True TWT-67F User manual

Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
ROUGH-IN DATA
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366
[phone] • FAX [phone] • [phone] • www.truemfg.com
Parts Dept. (800)424-TRUE • Parts Dept. FAX# [phone]
Model:
TRUE FOOD SERVICE
EQUIPMENT, INC.
Project Name:
Location:
Item #: Qty:
Model #:
AIA #
SIS #
Printed in U.S.A.
APPROVALS:
T RUE R EFRIGERATION
MADE IN
SINCE 1945
U.S.A.
TM
AVAILABLE AT:
TWT-67F
TWT-67F
Model Doors
Capacity
(Cu. Ft.)
(liters) Shelves
Cabinet Dimensions
(inches)
(mm)
LD
†H*HP Voltage Amps
NEMA
Config.
Cord
Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)
TWT-67F 2 20.6
584
467
1/4
1709
323/8
823
333/8
848
3/4115/60/1 11.7 5-15P 7
2.13
405
184
† Depth does not include 1" (26 mm) for rear bumpers and 1/4"(7 mm) for front bumper.
* Height does not include 61/4" (159 mm) for castors or 6" (153 mm) for optional legs.
12/05
True’s deep worktop units are
designed with enduring quality that
protects your long term investment.
Designed using the highest
quality materials and components
to provide the user with colder
product temperatures, lower utility
costs, exceptional food safety and
the best value in today’s food
service marketplace.
Extra large evaporator coil balanced
with higher horsepower compressor
and large condenser maintains -
10°F (-23.3°C) cabinet temperatures.
Ideally suited for both frozen foods
and ice cream.
All stainless steel front, top and
cabinet ends. Matching aluminum
finished back. Cabinet top and
backsplash - one piece formed
construction. Bacteria and food
particles can not be trapped
underneath as with other two-piece
worktop units.
NSF approved, white aluminum
interior liner. 300 series stainless
floor with coved corners.
Foamed-in-place, high density
polyurethane insulation
(CFC free).
Heavy duty PVC coated wire
shelves.
Automatic defrost system time-
initiated, time-terminated.
Deep Worktop:
Solid Door Freezer
®

STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366 • [phone] • FAX [phone] • [phone] • www.truemfg.com
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
KCL
Model Elevation Right Plan 3D
PLAN VIEW
TWT-67F TFPY22E TFPY32S TFPY22P TFPY223
TWT-67F
DESIGN
• True’s commitment to using the
highest quality materials and oversized
refrigeration systems provides the user
with colder product temperatures, lower
utility costs, exceptional food safety and
the best value in today’s food service
marketplace.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using
environmentally friendly (CFC free) R404A
refrigerant.
• Oversized, factory balanced refrigeration
system with guided airflow to provide
uniform product temperatures.
• Extra large evaporator coil balanced
with higher horsepower compressor and
large condenser; maintains -10°F (-23.3°C)
cabinet temperature. Ideally suited for
both frozen foods and ice cream.
• Sealed, cast iron, self-lubricating
evaporator fan motors and larger fan
blades give True worktop units a more
efficient low velocity, high volume airflow
design. This unique design insures
faster temperature recovery and shorter
run times in the busiest of food service
environments.
• Condensing unit is accessed from
behind front grill; slides out for easy
maintenance.
• Automatic defrost system time-
temperature-terminated.
CABINET CONSTRUCTION
• Exterior - stainless steel front, top and
ends. Matching aluminum finished back.
Top and backsplash - one piece formed
construction.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless floor
with coved corners.
• Insulation - entire cabinet structure and
solid doors are foamed-in-place using
high density, CFC free, polyurethane
insulation.
• 5" (127 mm) diameter stem castors - locks
provided on front set. 36"
(915 mm) work surface height.
DOORS
• Stainless steel exterior with white
aluminum liner to match cabinet interior.
• Each door fitted with 12" (305 mm) long
recessed handle that is foamed-in-place
with a sheet metal interlock to insure
permanent attachment.
• Positive seal doors swing within cabinet
dimensions.
• Magnetic door gaskets of one piece
construction, removable without tools for
ease of cleaning.
SHELVING
• Four (4) adjustable, heavy duty PVC
coated wire shelves 235/8"L x 28"D
(601 mm x 712 mm). Four (4) chrome
plated shelf clips included per shelf.
• Shelf support pilasters made of same
material as cabinet interior; shelves are
adjustable on 1/2" (13 mm) increments.
MODEL FEATURES
• Evaporator is epoxy coated to eliminate
the potential of corrosion.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for final connection to a 115/60/1
phase - 15 amp dedicated outlet. Cord
and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ 6" (153 mm) standard legs.
❒ 6" (153 mm) seismic/flanged legs.
❒ 21/2" (64 mm) diameter castors.
❒ Single utility shelf.
❒ Double utility shelf.
❒ 30" (762 mm) deep, 1/2" (13 mm) thick,
white polyethylene cutting board.
Requires “L” brackets.
❒ 30" (762 mm) deep, 1/2" (13 mm) thick,
composite cutting board.
Requires “L” brackets.
❒ Half bun tray racks. Holds 18"L x 26"D
(458 mm x 661 mm) sheet pans
(sold separately).
❒ Additional shelves.
❒ Heavy duty, 16 gauge tops.
❒ Heavy duty package - 16 gauge tops,
20 gauge door, sides and back with
stainless interior.
❒ Remote cabinets (condensing unit
supplied by others; system comes
standard with 404A expansion valve and
requires R404A refrigerant). Consult
factory technical service department for
BTU information.
115/60/1
NEMA-5-15R
Deep Worktop:
Solid Door Freezer
ELEVATION RIGHT VIEW
391/2"
(1004 mm) 293/4"
(756 mm)
335/16"
(847 mm)
3515/16"
(913 mm)
39/16"
(91 mm)
81/4"
(210 mm)
123/4"
(324 mm)
671/4"
(1709 mm)
TR UE
63/16"
(158 mm)
255/32"
(639 mm)
1/4"
(7 mm)
5817/32"
(1487 mm)
323/8"
(823 mm)
1"
(26 mm)
25/8"
(67 mm)
131/32"
(51 mm)
3013/32"
(773 mm)
39/16"
(91 mm)