Truvox International OB38200 User manual

1
Userinstructions
Orbis–OB38200, OB38400, OB45200,
OB45400, OB50200, OB50400,
OBLP452/400
Rotaryfloorcleaning machines
03-6120-0000 Iss.203/10
CAUTION
–
READTHESEINSTRU
CTIONS BEFOREUSINGTHEMACHINE
ORIGINALINSTRUCTIONS

2

3
Contents
Diagrams...........................................................................................................................................4
1Product Information....................................................................................................................5
1.1 Important SafetyAdvice...................................................................................................5
1.2 Guidelinesforthe operator...............................................................................................5
1.3 Transporting the machine................................................................................................6
1.4 Symbols&Markings........................................................................................................6
2Preparing foruse.......................................................................................................................6
2.1Electricalconnection........................................................................................................6
3Preparing foruse.......................................................................................................................7
3.1 Fittingthe handle.............................................................................................................7
4Controls.....................................................................................................................................7
5Fitting abrushordrivediscand pads.........................................................................................7
6Adjusting thehandleheight........................................................................................................7
7Operation...................................................................................................................................7
7.1 Starting the machine........................................................................................................7
7.2 Polishing..........................................................................................................................8
7.3 Scrubbing and Shampooing.............................................................................................8
7.4 Fittingthe solution tank....................................................................................................8
7.5 Removing the solution tank..............................................................................................8
7.6 The vacuumunit..............................................................................................................8
7.7 Fittingthe vacuumskirt....................................................................................................8
7.8 Fittingthe vacuumunit.....................................................................................................9
7.9 Using the vacuumunit.....................................................................................................9
8Storage......................................................................................................................................9
9Maintenance..............................................................................................................................9
10 AfterSalesService....................................................................................................................9
11 Guarantee...............................................................................................................................10
12 WasteElectrical &ElectronicEquipment (WEEE)....................................................................10
13 Technicalspecification.............................................................................................................11
14 Accessories.............................................................................................................................12
15 Faultdiagnosis.........................................................................................................................12
16 Declaration ofConformity.........................................................................................................14

4
Diagrams

5
IMPORTANT
BEFOREUSEREADTHESEINSTRUCTIONSAND RETAINFORFUTUREREFERENCE
1ProductInformation
Thesecommercialfloortreatmentmachinesare
designed forthe scrubbing and polishing orhard
floorsand/orshampooing ofcarpetsinindoor
areas.
Thismachine mustonlybe used forthe
manufacturer’sapproved application.Donot
use the machine whereitissuspected thatthe
carpet, floororupholstery containshealth
endangering dustordebrissuchasasbestosor
chemicalwaste.Ifthisissuspected do not
proceed,contactyoursupervisor,supplieror
TruvoxInternationalforadvice.
The following instructionscontainimportant
information aboutthe machine and safetyadvice
forthe operator.
Equipmentmustbe operated,serviced and
maintained inaccordancewiththe
manufacturer’sinstructions.Ifin doubtcontact
thesupplier ofyourmachine.
NOTE -Toprotectthe machine frompossible
damage during transit, the machine baseand
handlearepacked seperately.Ensurethatboth
itemsarepresent and followthe simpleassembly
instructionstobring the machine intoservice.
Theseinstructionsarevalidforthe following
models:
OB38200, OB38400,OB45200, OB45400,
OB50200, OB50400,OBLP452/400
1.1ImportantSafetyAdvice
When using electrical equipmentbasicsafety
precautionsshouldbe followed including the
following.
•Read allinstructionscarefullybeforeuse.
•Thisapplianceissuitableforcommercialuse,
forexampleinhotels,schools,hospitals,
factories,shops,offices,rentalbusinessesand
otherthan normal housekeeping purposes.
•Thismachine isnotintended foruseby
persons(including children)withreduced
physical,sensory ormentalcapabilities,orlack
ofexperienceand knowledge,unlessthey
havebeen given supervision orinstruction
concerning useofthe machine byaperson
responsiblefortheirsafety.
•Keep children and unauthorised personsaway
fromthe machinewhen inuse.
•Beforeusing the appliance,check thatthe
mainspowervoltage correspondswiththe
voltage shownon the rating plate.
•Allpartsaretobe positioned asindicated inthe
instructionsbeforeusing the machine.
•Do not operatethe machine ifitmalfunctionsor
isdamaged inanyway.Contactan authorised
serviceagent forrepairoradjustment.
•Do notoperateswitchesortouchthe mains
plug withwethandsasthismaycauseelectric
shock.
•Whenunplugging pulltheplug,notthe supply
cord.
•Do notpull orcarry bycord,usecordasa
handle,closeadooron cord,orpullaround
sharpedgesorcorners.
•Keep hair,looseclothing,fingersand allparts
of bodyawayfromopeningsand moving parts.
•Keep cordawayfromheated surfaces.
•Do not usewherehazardousdust ispresent.
•Do not useinan explosiveatmosphere.
•Do not pickup oilorotherflammablematerial.
•Do not usetopickup moistureoranyliquids.
•Do notleavethe machine connected tothe
electricitysupplywhen notinuse,always
removethe plug fromthe socket-outlet.
•Switchoffthe machine beforeremoving the
plug.
•The powersupplycordmustberegularly
inspected forsignsofdamage.Ifthe power
supplycordisdamaged,itshall onlybe
replaced bythe manufacturer,itsserviceagent
orasimilarqualified person inordertoavoida
hazard.
•Onlyreplacethe supplycordwiththe type
specified intheinstruction manual.
•Do notoperatethe machine withadamaged
supplycordorplug,orafterthe machine
malfunctionsorisdamaged inanyway.
Contactan authorised ServiceAgentforrepair
oradjustment.
•The plug ofthe powersupplycordmustbe
removed fromthe socket-outletbefore
commencing cleaning ofthe machine or
undertaking maintenanceoperations.
•Do not kinkortwist the powercord.
•Takecarewhen using amachine nearthe top
of stairstoavoidoverbalancing.
WARNING
Keep the powersupplycordclearof
moving partsand/orrotating brushes.
During operation hazardmayoccurwhen
running the machine overthe powersupply
cord.
1.2Guidelines fortheoperator
WARNING
Operatorsmust be fullytrained inthe use
ofthe machine inaccordancewiththese
instructions,abletoperformuser
maintenanceand the correctselection of
accessories.

