TruGolf APOGEE User manual

GETTING STARTED
Welcome to APOGEE 1
Packaged Items 2
HARDWARE
Overview 3-4
Installation 5-8
Wiring 8-9
GET ACQUAINTED
System info 10-12
“Hey APOGEE”
Voice Commands 13-14
APOGEE CONTROL CENTER (ACC)
Status 16
Tools 17
Support 18
CONTACT CUSTOMER SUPPORT
Monday–Friday
9:00 am–5:00pm MST
Toll Free: 877-711-6691
Direct Line: 801-677-1123
https://trugolf.com/support
Designed and Assembled in the USA
CONTENTS

Before installation, please review the included
components and familiarize yourself with the
Launch Monitor.
To complete installation, you will need:
• Ladder
• Plumb bob
• Measuring Tape
• Pencil
• Laser Level
• Drill
• Stud Finder
For users mounting APOGEE in custom, or non-
simulator bay environments, additional hardware
may be required to achieve functional launch monitor
placement.
APOGEE must be securely installed between 9’ to 10’
feet above the hitting surface.
GETTING STARTED
WELCOME TO APOGEE
1

HARDWARE
1. APOGEE Launch Monitor
2. APOGEE Ceiling Mount
PAPER
3. APOGEE Calibration Template
• Use this to complete calibration inside the
APOGEE Control Center Software
4. “Hey APOGEE,” Voice Command Instruction
• User Guide to the Voice Command feature
5. APOGEE User Guide
6.E6 CONNECT Product Key
• Download E6 CONNECT, create your
account, and redeem this product key
• This can be done at: portal.e6golf.com
CABLES
7. CAT6 Cable (50’)
8.USB to CAT6 Network Adapter
9. Power Cable
TOOLS AND EQUIPMENT
10. Laser Level
11. Mounting Hardware
• Wood Screws
• Drywall Anchors
• Fender Washer
MISCELLANEOUS
12. Reflective Dots
GETTING STARTED
PACKAGED ITEMS
2

HARDWARE
A. Ceiling Bracket
B. Mounting Slot
C. Mounting Screws
D. Cable Inputs
E. System Status Indicator (SSI)
The APOGEE logo color will change according to
status
F. System Connection Indicator (SCI)
The SCI lightbar will change color upon error
G. Center Camera
H. Offset Camera
I. APOGEE Laser Indicator
Projects ball placement pattern on ground
J. Microphone
K. Infrared Lighting System
These are internal, with the light passing
through the acrylic faceplate.
OVERVIEW
3

HARDWARE
FRONT VIEW
BACK VIEW
4

HARDWARE
INSTALLATION
5
To identify the centerline of your simulator, place reflective dots
at the center of your Tee Box (desired hitting area) and the
center point of your screen. Align the included laser level with
the two dots to determine the centerline of your simulator.In the
majority of simulators, this will be in the center of your space.
APOGEE should be installed on a flat, level surface and has to be installed
between 9’-10’. The APOGEE mount is threaded and can be attached
to a universal projector mount for ceiling heights over 10’ in height. For
secure installation, wooden backing is recommended. APOGEE has a
fixed position Tee Box. Installation starts with YOU knowing where you
want your Tee Box to be, and installing APOGEE in the correct position
to accommodate it. Accuracy of APOGEE depends on an accurate
installation.
NOTE: If your mat is not centered in your simulator
space, the centerline at the screen should
match the offset of the mat.
1

HARDWARE
6
2 Measure the distance from the turf to ceiling and use the
table below to find your “Tee to APOGEE” distance. Using
your “Tee to APOGEE” distance, measure forward from the
center of your desired tee location and place a mark on the
floor with one of the included Reflective Dots. Using a plumb
bob, place a corresponding mark with a pencil on the ceiling.
Ceiling Height
in Centimeters Tee to APOGEE
274-278 53
279-285 56
286-293 58
294-300 61
301-305 64
Ceiling Height
in Inches Tee to APOGEE
108”-109” 21”
110”-112” 22”
113”-115” 23”
116”-118” 24”
119”-120” 25”

