True TMC-34 User manual

Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8"(millimeters rounded up to next whole number).
ROUGH-IN DATA
Model:
TRUE FOOD SERVICE
EQUIPMENT, INC.
Project Name:
Location:
Item #: Qty:
Model #:
AIA #
SIS #
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366
[phone] • FAX [phone] • [phone] • www.truemfg.com
Parts Dept. (800)424-TRUE • Parts Dept. FAX# [phone]
Printed in U.S.A.
APPROVALS: AVAILABLE AT:
T RUE R EFRIGERATION
MADE IN
SINCE 1945
U.S.A.
.S.A.
TM
U.S.A.
TMC-34
TMC-34
** Length does not include 1/8" (4 mm) each side for lid pins.
†Depth does not include 1" (26 mm) for front bumpers.
*Height does not include 51/8" (131 mm) for castors.
Milk Cooler:
White Aluminum Interior / White Vinyl & Stainless Steel Exterior
10/06
True’s commitment to using the
highest quality materials and
oversized refrigeration systems
provides the user with colder
product temperatures, and lower
utility costs in an attractive,
durable school milk cooler.
Oversized, forced-air
refrigeration system maintains
milk temperatures of 33°F to
38°F (.5°C to 3.3°C). Colder
holding temperatures provide
better tasting milk, increased
sales and less product waste.
Exterior - non-peel or chip
white laminated vinyl front,
sides, back and top; durable and
permanent.
All stainless steel self-service
doors feature convenient drop
front and “hold-open” flip-up
top. Standard with door locks.
Interior - attractive, NSF
approved, white aluminum
liner with reinforced, 300 series
stainless steel floor.
Designed to hold 8 milk crates.
Standard with heavy duty floor
racks and convenient clean out
drain.
Entire cabinet structure and
solid doors are foamed-in-place
using high density, CFC free,
polyurethane insulation.
Model Doors
Capacity
Floor
Racks
Cabinet Dimensions
(inches)
(mm)
L** D†H*HP Voltage Amps
NEMA
Config.
Cord
Length
(total ft)
(total m)
Crated
Weight
(lbs.)
(kg)
(Cu. Ft.)
(liters) Crates
TMC-34 2 13.8
391
8234
864
333/8
848
411/2
1055
1/3115/60/1 8.3 5-15P 9
2.74
325
148
®
R

STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • [phone] • FAX [phone] • [phone] • www.truemfg.com
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation Right Plan 3D
PLAN VIEW
KCL
TMC-34 TFQ065E TFQY60S TFQY65P TFQY653
Milk Cooler:
White Aluminum Interior /
White Vinyl & Stainless Steel Exterior
TMC-34
DESIGN
• True’s commitment to using the
highest quality materials and
oversized refrigeration systems
provides the user with colder product
temperatures, and lower utility costs
in an attractive, durable school milk
cooler.
REFRIGERATION SYSTEM
• Factory engineered self-contained,
capillary tube system using
enviromentally friendly (CFC free)
134A refrigerant.
• Extra large evaporator coil balanced
with higher horsepower compressor
and large condenser; maintains milk
temperatures of 33°F to 38°F (.5°C to
3.3°C). Colder holding temperatures
provide better tasting milk, increased
sales and less product waste.
• Sealed, cast iron, self-lubricating
evaporator fan motor(s) and larger
fan blades give True merchandisers
a more efficient, low velocity, high
volume airflow design. This unique
design insures colder holding
temperatures and faster recovery in
high use situations.
• Condensing unit accessed from
behind back grill, slides out for easy
cleaning and maintanance.
CABINET CONSTRUCTION
• Exterior - non-peel or chip white vinyl
front, sides, back and top; durable
and permanent.
• Interior - attractive, NSF approved,
white aluminum liner with
reinforced, 300 series stainless steel
floor. Standard with heavy duty floor
racks.
• Insulation - entire cabinet structure
and solid doors are foamed-in-
place using high density, CFC free,
polyurethane insulation.
• Welded, heavy duty galvanized frame
rail dipped in rust inhibiting enamel
paint for corrosion protection.
• Frame rail fitted with four (4) easy
roll, 4" (102 mm) diameter swivel
castors (front castors lock in place).
• Designed to hold 8 milk crates.
DOORS
• All stainless steel self-service doors
feature convenient drop front and
“hold-open” flip-up top. Door
support bumpers standard.
• Door locks standard.
• Magnetic door gaskets of one piece
construction, removable without
tools for ease of cleaning.
MODEL FEATURES
• Exterior digital temperature display.
• Evaporator is epoxy coated to
eliminate the potential of corrosion.
• Convenient clean out drain with 1/2"
(13 mm) NPT-PVC drain plug.
• Listed under NSF-7 for the storage
and/or display of packaged or bottled
product.
ELECTRICAL
• Unit completely pre-wired at factory
and ready for final connection to a
115/60/1 phase - 15 amp dedicated
outlet. Cord and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒A variety of exterior color options
available, see www.truemfg.com for
latest offerings.
❒6" (153 mm) standard legs (mounting
plates required).
❒6" (153 mm) seismic/flanged legs
(mounting plates required).
❒Corner bumpers.
❒See www.truemfg.com for school
milk profit calculator.
❒Remote cabinets (condensing unit
supplied by others), consult factory
technical service department for BTU
information.
115/60/1
NEMA-5-15R
ELEVATION PLAN VIEWRIGHT VIEW
35
°F
161/16"
(408 mm)
531/2"
(1359 mm)
151/2"
(394 mm)
181/2"
(470 mm)
34"
(864 mm)
1"
(26 mm)
493/8"
(1255 mm)
3/16"
(5 mm)
347/32"
(870 mm)
301/2"
(775 mm)
239/16"
(599 mm)
469/16"
(1183 mm) 411/2"
(1055 mm)
147/16"
(367 mm)
51/16"
(129 mm)
335/16"
(847 mm)
345/16"
(872 mm)
13"
(331 mm)
7/64" (3mm)
Lid pin
BACK VIEW
1/2" (13mm)
NPT PVC
Drain Plug
4"
(102 mm)