Truweigh CLASSIC CL-100-01 User manual

CLASSIC USER GUIDE

Thanks for purchasing the CLASSIC Digital Mini Scale! This
User Guide is designed to get you up and running quickly
with your scale. Scales are precision instruments and
require proper care and skill to get the best results. If you
have questions or need support, visit us at http://www.
truweigh.com/support or scan the QR Code on the back of
this manual using your smartphone.
What’s In The Box
Key Descriptions
ZERO/TARE - Zero’s the scale. Also
subtracts the weight of an empty
container (see Tare Function).
MODE - Changes the weighing unit.
ON/OFF - Turns the scale ON or OFF.
CLASSIC Digital
Mini Scale
Two AAA
Batteries
User Guide
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps

Weighing Your First Item
1. Press the ON/OFF key
to turn the scale on.
2. Place the item on the
center of the weighing
platform.
3. Take your reading
from the display. You
can press the MODE
key to convert between
weighing units.
4. The scale’s auto-o function will turn the scale o
after 3 minutes of inactivity or you can press the
ON/OFF key to turn the scale o.
Things To Avoid
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps
Unlevel Surfaces
Air Currents
Radio Frequency
Interference
Vibration
High Humidity
Extreme Temps
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps

Tare Function
The Tare function allows you to subtract the weight of a
container so that the display only shows the weight of the
contents.
NOTE: The weight of the container will subtract from
the available capacity and will leave a negative value
on the display once the weight is removed. Press
ZERO/TARE again to return the display to zero.
Accuracy
Your scale comes calibrated from the factory and most
users wont need to calibrate their scale for a long time.
You should check your scale’s accuracy periodically using
calibration weights and perform calibration if necessary.
NOTE: Only use trusted calibration weights.
Household items such as bottles and cans with
weights printed on the side are not suitable for
checking accuracy as these values are approximate
and don’t include the container weight (Net Weight).
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps
Press the ZERO/TARE
key to subtract the
container’s weight.
Add items to the
container to see their
weight on the display.
Place an empty tray
or container on the
platform.
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps

Calibration
Calibration adjustment is permanent and
should only be performed using accurate
calibration weights that match the
requirements for your scale (see the chart on
back). Do not use coins or other household
items to calibrate.
1. Prepare the required weight for your scale. (see
chart on back)
2. Find a at and level surface to perform calibration
and let the scale adjust to room temperature.
3. Press ON/OFF to turn the scale on and wait for the
scale to stabilize.
4. Press and hold the MODE key until the display
shows ‘CAL’.
5. Make sure nothing is on the platform then press
MODE to conrm the zero point.
6. The display will then ash the required calibration
weight.
7. Place the required calibration weight on the center
of the platform.
8. The display will show
‘PASS’ then return
to normal weighing
mode. You may now
turn the scale o or
continue weighing.
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps

Specications
CL-100-01 CL-1000-1
Max Capacity
100 g / 3.527 oz /
3.215 ozt/ 64.30 dwt /
500.00 ct / 1543.2 gn
1000 g / 35.27 oz /
32.15 ozt/ 643 dwt /
5000 ct / 15432 gn
Readability
0.01 g / 0.001 oz /
0.001 ozt / 0.01 dwt /
0.05 ct / 0.2 gn
0.1 g / 0.01 oz / 0.01 ozt
/ 0.1 dwt / 0.5 ct / 2 gn
Weighing
Units g, oz, ozt, dwt, ct, gn
Dimensions
Overall: 5.0 in x 3.0 in x 0.75 in
Platform: 2.5 in x 2.9 in
Display: 0.4 in x 1.2 in
Calibration
Weight 100g 500g
Power 2 x AAA Batteries
Warranty 10 Year Limited Warranty
For more information, including
weighing tips and support, scan
this code with your smartphone
Or visit us online at
truweigh.com/support/