TSI Instruments TSI27PDADVAZZZZ User manual

User Guide
27” LCD Touch Screen Monitor
Model: TSI27PDADVAZZZZ

2 / 36
Table of Contents
User Guide .............................................................................................................................................. 1
1. Introduction ..................................................................................................................................... 3
1.1 Monitor description............................................................................................................. 3
1.2 Package contents ................................................................................................................. 3
1.3 Product overview ................................................................................................................. 4
2. Important information ..................................................................................................................... 7
2.1 Safety information .............................................................................................................. 7
2.2 Environmental information................................................................................................ 10
2.3 Regulatory information...................................................................................................... 11
2.4 Equipment Symbols ........................................................................................................... 12
3. Cleaning the display....................................................................................................................... 14
3.1 Cleaning instructions.......................................................................................................... 14
4. Monitor installation ....................................................................................................................... 15
4.1 Installation procedure........................................................................................................ 15
4.2 Stand removal & VESA mount installation......................................................................... 16
5. Daily operation............................................................................................................................... 19
5.1 Main power switch............................................................................................................. 19
5.2 Power/Status indication..................................................................................................... 19
6. OSD menu operation...................................................................................................................... 20
6.1 On-Screen Display.............................................................................................................. 20
6.2 Menu Descriptions............................................................................................................. 20
6.3 OSD Structure..................................................................................................................... 20
6.4 Main Menu......................................................................................................................... 22
6.4.1 Exit.......................................................................................................................... 22
6.4.2 Auto Setup (Analog Video Only) ............................................................................ 22
6.4.3 Brightness............................................................................................................... 23
6.4.4 Contrast.................................................................................................................. 23
6.4.5 Display (Analog Video Only)................................................................................... 23
6.4.6 Color Mode ............................................................................................................ 24
6.4.7 Clock / Phase (Analog Video Only)......................................................................... 25
6.4.8 Audio...................................................................................................................... 26
6.4.9 Management.......................................................................................................... 27
6.4.9.1 Scaling .................................................................................................................... 27
6.4.9.2 OSD Display............................................................................................................ 27
6.4.9.3 Language ................................................................................................................ 28
6.4.9.4 Source .................................................................................................................... 28
6.4.9.5 Power Key Lock ...................................................................................................... 29
6.4.9.6 Recall ...................................................................................................................... 30
6.4.10 Operating Hours..................................................................................................... 30
6.5 Supported Video Modes .................................................................................................... 31
7. Technical Specifications.................................................................................................................. 32
8. Outline Dimension ......................................................................................................................... 34

3 / 36
1. Introduction
1.1 Monitor description
The equipment is intended for general use in commercial environment for human-machine
interface (HMI) and display for reference. It was designed with high resolution, operational
safety, and long service life in mind.
1.2 Package contents
⚫27” LCD Touch Screen Monitor
⚫Power Adapter (12V)
⚫AC Power Cord
⚫VGA Cable
⚫HDMI Cable
⚫DP Cable
⚫USB Cable
⚫Stand

4 / 36
1.3 Product overview
Front View
The image below shows the front view of the display.
Image 1-1 Front view
1. PCAP touch screen
2. Bezel
3. LED
1
3
2

5 / 36
Side View
The image below shows the control key located in the right bottom corner
of the display.
4
Image 1-2 Control
Key
1. Menu/Enter key / Scrolling key
1

6 / 36
Rear View
Image 1-3 Rear view
1. Rear cover
2. IO cover
3. Monitor stand
4. Hinge cover
1
3
4
4
2
2

7 / 36
2. Important information
2.1 Safety information
General recommendations
Read the safety and operating instructions before operating the device.
Save the safety and
operating instructions for future reference.
Adhere to all warnings on the device and in the operating instructions manual. Follow all
instructions for operation and use.
Electrical Shock or Fire Hazard
To prevent an electrical shock or fire hazard, do not remove the cover.
No serviceable parts are inside. Refer servicing to qualified personnel.
Do not expose this
apparatus to rain or moisture.
Modifications to the unit:
Do not modify this equipment without authorization of the manufacturer.
Type of protection (electrical):
Monitor with internal power supply: Class III equipment.
Degree of safety (flammable anesthetic mixture):
Equipment is not suitable for use in the presence of a flammable anesthetic mixture of air,
oxygen
, or nitrous oxide.
Mission critical applications
We strongly recommend for there to be a replacement monitor immediately available in
mission critical applications.
Power connection –Equipment with external power supply
Power requirements: The equipment must be powered by the DC mains voltage.
Transient over-voltage
To fully disengage the power to the device, please disconnect the power cord from the AC inlet.

