True MD-2B User manual

Model: MD-2B
User Guide
Mini Duo Burner

Table of Contents
I. Important Safety Information 1-3
II. Control Panel Overview 4
III. Specifications & How to Use
IV. Notes on using your Cooktop
5
• Operating the Keys 5
• Stand by Mode 5
•Lock 5
•Switch off the Lock 5
• Readiness Mode 6
•Menu On 6
• Power Sharing 7
• Set Timer Mode 7
8
8-9
• Hot Surface Indicator 7
7
V. Compatible Cookware
VI. Cleaning and Maintenance
VII. Counter Installation Instruction 10-11
VIII. Troubleshooting 12-13
Thank you for purchasing the True Induction Mini Duo burner unit. Please read the entire instruction manual
prior to using your unit. If you have any questions regarding the True Induction Cooktop, please visit
TrueInduction.com or call: 1-877-862-7049
Fill out the following information for future reference
Note: The serial and model numbers may be found on the serial plate located under the cooktop.
Brand
Purchase Date
Model Number
Serial Number
Purchased From
Invoice Number
True Induction
MD-2B

•
even with the built-
•
only be performed by a qualified person.
•While cooking fat or oil on the cooktop may ignite. There is a risk of burning and fire; therefore, never leave the
cooktop unaended at anyme.
• When the unit is on, do not touch outside the control panel as the surface may contain residual heat.
• To protect against electric shock, do not immerse cord plugs or cooker in water (or other liquid substances).
• When using any electric appliance around children, close supervision is required.
•
manner. Read the seller’s guidelines for warranty repairs and returns.
• Do not cook on a broken or damaged cooktop as spillovers may penetrate surface and create a risk of electric shock.
•
•
• Do not let the cord dangle over the edge of a table or counter. Keep the cord away from hot surfaces.
• Do not place cooktop on or near: hot gas, electric burner, or heated oven.
•
• Do not store and temperature-
sprays, etc.
•
•
•
• The cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by
children or tripped over.
• Do not use with empty pans/pots.
• Do not use cooktop for another use than directed by the manufacturer.
• Wear proper apparel -
• In case of appliance failure, immediately disconnect the appliance from the main power source and contact the
manufacturer.
1
• Do not place metallic objects such as knives, forks, spoons, lids, cans or aluminum foil on the cooktop.
:

•
• It is important to be aware that the unit’
•When possible, Unplug the cooktop from the outlet when not in use and before cleaning. Allow to cool before
performing any maintenance or repairs.
•-
heated surface.
• Do not store items of interest to children in cabinets above the range or on the backguard of a range - children climbing
on the range to reach items could get seriously injured.
•
• Do not repair or replace any part of the appliance unless specifically recommended in the manual. All other services
should be referred to a qualified technician.
or other bulking cloth.
• Use only dry potholders - Moist or damp potholders on hot surfaces may result in burns from steam. Do not use a towel
• Use proper cookware size - Choose
cookware is necessary to operate properly.
•-
the manual. Improper use of these liners may result in a risk of electric shock or fire.
•
•
Do not use steam cleaners or high
-
pressure cleaners to clean the cooktop, as this may result in electric shock.
• Do not touch cooking zones or areas near units - Cooking zones may be hot even though they are dark in color. Areas
2
This product should not be thrown away as household waste. Instead it should be handed over to the applicable
this product, please contact your local city office, your household waste disposal service or the store where you
purchased the product.
SAVE THESE WARNINGS
:
of undersized cookware will
serious injury. Compable