6
•Operatorsshouldbephysicallycapableto
manoeuvre,transportand operatethe
machine.
•Operatorsshouldbe abletorecogniseunusual
operation ofthe machine and reportany
problems.
•Onlyusethe machine onfirmlevelsurfaces.
•Wearsuitablefootweartoavoidslipping.
•Wearsuitableclothingtokeep dryand warm.
•Wherepossibleimplementjob rotation and
adequaterestperiodstoavoidcontinuoususe
of the samemuscles.
•Let the machine do thework. Gripthe handle
aslightlyaspossible.
•Stand withfeetslightlyaparttomaintaingood
balance.Avoidtwisting the bodymorethan 45
degrees.
•Do not leavemachine running unattended
•Do not smokewhen using the machine.
•Do notputanyobjectsintoopenings.Do not
usewithanyopening blocked:keep free of
dust, debris,hair,oranything thatmayreduce
airflow.
WARNING Thismachine isfordry use
only.
CAUTION -Thismachine isforindoor
useonlyand shouldnotbe used or
stored outdoorsorinwet conditions.
CAUTION -Ifit issuspected thatthereis
hazardousdustorflammablematerials
stop cleaning the area immediatelyand
consult yoursuperior.
WARNING Onlyuseaccessoriesand
sparepartsprovided withthe machine or
thoseapproved bythe manufacturer.
The useofotheraccessoriesmayimpair
the safetyofthe machine.
•Ensurethe machine isswitched off before
adding orchanging accessories.
1.3Transportingthemachine
CAUTION –Incorrectlifting techniques
mayresultinpersonalinjury,where
applicabledo notliftlarge and heavy
machineswithout assistance. Weadvisethat the
manual handling regulationsarefollowed.
Pleaserefertothe technicaltablefordetailson
weight ofmachine.
When transporting the machine ensurethatall
components,tanksand removablepartsare
securelyfastened,and thatthe supplycordand
plug arenot trailing. Detachhoseand wandfrom
machine whereapplicable.
Whentransporting themachine the handle
shouldbe locked inthe upright position.
Takeextremecarewhen moving the machine up
ordownstepsorstairs.
1.4Symbols&Markings
WARNING
WARNING –READTHESE
INSTRUCTIONSBEFORE
USINGMACHINE
Earth symbol
2Preparing foruse
2.1Electrical connection
Beforeconnecting the machine tothe power
supply,check thatyoursupplyvoltage
correspondswiththatmarked on the ratinglabel.
The powersupplycordplusanyextension leads
shouldnotexceed 30mintotal,otherwiseyou
mayexperienceproblemsstarting up the
machine.The cross-section ofanyextension
cablewiring must be atleast 2,5mm².
Shouldan extension cordbe used,ensurecord
rating isadequateforthe equipment.Do notuse
extension cordincoiled condition asthiscould
result inoverheating of the cord.
UK only
The supplycordfor230vmodelsisfitted witha
plug containing a13 ampfuse.Shouldthe fuse
requirereplacementit must onlybe replaced bya
13 ampfuseconforming toBS1362,and the fuse
covermust be refitted. Ifthe fusecoverislost the
plug mustnotbe useduntil the correct
replacement coverisfitted.
IMPORTANT -Ifthe supplycordisdamaged,it
must onlybe replaced byaspecialcordavailable
fromthe manufactureroran authorised service
agent.
WARNING –THISAPPLIANCEMUST
BEEARTHED