HARDWARE
INSTALLATION CONT’D
7
The APOGEE Mount ships attached to APOGEE. Detach it from
APOGEE by loosening the 4 screws, front and back.
To ensure the mount is parallel to the
screen, rotate and adjust the mount
until the laser bisects all center holes
and tighten down center screw.
Attach the APOGEE Mount using one of the included screws and
fender washer through the center hole on the mount to the mark
on the ceiling.
3
4
5
DO NOT TIGHTEN FULLY AT THIS POINT
Note: Screws included for mounting to Drywall or wooden surface.
DO NOT REMOVE SCREWS

Connect the power and the network cable into the back of the APOGEE
unit.
HARDWARE
WIRING
8
Tighten the 2 screws in the front and
2 screws in the back to secure APOGEE
to the mount.
Add additional screws to
secure the APOGEE Mount
to the ceiling.
6
8
7Slide APOGEE up into
the mount and then
over and down into
the slotted section.

HARDWARE
WIRING CONT’D
9

GET ACQUAINTED
WITH APOGEE
10
APOGEE is a ceiling mounted, photometric Launch Monitor.
It measures spin without the need for specialty golf balls and records club
data without marked clubs.* The product includes: Voice Commands,
Laser Indicator, Point of Impact Replay, Auto Diagnostic and Auto Calibra-
tion.
*Note: Some lighting environments and some custom club nishes may require
a metallic sticker for accurate Club Face Angle data. However, trajectory data is
derived from the measured ball characteristics.
THE APOGEE CONTROL CENTER (ACC) -is a standalone software to
help owners manage their APOGEE Launch Monitor. The system
includes diagnostic and automated calibration features to make
identifying and solving any technical problems simple.
CALIBRATION - Launches the Automated Calibration Wizard (ACW).
Enabling Calibration will check installation alignment and adjust
apertures for ambient light in the area. The ACW guides APOGEE
owners through any necessary next steps.
APOGEE FIRMWARE UPDATE - Updates APOGEE Launch Monitor
Firmware.
APOGEE REBOOT - Reboots the APOGEE launch monitor.
APOGEE RESET TO DEFAULTS – Resets APOGEE Launch Monitor to its
original factory settings.
USER PREFERENCES
• APOGEE Laser Indicator – Users can enable or disable this feature
• HEY APOGEE Voice Command System– Users can enable or
disable this feature
STATUS – See real-time status of network connections, the camera
system, and the internal temperature of your APOGEE Launch Monitor.
SUPPORT – View and Submit Logs to TruGolf Support Team.
Your contact information will be connected with these reports.
THE APOGEE CONTROL CENTER (ACC)

GET ACQUAINTED
WITH APOGEE
11
“HEY APOGEE” VOICE COMMAND system can be enabled or
disabled inside the ACC. This proprietary voice command system has
been designed to help increase the speed and convenience of your indoor
golf round. The system is activated upon hearing “HEY APOGEE.”
APOGEE LASER INDICATOR can be enabled or disabled inside the ACC.
This visual aid shows users appropriate places to tee the ball for the most
accurate readings.
TEE BOX is the acceptable hitting area where users can place
the ball - Tee Box measures 10” W x 8” D.
SYSTEM STATUS INDICATOR (SSI) - This is the LED Indicator located
on the front of the APOGEE Launch Monitor.
• Blue – Unit is Operational
• Yellow – Calibration in Progress
• Red – User should launch APOGEE Control Center
to check STATUS AND SUPPORT for diagnosis
SYSTEM CONNECTION INDICATOR (SCI) – This is the LED Indicator inside
the APOGEE Text on the face plate of the APOGEE Launch Monitor.
• Orange – System Booting
• Yellow – Searching for Connection
• White – Connected to APOGEE Control Center
• Purple – Calibration in Progress
• Blue – Connected to E6 CONNECT
• Red – Issue Found. Users should launch APOGEE Control
Center to check STATUS AND SUPPORT for diagnosis