II. Control Panel Overview:
1.
2.
3.
Right Cooking Zone
4. Le touch control panel
5.
Ceramic - Glass
Right touch control panel
Diagram make look different from actual product.
1
2
4
5
3
6
78
910 11
12
6. Power Opon Display
7. Lower power key
8. Raise power key
9. Cooking zone ON/OFF Key
10.Timer control key
11.Child safety lock
Power Buon
12.
3
Power
Menu-On
Timer Lock
POWER
Temp Time
-- +
UU
Power
Timer
Temp Time
-- +
Menu-On
Lock
POWER
Power
Menu-On
Timer Lock
POWER
Temp Time
-- +
Surface remains hot after use. Do not touch!
Attention: Le dessus reste chaud pres usage!
by true
INDUCTION
Le Cooking Zone

4
Power 1800
Voltage 120V / 60Hz
Power Range 100W - 18
10
Max Time 180 minutes
Material Glass Ceramic Top / Metal Body
Unit Measurements 20.5” width x 14” length x 2” height
Countertop or Drop-in
Installs Over Built-in Oven Yes
20” x 13 3/4”
Stand by Mode
In the lock mode, press “Lock” key, the unit will make a “beep” sound once and lock light will turn off, indicang the
lock has deacvated. The unit is now on standby mode.
Lock
Acvang the Child Safety Lock during cooktop use: Child Lock prevents acvaon of any sensor key,
except for the “POWER” key to turn off the cooktop.
A. Manual: Press the Lock key to acvate the funcon. The unit will make a “beep” sound and the
indicator light will turn on above the Lock key. The controls are now locked.
B. Automac: The inducon cooktop will automacally enter into Lock mode when the power is turned off.
Switch Off the Lock
While in Lock mode, press the Lock key to deacvate the funcon. The indicator light will turn off.
Upon inserng the power plug into an electric socket, all inducon cooktop will make a “beep”
sound once, and all the digital lights on the cooktop will blink once, then the indicator light will turn
on above the “Lock” key, indiccang the unit enters into the standby and lock mode.
Menu-On
Lock
POWER
:

Turning Off Unit:
POWER
III. Specificaons & How to Use:
When use of the cooktop is complete, press the “POWER” key. “POWER” light will turn off, indicang the
unit is now on the standby mode. Please do not pull the power plug unl the cooling fan has stopped.
Menu On
5
Place cookware on the cooktop. Please select from the Power Seng or Temperature Seng to begin cooking.
Temperature Seng Mode: This funcon cooks at temperature sengs.When the unit is in the Readiness mode, or
in the power mode, press the “Menu On” key to select “Temp” mode. The “Temp” indicator light is lit up and the
digital display shows “460” F, indicang that the cooktop has entered the temperature seng mode. if the user
wants to adjust the temperature level, please press the “-” or “+” key to adjust the temperature seng. To stop
cooking, please press the “POWER” key. Temperature levels: 120℉、150℉、180℉、210℉ 、 260℉ 、300℉ 、
360℉ 、 420℉ 、460℉.
Power Seng Mode: This funcon cooks at power (waage) sengs. When the unit is in the Readiness mode, or in
the set temperature mode, press the “Menu-On” key to select the “Power” mode. “Power” indicator light is lit up,
and the digital display show “5”, indicang that the cooktop has entered power seng mode, if the user wants to
adjust the power level please press the “-” or “+” key. If the user wants to set the mer for the unit to shut off
automacally, please refer to the Set Timer method. To stop cooking, please press “Power” key. Heang power level
sengs:
NOTE: This funcon is equipped with safeguards against parching. The unit might shut off automacally when this
funcon is used for frying, srfrying, grilling and other high temperature cooking formats.
Readiness Mode
While in the standby mode, press the “ON/OFF” key, it will make a “beep” sound once, indicang that the inducon
cooktop funcons are ready to use. The unit will automacally return to standby mode if heang zone is not turned
on within 30 seconds.