7
3Preparing foruse
3.1Fitting thehandle
1 Carefullyremovethe machine baseand
handlefromtheirrespectivepackaging.
2 Check thatthe following itemsarepresent
withthe base:-
-M8x70 Bolt(3)
-NylocHex.nut (3)
-Plainwasher(6)
-13mmA/FSpanner(2)
3 Takehandleand checkthat‘O’ringson
eitherside of the knucklepivot areseated in
theirgrooves, and thatthe datummarkon
the pivot gearisaligned withthe handletube.
Ifthisisnot the case, raisethe handle
adjustmentleverand rotatethe pivotgear
untilthedatummarkisinline withthe handle
tube, and releasethe adjustmentlever.
4 Withthe handleheldverticallyand cable
windertothe rear,lowerpivot between the
raised flangeson the machine base.
5 Align holesinpivot withthoseon baseand fit
the three M8bolts, washersand nuts, and
tighten using the spannerssupplied (Fig.1).
6 Connect supplylead fromhandletosocket
on motorhousing.
4Controls
The operating controlsforallmodelsarelocated
on the handle(Fig2).
1-Switch trigger,lefthand
Used toswitchmotorONand OFF. Can only
be operated withhandleinworking position,
and ifleft hand interlock button (2)has
previouslybeen depressed
2-Interlock button,lefthand
Thismustbe depressed initiallytoenableleft
hand switchtriggertoswitchmotoron.
3-Switch trigger,righthand
Used toswitchmotorONand OFF. Can only
be operated withhandleinworking position,
and ifrighthand interlock button (4)has
previouslybeen depressed.
4-Interlock button,righthand
Thismustbe depressed initiallytoenable
right hand switchtriggertoswitchmotoron.
5-Handleadjustmentlever
Usedtoadjusthandletocomfortableworking
height. Note: Forsafetyreasonsthe machine
cannotbe operated unlessthe handleis
moved toaworking height.
6-Solutionfeedlever
Operatesflowvalveinsolution tank(iffitted).
-Pull levertoreleasesolution.
-Releaselevertostop flow.
7-Socketconnector
Connection point forvacuumunitlead.
Drive plate
Attachmentpointforbrushordrivediscand
pad.
Cablewinder
Used toholdsupplycordinplaceon handle
whenmachine isnot inuse. Canbeturned to
enablequick releaseofcord.
Motoroverloadcut-out
Protectsmotorfromoverload and possible
damage.The cut-outwill resetautomatically
whencooled sufficiently, enabling the motorto
restart.
Neon indicator (on handle)
Lightswhenthe machine isconnected tothe
powersupply.
5Fitting abrushordrive disc andpads
WARNING-Thisappliance has been
designedforuse withthepads
specifiedbythemanufacturer.The
fittingofother padsmay affectits
performance and safety.
Alwaysensuremachine isunplugged before
fitting orremoving parts.
•Adjust handletothe fullyuprightposition.
•Pullhandledownuntilitrestson the floorand
the brushguardisraised.
•Fitthe brush/drivediscontothe driveplateand
rotateit anti-clockwiseuntilsecure.
•Returnmachine toupright position.
•IMPORTANT-Never allowthecleaning
headtorestonthebrushordrive disc and
padwhennotinuse.
6Adjusting thehandleheight
Selectthe mostcomfortablehandleheightusing
the adjustmentleveraspreviouslydescribed (see
Controls)and lockinposition.
7Operation
The normalmovementofamachine inuseis
fromside toside across the floor.Thisis
achievedautomaticallybyraising orlowering the
handlewhilstitisengaged inthe normalworking
position.
Lowering the handletherebyincreasing the
pressureatthe rearofthe brush/drivedisc,
movesthe machine tothe left. Raising the handle
increasing the pressureonthe frontofthe
brush/drivediscmovesthe machine tothe right.
Effectivecleaning and polishing isachieved by
moving the machine ina backwards direction.
Do not leavethe machine standing on abrushor
drivediscand pad when not inuse.
7.1Starting themachine
•Fullyunwind the supplycordfromthe handle
and plug intoaconvenientsocketoutlet. The
neon indicatoron the handleshouldlight
showing that powerisavailable.
•Withthe handlesetataconvenientworking
heightand withbothleftand righthandson the
handle,depressbothinterlock buttonswiththe