8 / 36
Power cords:
Do not overload wall outlets and extension cords as this may result in fire or electric shock.
Main leads protection (U.S.: Power cord): Power cords should be routed so that they are not
walked upon or pinched by items placed upon or against them. Pay particular attention to
cords at plugs and receptacles.
The power supply cord should be replaced by the designated operator only at all times.
Use a power cord that matches the voltage of the power outlet, which should be approved
and in compliance with the safety standard of your particular country.
Avoid placing the monitor near places that is hard to reach or difficult to disconnect the
power supply cord.
“WARNING: To avoid risk of electric shock, this equipment must only be connected to a
main supply with protective ground”
•"AVERTISSEMENT : Pour éviter tout risque d'électrocution, cet équipement ne doit être connecté
qu'à une alimentation principale avec mise à la terre de protection"
Grounding reliability
Grounding reliability can only be achieved when the equipment is connected to an equivalent
receptacle.
Liquids and moisture
Never expose the monitor to liquids or moisture.
Never use the monitor near water - e.g. near a bathtub, washbasin, swimming pool, kitchen
sink, laundry tub or in a wet basement.
Ventilation
Do not cover or block any ventilation openings in the cover of the set. When installing the device
in a cupboard or another closed location, heed the necessary space between the set and the
sides of the cupboard.
Installation
Place the device on a flat, solid, and stable surface that can support the weight of at least 3
devices. If you use an unstable cart or stand, the device may fall, causing serious injury to a child
or adult, and serious damage to the device.

9 / 36
WARNING
1. The power cable connector is the primary means of detaching the system from the power
supply. The monitor should be installed close to a power outlet, which is easily accessible.
2. AC power inlet is considered as Disconnect Device.
3. To prevent fire or shock hazards, do not expose this unit to rain or moisture. Also, do not use
this unit’s polarized plug with an extension cord receptacle or other outlets unless the prongs
can be fully inserted.
4. To prevent the risk of electric shock, make sure the power cord is fully disengaged from the
power socket of the unit. Please disconnect the power cord from the AC outlet.
5. The power cord shell must be connected to an outlet with ground connection.
6. CAUTION: Double pole, neutral fusing. Disconnect mains before servicing. Please refer to
manufacturer for any service needs.
AVERTISSEMENTP
1. Le connecteur du câble d'alimentation est le principal moyen de débrancher le système de
l'alimentation. Le moniteur doit être installé à proximité d'une prise de courant facilement accessible.
2. L'entrée d'alimentation CA est considérée comme un dispositif de déconnexion.
3. Pour éviter tout risque d'incendie ou d'électrocution, n'exposez pas cet appareil à la pluie ou à
l'humidité. De plus, n'utilisez pas la fiche polarisée de cet appareil avec une prise de rallonge ou
d'autres prises à moins que les broches ne puissent être complètement insérées.
4. Pour éviter tout risque d'électrocution, assurez-vous que le cordon d'alimentation est complètement
débranché de la prise de courant de l'appareil. Veuillez débrancher le cordon d'alimentation de la
prise secteur.
5. La coque du cordon d'alimentation doit être connectée à une prise mise à la terre.
6. ATTENTION : Fusible bipolaire, neutre. Débranchez le secteur avant l'entretien. Veuillez vous référer
au fabricant pour tout besoin de service.

10 / 36
2.2 Environmental information
Disposal Information
Waste Electrical and Electronic Equipment
This symbol on the product indicates that under the European Directive 2012/19/EU,
governing waste from electrical and electronic equipment, this product must not be disposed
of with other municipal waste. Please dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and electronic equipment. To
prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources.
For more information about recycling of this product, please contact your local city office or
your municipal waste disposal service.
RoHS
EU Directive 2011/65/EC and 2015/863/EU.
On the restriction of certain hazardous substances in electrical and electronic equipment.
This product is RoHS compliant.