GET ACQUAINTED
WITH APOGEE
12
CENTER CAMERA
This is the camera in the center of the APOGEE Launch Monitor.
OFFSET CAMERA
This is the camera offset from the center of the APOGEE Launch Monitor.
MICROPHONE
The Microphone is located in the center of the APOGEE Launch Monitor.
NOTES
APOGEE requires one of these compatible turf types for the TEE BOX
• TruGolf Hitting Mat
• Country Club Elite
• For additional compatible Turf Solutions, please contact your Sales
Representative
APOGEE is powered by E6 CONNECT
The Minimum System Requirements are:
• Intel i5 Processor
• 8GB RAM
• Nvidia 1070
• 25GB of Hard Drive Space
• Windows 10 64-Bit
• Internet Connection

“HEY APOGEE”
VOICE COMMANDS
13
COMMAND KEYWORDS
Activate Voice Commands • Hey APOGEE
Cancel Voice Command • Cancel
Resume Play • Resume
Confirmation - Yes • Yes
• Yeah
• Yep
Confirmation - No • No
• Nope
Show Club Select Menu • Club Menu
• Club Select
Club Options • Auto Select
• Driver
• Three Wood
• Five Wood
• Four Hybrid
• Four Iron
• Five Iron
• Six Iron
• Seven Iron
• Eight Iron
• Nine Iron
• Pitching Wedge
• Sand Wedge
• Putter
Mulligan • Mulligan
• Confirmation

“HEY APOGEE”
VOICE COMMANDS
14
COMMAND KEYWORDS
Next Hole • Next Hole
• Confirmation
Show Analyzer • Analyzer
Show Scorecard • Scorecard
Rehit • Rehit
• Confirmation
Hole Preview • Hole Preview
Pickup • Pickup
• Confirmation
Practice • Practice
Change Camera Aim • Aim Right
• Aim Left
• Reset Aim
• Aim at Pin
Toggle Weather • Weather
Toggle Top View • Top View

APOGEE Control Center (ACC)
15
APOGEE Control Center Is a standalone software to help
owners manage their APOGEE Launch Monitor. The system includes diag-
nostic and automated calibration features to make identifying and solving
any technical problems simple.
CALIBRATION
Launches the Automated Calibration Wizard (ACW). Enabling
Calibration will check installation alignment and adjust apertures for
ambient light in the area. The ACW guides APOGEE owners through any
necessary next steps.
STATUS
See real-time status of network connections, the camera system,
and the internal temperature of your APOGEE Launch Monitor.
TOOLS
Manage APOGEE updates and personal preferences.
SUPPORT
View and Submit Logs to TruGolf Support Team.
Your contact information will be connected with these reports.
DOCUMENTATION
Collection of APOGEE documentation

APOGEE Control Center (ACC)
STATUS
16
NETWORKING SYSTEM
• Internet Connection - connected/disconnected
• APOGEE Connection - connected/disconnected
CAMERA SYSTEM
• Center Camera- Online/offline status
• Offset Camera- Online/offline status
• Cooling System Fan 1 and Fan 2- Online/offline status
• Temperature- Lists the live internal temperature of the
APOGEE device

APOGEE Control Center (ACC)
TOOLS
17
SYSTEM TOOLS
• APOGEE FIRMWARE UPDATE-
Allows the user to update
to the newest version of
APOGEE firmware or revert
to previous firmware version
• APOGEE REBOOT- Reboots
the APOGEE device
• APOGEE RESET TO DEFAULTS- Resets APOGEE’s
calibration settings to factory defaults
SYSTEM CONTROLS
• Tee Laser- Turn the Laser off/on
• Microphone- Turn the Microphone off/on