8
thumbsand squeezebothswitchtriggersto
start the machine (Fig.3).
WARNING-Neverstartthemachine
withoutpadsfitted.
•Oncethe machine hasstarted the interlock
buttonsshouldbe released.
•Tostop the machine releasebothswitch
triggers.
Orbis452/400 dual speed
The speed selectorswitchon the dualspeed
modelislocated on the motorhousing. Ensure
machine isswitched off beforechanging the
speedsetting.
7.2Polishing
•Fit polishing brushordrivediscand pad
suitableforthe speed of the machine and the
surfacetobepolished. (see Accessories).
•Applypolishtothe floorinaccordancewiththe
manufacturersinstructions.
•Do not keep the machine rotatingon one spot
formorethan 3seconds, asthiscouldcause
overheating and damage the floorsurface.
7.3Scrubbing andShampooing
•Forscrubbing orshampooingthe solution tank
must be fitted asdescribed (see Fitting the
solutiontank).
•Fit abrushordrivediscand pad suitablefor
the surfacetobe cleaned. (see Accessories).
•WARNING -Thisappliance has been
designedforuse with thebrushesspecified
bythemanufacturer.Thefitting ofother
brushes may affectitssafety.
•Fillthe solutiontankwithwaterand an
appropriatemeasureof detergent.
•IMPORTANT -Useonlycleaning agents
suitableforautomaticmachinesi.e.low
foaming,and followthe chemicalmanufactuers’
directionsregarding use, handling,disposal
and healthand safetyprovisions.
•Beforestarting the machine releasealiberal
amount of cleaning solution fromthe tanktothe
floor.The flowofsolution fromthe tankis
controlled bymoving the lefthand lever.
Releasing the leverstopsthe flow.
•Proceed tooperatethemachineinthe normal
manner,releasing morecleaning solutionfrom
timetotimeasrequired.
•Do not keep the machine rotatingon one spot
formorethan 3seconds, asthiscouldcause
overheating and damage the floorsurface.
•Dirtywatershouldnot be allowed to
accumulateon the floor, it shouldbe removed
toprevent dirt fromsettling. Wesuggest using
asuction dryerforthispurpose.
•Whenscrubbing/shampooing iscomplete,
unplug the machine fromthe powersupply,
emptythe solution tankand clean and dry the
machine.
•IMPORTANT -Disposeofunused cleaning
solution inaccordancewiththe manufacturer’s
directions.
7.4Fitting thesolutiontank
NOTE- The solution tankissupplied asan
accessory item, completewithattachmentsand
fitting instructions.
•Movethe handletotheuprightposition and
clampthe tanksupport brackettothe handle
tube inthe specified position (Fig.4). (Referto
the instructionssupplied withthe tank).
•Takethe solution tankand pass the ring on the
tankchainoverthe left hand operating lever
and locatethe ring inthe inside slot on the top
of the lever.Rest the solution tankon the
support bracket withthe handletube inthe
grooveon the back of the tank.
•Tosecurethe tankinposition,engage the
locking baron theback of the tank.
•Adjust the lengthof the chainbymeansof the
screwand nut adjustertoensurethereisno
tension on the chainwhen the flowcontrol lever
isnot being used.
•Takethe plastictube supplied and pushrigid
end of tube intothe connectoron the underside
of the solution tank, and theotherend ontothe
tube at therearof the motorhousing. Thetank
connectorisofthe sealed lock-intype oncethe
tube isconnected.Torelease, pressdownon
the orange collarof the connectorwiththe
fingertipsand pullouttube.
7.5Removing thesolutiontank
•Pulloff plastictube frommachine base.
•Raiselocking baron back of tank.
•Liftoff tankand detachchainring fromlever.
7.6Thevacuumunit
NOTE- The vacuumunitand vacuumskirt are
supplied asaccessory items, completewith
attachmentsand fitting instructions.The vacuum
unit combined withthe vacuumskirtprovidesfull
dust control, eliminating the need topre-dust or
post dust the floor.The unitisdesigned tofit
readilytoallOrbismodels.
IMPORTANT -ThevacuumunitisNOT
suitableforanyform ofwetcleaning.
7.7Fitting thevacuumskirt
•Unplug and laythe machine downwiththe
handlebarresting on the floor.Removethe
brushordrivedisc.
•Stretchand fitthe rubberbufferaround the
brushguard.
•The flexiblesection ofthe skirt hasaspecial
spring sewnintothe fabric.Fit thisspring
section intothe grooveinthe rubberbuffer.

