Phase Power Using Occasion
Induction Motor Electronic Brake controller
TB32S-IN BRAKE
User’s Manual
TB32S-IN-TT-V01E
烋
Use smart phone
to scan it to read online
Function
un
1

40
50
70
1
51
20
35 4
4
40
50
70
1
ʬDimension
2
TB32S-IN
MIN 3
About 0.5 seconds
Three Phase AC200-230
MIN 90(Use Brake Resistance in 60W,90W)
MIN 85%
50(L )ƻ40(W)ƻ 70(H )
88
0ǡ+40C
ʬSpecs
1
●Instantaneous STOP
Controller model
Power input (V)
Driver current (A)
Brake current time
Drive Power (W)
Function
Ambient temperature
Ambient humidity
Dimension (mm)
Weight(g)
2

ʬTiming Chart
3
烋Important
Notice
烋Please inquiry with local office or distributor to choose product
˛
RUN/BRAKE STOP
˅SW2,SW3,SW4
˅SW2,SW3,SW4
2.3.4
SW1
AC Power
SW
ON
OFF
˅If you use BRAKE/STOP function, please keep the using frequency
at above 4 seconds. (run for 2 seconds and stop for 2 seconds)If the
using frequency is too high, temperature of the Motor will become
too high. And so making the internal temperature switch and stopping
running. Please consider ventilation and compulsory heat
countermeasures to keep the Motor surface temperature maintained
below 90°C.
˅The BRAKE/STOP function is electronic brake. While braking after
0.5 seconds, the Motor will have no holding torque. Please use with
TROY's Electromagnetic Brake Motor series to brake stop and hold
the Motor position for a long time.
As soon as switching to "RUN",
the Motor will run immediately
the Motor will stop immediately. After Brake for about 0.5 seconds,
the brake current will flow through it. At this time the Motor will have
no holding torque.
As soon as switching to "BRAKE",
Motor
Operation
RUN RUN
RUN
BRAKE
RUN RUNSTOP STOP
BRAKE BRAKE
3

ʬMotor Wiring Diagram
4
˛
Induction Motor Wiring diagram A(6~40W)
2
1
8
3
4
5
7
R
S
T
Yellow
White
Switch Specs Remark
Synchronous
relay
SW1
SW2
SW3
SW4 Spark eliminator
SW1
SW2
SW3
SW4
Spark
eliminator
¥AC250V 5A
¥AC250V 7A
¥AC250V 5A
DC20V 10mA
0.1uF,120Ω Fitting:
RFN2E104K
RUN
RUN
RUN
BRAKE
BRAKE
BRAKE
Black
Motor
Please make sure to have the spark eliminator be
connected to the relay or switch part.
Fitting濣RFN2E104K,0.1uF,120Ω
If not connecting the spark eliminator, the relay
contacts will be easily old and damage.And then
make the controller damage.
4

2
1
6
3
4
5
7
SW2
SW3
SW4
R:30Ω 20W
SW1
SW2
SW3
SW4
R:5HVLVWRU
¥AC250V 5A
¥AC250V 7A
¥AC250V 5A
DC20V 10mA
0.1uF,120Ω
30Ω 20W
:LQGLQJUHVLVWRU
˛
Induction Motor Wiring diagram B(60~90W)
R
S
T
SW1
Below is diagram for CW(Clockwise),if changing to CCW(
Counterclockwise)please make the power supply R, S swapped
(While switching, make sure there is no brake current)
RUN
RUN
RUN
BRAKE
BRAKE
BRAKE
Yellow
White
Black
Motor
Spark eliminator
Please make sure to have the spark eliminator be
connected to the relay or switch part.
Fitting濣RFN2E104K,0.1uF,120Ω
If not connecting the spark eliminator, the relay
contacts will be easily old and damage.And then
make the controller damage.
Switch Specs Remark
Spark
eliminator Fitting:
RFN2E104K
Synchronous
relay
5

WARNING
蘼
ʰ
May cause dead or serious injury etc.
Take protective device of over current, instant stop,
over temperature, ground fault interrupter.
蘼
Prevent fire, injury, electric shock
Do not use product near explosive, water, corrosive
gas, or combustible material.
蘼
蘼
蘼
蘼
蘼
蘼
蘼
It may cause fire
Do not forcibly put stress, or lead a heavy article on
or stuff foreign matter into it.
It may cause electric shock, trouble,
and damage
Avoid damage caused by earthquake, fire, artificial
accident, please set and fix it for confirmation.
Prevent electric shock, injury, fire,
trouble and damage
Install an external emergency stop circuit to turn the
power off in the instant halt of operation.
Prevent electric shock, injury, fire,
trouble and damage
Connect the Brake and Motor to ground. Prevent electric shock
Neither reach nor touch the Brake terminals while
power is on. It may cause electric shock
Execute safety examination after earthquake Prevent fire, injury, electric shock
Have a professional expert set the wiring construction
accurately.
Prevent electric shock, injury, fire,
and trouble
Do not work for moving, wiring or inspection with the
power on
Prevent electric shock, injury, fire,
and trouble
Do not touch the internal parts of the Brake. It may cause electric shock , scald
Do not stand/sit on product or put heavy article on it. It may cause electric shock, trouble,
damage
Ensure that wiring has been correctly done. Prevent injury trouble, damage
ʰ
Please dealing according to industry littering as discarding the product.
6

ATTENTION
蘼
蘼
蘼
蘼
蘼
蘼
蘼
ʰ
May cause injury or product damage.
When conducting trial operation, make Motor fixed.
Confirm motion before composing machine system. Prevent injuiry
When temperature of Brake or Motor is rising,
please do not touch it. It may cause scald.
Do not reform, assemble or repair the Brake.
Move the product with a great care so as to prevent
from the danger such as tumble or turnover.
It may cause electric shock,
injury, fire.
It may cause injury, damage.
When power recovers after interruption, don’t approach
devices since it may restart operation suddenly. It may cause injury.
Please follow the appointed voltage. Prevent injury, fire, electric shock
Do not cut-in or off the power frequently. It may cause trouble.
Do not use damaged Brake or Motor. It may cause injury, fire.
Do not put obstacle around Brake and Motor or it'll
be airless. It may cause scald, fire.
Please have the cause troubleshooting as tripping,
and restart after safety confirming. Prevent injury
Have an expert execute maintenance and inspection. Prevent injury and electric shock
Neither block nor stuff the aspiration/exhaust vent
with foreign particle.
It may cause electric shock, trouble ,
fire.
Use Brake and Motor in designed combination. Prevent fire
Do not put a heavy impact on shaft of Motor and Brake. It may cause trouble.
Please turn power off as stop using for a long period. It may cause injury from wrong
operating.
Mount the product on an incombustible material such
as metal. Prevent fire
Do not set magnetic contactor in main power during
Motor rotating or stopping. It may cause trouble
Do not drive Motor axis from external. It may cause fire, trouble, electric
shock.
7

Made in Taiwan
www.troy.com.tw
ʰ Responsibility of environment protection
We place important on spreading environment
protection. Each package can be recycled.
Please using litter dealing process and
recycling to replace the old product.
ʰġ We won’t inform individually if we promote
the product characteristics. Please inquiry with
each office. Thank you very much.
--- By your attending, we protect the earth together. ---
㹿㞯䭠㐏到₌㢘柟⋻▇
TROY ENTERPRISE CO., LTD! Npups!nbovgbduvsfs
8