11 / 36
2.3 Regulatory information
FCC class B
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful
interference in a residential installation. This device generates
uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this device does
cause harmful interference to radio or television reception, which can be
determined by
turning the device off and on, the user is encouraged to try to correct the interference by
one
or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device to an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could
void the
user’s authority to operate the equipment.
Canadian notice
This ISM device complies with Canadian ICES-003.
Cet appareil ISM est conforme à la norme NMB-003du Canada.

12 / 36
2.4 EquipmentSymbols
Electrical and electronic equipment symbols
Indicates the device meets the requirements of the applicable CE directives.
Indique que l'appareil répond aux exigences des directives CE applicables.
Indicates compliance with Part 15 of the FCC rules (Class A or Class B)
Indique la conformité à la partie 15 des règles de la FCC (classe A ou classe
B)
Indicates the device is approved according to the TUV regulations for Canada
and US.
Indique que l'appareil est approuvé conformément aux réglementations TUV
pour le Canada et les États-Unis.
Indicates the USB connectors on the device
Indique les connecteurs USB sur l'appareil
Indicates the Display Port connectors on the device
Indique les connecteurs Display Port sur l'appareil
Indicates the legal manufacturer
Indique le fabricant légal
Indicates the manufacturing date
Indique la date de fabrication
Indicates the temperature limitations for the device to safely
operate within specs.
Indique les limites de température pour que l'appareil puisse
fonctionner dans les spécifications.
Indicates the device serial number
Indique le numéro de série de l'appareil
Indicates the device part number or catalog number
Indique le numéro de pièce ou le numéro de catalogue de l'appareil
Warning: dangerous voltage
Attention : tension dangereuse
Caution
Mise en garde

13 / 36
Indicates this device must not be thrown in the trash but must be recycled,
according to the European WEEE (Waste Electrical and Electronic
Equipment) directive
Indique que cet appareil ne doit pas être jeté à la poubelle mais doit être
recyclé, conformément à la directive européenne DEEE (Déchets
d'équipements électriques et électroniques)
Indicates Direct Current (DC)
Indique le courant continu (DC)
Indicates Alternating Current (AC)
Indique le courant alternatif (AC)
Stand-by
Etre prêt
Power ON. Power connection to the mains
Allumer. Raccordement électrique au secteur
Power OFF
Éteindre
Protective earth (ground)
Terre de protection (masse)

14 / 36
3. Cleaning the display
3.1 Cleaning instructions
To clean the display
Cleaning the display using a sponge, soft clean cloth, or soft tissue with lightly moistened
recognized cleaning product for the equipment. Read and follow all labeled instructions
on the cleaning product. In case of doubt about a certain cleaning product, use plain
water.
CAUTION:
• Take care not to damage or scratch the front glass or LCD. Be careful with
rings or other jewelry and do not apply excessive pressure on the front glass or
LCD.
•Do not apply or spray liquid directly to the display as excess liquid may cause
damage to internal electronics. Instead, apply the liquid to a cleaning sponge,
cloth, or tissue.
ATTENTION :
•Veillez à ne pas endommager ou rayer la vitre avant ou l'écran LCD. Soyez
prudent lorsque vous portez des bagues ou autres bijoux et n'appliquez pas
une pression excessive sur le verre avant ou l'écran LCD.
•N'appliquez ou ne vaporisez pas de liquide directement sur l'écran car l'excès de
liquide peut endommager l'électronique interne. Appliquez plutôt le liquide sur
une éponge, un chiffon ou un mouchoir en papier.

15 / 36
4. Monitor installation
WARNING: Sufficient expertise is required to install this equipment. All devices
and complete setup must be tested before operation.
AVERTISSEMENT : Une expertise suffisante est requise pour l'installation de cet
équipement. Tous les appareils et la configuration complète doivent être testés
avant d'être mis en service.
4.1 Installation procedure
To install your monitor
To get access to the connectors, put the display on a flat surface.
1. Connect one or more video source(s) to the corresponding video inputs of the monitor.
Use the appropriate video cable(s) to do this.
2. Connect the USB or RS232 connector for touch screen function.
3. Connect the Audio cable for audio function.
4. Connect the power cord input to a power adapter with a grounded Power Outlet.
5. Connect the power adapter input to the monitor.
6. Install cable cover back on the monitor.
Available Connections
Available connections (bottom view)
No
Name
Connection Type
Remarks
1
USB TOUCH
USB type-B
Touch screen signal output
2
RS232 Input
9 pin Serial
RS232 serial communication for touch only
3
LINE IN
3.5mm stereo phone jack
Audio signal input
4
Power Input
4 pin power socket
Power from included External Power Adapter
5
DP
DisplayPort
DisplayPort signal input
6
HDMI
HDMI
HDMI signal input
7
VGA
D-Sub 15
VGA signal input
1
1
4
5
3
3
6
2
7