9
•The spring isareasonablytightfittoprevent
accidental movement inuseand thereforemust
be pulled ontothe bufferbystretching.
•Withthe skirton the bufferitcan be moved in
itsgroovetobring the hoseconnectortothe
rear, ensuring the basemoulding liesinthe cut-
out provided inthe outerring of the skirt,
enabling freemovement when inuse(Fig.5).
7.8Fitting thevacuumunit
•Stand machineupright, and clampthe vacuum
unit support brackettothe handletube inthe
specified position. (Refertothe instructions
supplied withthe unit).
•Rest the vacuumunit on the support bracket
withthe controlswitchtothe rear,and engage
the locking baronthe back ofthe unit tosecure
itinposition.
•Pushthe flexiblehoseon tothe vacuumunit
and skirt.
•Plug theelectrical lead fromthe vacuumunit
intothe socket situated on the leftside ofthe
handlemoulding.
•The machine isnowreadyforuse. The switch
controllingthe vacuumunit islocated on the
back ofthe unit.The OFF position ismarked O.
7.9Usingthevacuumunit
IMPORTANT -Formaximumsuctionthe
sliding shutter on thetopoftheunitmustbe
closed.
•Dust collected bythe unitiscontained within
the filterbag located behindthe front cover.
•Toreplacethe filterbag, switchoff vacuum
unit,releasefrontcovercatchand liftoff
cover.
•Removeand disposeofused bag. Fit new
bag and replacefrontcover.
8Storage
•Alwaysunplug the machine afteruse.
•Wrap the supplycordaround the handlebar
and cablewinderensuring thatthe plug isnot
trailing on the floor.
•The machine shouldnormallybe stored with
the handleinthe fullyuprightposition.
•Neverstorethe machine withabrushordrive
discand pad fitted asthiscausesdistortion,
and resultsininstabilityduring operation.
•Storethe machine inadry indoorarea only.
9Maintenance
WARNING-Before undertaking
maintenance operationsor
adjustmentsswitchoff machineand
unplugfromtheelectricitysupply.
The machine requiresminimummaintenance
apartfromthe following checksbyatrained
operator.
•Supplycord -Regularlyinspectsheath,plug
and cordanchorage fordamage orloose
connection.Onlyreplacethe supplycordwith
the type specified intheseinstructions.
•Solutiontank -Check waterflow,ifrestricted
inspect hosesand tubesforblockage orkinks.
Dismantlecontrol valvetoclean if necessary.
Check switchinterlock forcorrect operation.
•Vacuumunit -Alldust bagsmust be changed
regularlyand hosesand connectorschecked
forblockage toavoidunsatisfactory results.
•Motoroverloadcut-out -All machinesare
fitted withanautomaticresetmotoroverload
cut-out. The cut-out willoperatetoprotectthe
motorfromoverheating byswitching the
machine off when thereisexcessive
friction/resistancetothe cleaning head on the
floor.Thisisusuallycaused bythe stickiness of
the pad orfloor.Turnthe cleaning pad overor
if bothsidesaredirtyreplacewithaclean pad.
It isnot possibletoobtainagood finishon the
floorusing adirtypad.Shouldthe cut-out
operateitwillreset automaticallywhen the
motorhascooled sufficiently, usuallyafter15 -
30 mins.
10 After Sales Service
Truvoxmachinesarehigh qualitymachinesthat
havebeen tested forsafetybyauthorised
technicians. Itisalwaysapparent that afterlonger
working periods,electricaland mechanical
componentswillshowsignsofwearand tearor
ageing.
Underextremeorspecialised conditionsand/or
insufficient maintenance, shortermaintenance
intervalsarenecessary. UseonlyoriginalTruvox
spareparts. Use ofother spare partswill
invalidateall warrantyand liabilityclaims.
Shouldyou requireaftersalesserviceplease
contactthe supplierfromwhomyou purchased
the machine,who will arrange service. Repairs
and servicing of Truvoxproductsshouldonlybe
performedbytrained staff. Improperrepairscan
causeconsiderabledangerstothe user.