III. Specificaons & How to Use:
6
To Cancel Timer: While in mer status, press “Timer” key, the digital display shows countdown me. Then press
“+” or “-” key unl the digital display reads “00” and mer display will blink for 10 seconds and then go off. The mer
is no longer acve.
Hot Surface Indicator
After using any of the cooking zones, the cooktop will remain hot. Even after turning o the
entire unit, the surface of the cooktop will remain hot for some time. The display for the cooking
zones will show how an “H”to warn the user that the surface is hot to touch. Wait unl the “H” is no
longer displayed to clean the unit. You may turn the unit back on even if the “H” is displayed.
●This appliance will get hot during use and will remain hot for a me aer use.
● Never heat empty cookware. This can damage both the cookware and the appliance.
● Remember to turn off cooktop aer use.
● Keep unit away from a gas range or other heat source. If the surrounding temperature is too hot, the cooktop will
stop heang.
● Make sure to wipe off water from the boom of the pot before heang.
● Use cauon when boiling water. During the boiling process, hot water may splash out.
IV. Notes on Using your Cooktop
Power Sharing
When both burners are on, one of the two burners would not have a power level higher than level 7. Both of them
together would not be more than level 10. If only one burner is on, the heang zone can maintain its full heat seng,
but when operang both burners, their combined total is level 10, meaning that when operang the two burners at
the same me, they will self adjust levels accordingly. When you increase the power of one side, the power output of
the other side will reduce automacally (i.e. one side is at 6, the other burner automacally reduces
power to level 4, creang a total max 10 seng).
Set Timer Mode
The automac mer sengs range from 1 minute to 99 minutes. (NOTE: there is no “seconds” and “hours”
display, only minutes). when the unit is in the cooking mode press the “Timer” key. The “Timer” indicator light is lit
up, indicang the cooktop has entered Set Timer Mode, the digital display reads “00” and blinking. Press “+” or “-”
key to set the desired number, once the Timer is set and neither the “+” nor the “-” key is pressed for 10 seconds, the
Minute Timer begins the countdown and the mer reaches “00” the cooktop will sound “beep” and the specific
heang element will shut off automacally.

materials.
Check your cookware’s retail box for the
technology, grab a magnet and see if it
your magnet stays on then your cookware
cooktop!
V I. Cleaning and Maintenance:
manual. Use a ceramic cooktop cleaner on the glass cooktop. To maintain and protect the surface of your glass
cooktop, follow these steps:
Before
makes cleanup easier.
1. Daily use of ceramic cooktop cleaner will help keep the cooktop looking new.
2.
3.
4. Use a dry cloth or paper towel to remove all cleaning residue. No need to rinse. Never run the cooktop under
water.
NOTE:
The following are not -resistant
glass, ceramic, copper, aluminum pan/pots,
round-
base less than 5 inches.
7
UU
Power
Timer
Temp Time
-- +
Menu-On
Lock
POWER
Power
Menu-On
Timer Lock
POWER
Temp Time
-- +
Surface remains hot after use. Do not touch!
Attention: Le dessus reste chaud pres usage!
by true
INDUCTION
V. Compable Cookware:

Cleaning Burned-on Residue:
WARNING: Damage to the glass surface may occur if you use scrub pads or any other type of abrasive cleaning
materials.
1. Allow the cooktop to cool.
2. Spread a few drops of the ceramic cooktop cleaner on the burned residue area.
3. Using the included ceramic cooktop cleaning pad, rub the residue area, applying pressure as needed.
4. If any residue remains, repeat the steps listed above.
5.
cleaner and a paper towel.
Cleaning heavy burned-on residue:
1. Allow the cooktop to cool.
2. Used a single-edge razor blade scraper approximately at a 45 degree angle against the glass surface, and scrape
offthe residue.
3.
residue area. Use the cleaning pad to remove any remaining residue.
4.
cleaner and a paper towel.
Metal Marks and Scratches:
Be careful not to slide pots or pans across the cooktop surface. It will leave behind metal markings. These marks are
removable using the ceramic cooktop cleaner along with the cleaning pad for ceramic cooktops.
permanent.
NOTE:
manufacturer for assistance.
8
V I. Cleaning and Maintenance:

Warning!
For Your Safety: Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other
be avoided. If cabinet space is available, the risk can be reduced by installing a range hood that protects horizontally
IMPORTANT INSTALLATION INFORMATION
All electric cooktops run offa single phase, three-wire cable, 240V/60Hz AC only electrical supply with ground.
Minimum distance between cooktop and overhead cabinetry is 30”.
9
NOTE: See next pages for Measurement Specificaons

10
Before installing the cooktop:
1. Visually inspect the cooktop for damage.
2. Place th e cooktop into the countertop
cutout to ensure it fits properly
The serial plate is located under the
cooktop. When ordering parts or making
inquiries about your cooktop, be sure to
include the model and serial numbers.
Serial plate is located under the burner box of
the cooktop.
VI
.
Also make sure all cooktop screws are
on tight. Recheck all measurements to
ensure they are correct.
Allow a 2" space below the covered cable opening to clear the
electric cable and allow space for installation of the junction
box on the wall at the back of the cooktop.

Error Code Possible Cause
Cooktop does not
work
•Cooktop controls are locked.
•Power outage.
•Make sure Lock mode is turned off.
•Check house lights to confirm power outage.
•Contact manufacturer.
Cooktop does not
heat up
•No cookware or improper cookware
placement on the cooking zone.
•Incorrect cookware size for selected
cooking zone.
•
the cooking zone.
•Incorrect cooking zone detected
•No power to cooktop
•Make sure the cookware is centered on the
cooking zone, and the cookware is also of correct
Cookware page.
•
enough to cover the cooking zone.
•
centered on the cooking zone.
•Make sure the correct control is ON for the
cooking zone being used.
•See “Cooktop does not work” issue above.
Cooktop turns off
while cooking
•Internal cooktop heat sensor has
detected high temperatures inside
shutoff.
•Liquid or objects placed around the
control panel.
•Make sure the cooktop vents are not blocked.
•
•The cooktop control panel may read liquids or
the cooktop to shut off. Clean up spills or remove
objects, then restart the unit.
The fans keep
running for one
unit has been
switched off
•The electronics are cooling down. •This is a normal occurrence.
11
•IGBT - Insulated Gate Bipolar Transistor • NTC - Negave Temperature Coefficient, to check the temperature of electronic
elements • NTC1 - To check the temperature of IGBT • NTC2 - To check the temperature of heang center

Power sharing •When two heang zones are turned
on, will create a totla max 10 seng
Transistor) overheang.
•See POWER SHARING
Error Code Possible Cause
“E0” appears in the
Timer display
••
unit.
“E1” appears in the
Timer display
•No cookware found or improper
placement of cookware on the
cooking zone.
•Make sure the cookware is centered on the
cooking zone, and that it’
“E2” appears in the
Timer display
•Supplied voltage to cooktop is too
low.
•If the voltage of the power supply to the cooktop
is too low, it cannot operate properly and will
show this error code.
This may be caused by reduced voltage being
are correct and supplied voltage returns to
normal, the code will disappear.
“E3” appears in the
Timer display
•Supplied voltage to cooktop is too
high.
•If the voltage of the power supply to the cooktop
is too high, it cannot operator properly and will
show this error code.
This may be caused by increased voltage being
are correct and the supplied voltage returns to
normal, the code will disappear.
“E7” appears in the
Timer display
•NTC1 (To check the temperature of
IGBT) break off
•Turn OFF the cooktop; then shut offthe power at
the fuse or circuit breaker for about 30 seconds.
Turn the power back on to the cooktop then
service.
“E8” appears in the
Timer display
•NTC1 (To check the temperature of
IGBT) short circuit
“E9” appears in the
Timer display
•NTC2 (to check the temperature of
heang center) break off
“EE” appears in the
Timer display
•NTC2 (to check the temperature of
heang center) short circuit
12
(Insulated Gate Bipolar