16 / 36
4.2 Stand removal & VESA mount installation
This monitor provided with a validated stand. The monitor has been designed to be used in
landscape position with a maximum tilt of -5° forward to 30° backward. If a different stand is
needed in the final application, the monitor VESA interface (VESA 100 mm standard) could be
used.
To remove the stand and install the VESA mount
1. Place the monitor face down on a flat, solid and stable surface.
2. Remove the hinge cover
3. Unscrew the 4x M4 (length: 10mm) screws fixing the stand and rear cover
4. Remove the stand and install the VESA mount.
Caution: Use a protective cloth or soft cushion to avoid damaging or scratching the monitor
and LCD screen.
Attention : Utilisez un chiffon de protection ou un coussin doux pour éviter d'endommager
ou de rayer le moniteur et l'écran LCD.
Tip: Store the fixation screws at a known place for possible future use.
Image 4-2-1 Remove the hinge cover

17 / 36
Image 4-2-2 Remove the 4x M4 screws
Image 4-2-3 Remove the stand from the monitor

18 / 36
5. Attach the monitor in landscape position to a 100 mm VESA mounting bracket. If monitor is
placed in Portrait position, the OSD Menu cannot be rotated.
Image 4-2-4 VESA mount is located at the back of the monitor.

19 / 36
5. Daily operation
5.1 Main powerswitch
The monitor is switched on or off with the main switch, see image 1-2 Control key.
5.2 Power/Status indication
During start-up the monitor performs signal detection before going into normal operation
mode. Depending on the detection result, the status LED on the side of the monitor will show
different LED color.
Below is an overview of the possible status LED modes:
LED Color
Status LED modes
Operation Description
OFF (No LED)
OFF mode
Monitor is not powered.
Green, static
Normal mode
Monitor is ON, video sync OK.
Orange, static
Stand-by mode
(Power saving)
Automatically enters power saving and standing by
for input signal

20 / 36
MAIN MENU
Exit
Auto Setup
Brightness
Contrast
Display
Color Mode
Clock/Phase
Audio
Management
Operating Hours
0-100
0-100
6. OSD menu operation
The Charts displays the function tree and brief explanations of the functions. Color, OSD, and other
adjustments have submenus under each tree.
6.1 On-Screen Display
The LCD monitor features an On-Screen Display (OSD) menu with easily identifiable icons designed
to make adjustment of your monitor display settings a more user-friendly process. When
highlighted, the icon illustrates the control function and brief instruction to assist the user in
identifying which control needs adjustment.
The OSD menu is activated by pressing the Control Dial inward and you can select and adjust the
function of your choice by rotating and clicking the Control Dial. The main menu displays a list of sub
menu icons and the current video input mode. Rotate the dial to move the highlights to the control
you would like to adjust, then press the Control Dial inward to select that control or to activate that
function. Depending on the control you selected, a submenu of the control with a status bar will
appear. The status bar indicates in which direction, from the factory preset; your adjustments are
being made. Rotate the Control Dial to adjust the control.
When you have finished making the adjustments, the setting is saved automatically by activating the
control function. If you do not touch the Control Dial for 30 seconds, the OSD is automatically exited
saving your current settings.
6.2 Menu Descriptions
The LCD monitor can accept VGA, HDMI, or Display Port video signal inputs and therefore has two
different sets of OSD control functions. Because the digital signaling always achieves optimum
display quality without the need for adjustment, it requires fewer OSD functions than the analog
input mode. The following options are not available in digital input mode: Auto Setup, Display, Clock,
and Phase, denoted by asterisk (*) in the following descriptions. If switched to digital input mode,
you will encounter a “Not Available” message in the OSD menu.
6.3 OSD Structure
Auto Setup*
Exit
Yes
No
Display*
Exit
H. Position
V. Position