10
11 Guarantee
Yourproductisguaranteed for two yearfromthe
dateoforiginalpurchase,orhirepurchase,
againstdefectsinmaterialsorworkmanship
during manufacture.Withinthe guarantee period
weundertakeatourdiscretion,torepairor
replacefreeofcharge tothe purchaser,anypart
found tobe defective,subjecttothe following
conditions.
CONDITIONS
1.Claimsmade underthe termsofthe
guarantee mustbe supported bytheoriginal
invoice/billofsaleissuedatthe timeofsale,
orthe machine Serial Number.
2.Forclaimsunderthisguarantee contactthe
supplierfromwhomyou purchased the
productwhowillarrange the appropriate
action.Do notinitiallyreturnthe productas
thiscouldresultintransit damage.
3.NeitherTruvoxnoritsdistributorsshall be
liableforanyincidental orconsequentialloss.
4.Thisguarantee isgoverned bythe lawsof
England.Thisguarantee doesnotcoverany
ofthe following:Periodicmaintenance,and
repairorreplacementofpartsdue tonormal
wearand tear.
5.Thisguarantee isgoverned bythe lawsof
England.Thisguarantee doesnotcoverany
ofthe following:Periodicmaintenance,and
repairorreplacementofpartsdue tonormal
wearand tear.
•Damage caused byaccident, misuseor
neglect, orthe fitting ofotherthan genuine
Truvoxparts.
•Defectsinotherthan genuine Truvox
parts,orrepairs,modificationsor
adjustmentsperformed byotherthan a
Truvoxserviceengineerorauthorised
serviceagent.
•Costsand risksof transportrelating directlyor
indirectlytothe guarantee of thisproduct.
•Consumableitemsand wearpartssuchas
drivebelts.
Thisguarantee doesnotaffectyourstatutory
rights,noryourrightsagainstthe supplierarising
fromtheirsalesorpurchasecontract.
12 WasteElectrical &ElectronicEquipment
(WEEE) Do not disposeofthisdevicewith
unsorted waste. Improperdisposal
maybe harmfultotheenvironment
and human health.
Pleaserefertoyourlocal waste
authorityforinformation on return
and collection systemsinyourarea.

11
13 Technical specification
Allmodels: 230-240 V ∼50 Hz,Class I construction. EnclosuretoIPX4.Fitted with15msupplycordand 13Afused plug.
Model
Orbis200
38cm
OB38200
Orbis200
43cm
OB45200
Orbis200
50cm
OB50200
Orbis200hd
43cm
OB45200/HD
Orbis400
38cm
OB38400
Orbis400
43cm
OB45400
Orbis400
50cm
OB45400
OrbisDuo
43cm
OB38200
VoltageAC(~)/
Frequency V/ Hz 230 / 50 230 / 50 230 / 50 230 / 50 230 / 50 230 / 50 230 / 50 230 / 50
Pad Diameter cm 38 43 50 43 38 43 50 43
Heightmm 1150 1210 1210 1210 1210 1210 1210 1210
Pad Pressure g/cm²28 22 18 27 28 22 18 27
Speedrpm 190 190 190 190 380 380 380 Lo/hispeed
Motoracinduction
MotorRating W 1100 1100 1100 1100 1100 1100 1100 1100
CableLengthm 15 15 15 15 15 15 15 15
Weightkgs 32 32 32 32 40 32 32 40
Noise LeveldB(A) 53 53 53 53 53 53 53 53
Noise levelwith
vacuum dB(A) 69 69 69 69 69 69 69 69
Handle
vibration m/s²<2,5 <2,5<2,5<2,5<2,5<2,5<2,5<2,5
Warranty2years
1 Noiselevelsmeasured at adistanceof 0.25 metrefrommachine and 1.5metresabovefloor,when scrubbing ahardfloor. Measurementsrecorded using
ahand heldmeter.
2 Handlevibration doesnot exceed 2,5m/s², when operating on anysurfacewithbrushorpads.
Measurementsrecorded byan independent testlaboratory

12
14 Accessories
Item PartNo. Usage
Polypropylene scrubbing brush03-3431-0000
wet scrubbing
Tynexscrubbing brush03-3432-0000
heavydutywet scrubbing
Shampoo brush03-3433-0000
carpet cleaning
Bassine polishing brush03-3434-0000
polishing and spraycleaning
Gumatipolishing brush05-3435-0000
polishing and spraycleaning
Standarddrivedisc(see note1)
05-3436-0000
retainscleaning pads
Flexi-drivedisc05-3437-0000
retainscleaning pads
Solution tank05-3438-0000
scrubbing/shampooing
Anti-splashwaterskirt05-3439-0000
preventssplashing whenwet scrubbing
Vacuumunitand hose05-3440-0000
dust extraction
Vacuumskirt05-3441-0000
dust extraction
Paperfilterbags(10 pack) 02-3526-0000
dust collection
1-Suitablefor45cm200 machine only.
IMPORTANT:Genuine accessoriesareonlyavailablefromauthorised ServiceAgentsorTruvox
CustomerServicesDepartment
15 Faultdiagnosis
WARNING -Before undertakingmaintenanceoperationsoradjustmentsswitchoff
machineandunplugfromtheelectricitysupply.
The following simplechecksmaybeperformed bythe operator.
Trouble Reason Remedy
Machine not working,neon
indicatornotlit. Lack ofvoltage/electrical supply. Check fuse*, supplycord, plug and socket outlet.
Machine not working,neon
indicatorlit. Switchinterlockincorrectly operated.
Looseoverload cut-out
operated.
Check operating procedurein
instructions.
Check brush/pad forgood
condition
Check correctliquidtype and
quantity.
Check liquiddilution.
Allowmotortocool.
Machine wobblesorvibrates
excessively. Pad wornordamaged
Pad dirty
Pad loose
Renewpad
Clean the pad
Tighten pad lock
*Ifthe fuseblowsseveral times, themachineshouldbe checked byan authorised ServiceAgent.

13

14
16 DeclarationofConformity
ECDeclarationofConformity
We,TruvoxInternationalLtd.
of ThirdAvenue, Millbrook,
Southampton, Hampshire
England
SO15 0LE
declarethatthe machinery
Make:Rotary floorcleaning machines
Type :OrbisRotaries
Model:OB38200…, OB38400…,OB45200…,OB45400…,
OB50200…, OB50400…,OBLP452/400…
Serial Number:from000001
YearofConstruction :2010
hasbeen manufactured using the following transposed harmonised European Standardsand
technicalspecifications.
Ref No Title
2006/42/ECMachinery Directiveand subsequent amendments
2006/95/ECThe LowVoltage Directiveand subsequent amendments
BS EN60335-1
BS EN60335-2-67
2004/108/ECThe EMCDirectiveand subsequent amendments
EN61000-3-2
EN61000-3-3
EN55014-1
EN55014-2
Signed in:SOUTHAMPTON,England
on the 29th dayof December2009
Signature:
Name:David Overell Technicalfile:Orbis200, 400, Duo Iss. 1
Position :Managing DirectorMark Campbell
Product SupportManager

15

16
TruvoxInternationalLimited
ThirdAvenue, Millbrook, Southampton, HampshireSO15 0LE, England
Tel:[phone] Fax:[phone]
e-mail:[e-mail]:www.truvox.com
Authoriseddealer: