TT electronics S-2CONNECT Pro1 User manual

1
1. Switch On 1. Switch On
LED Status Activity
Slow Initialization
Slow Cellular network attach
Fast Cloud data transfer
Solid Installation successful
Slow Network/Hardware failure
Solid Cloud connection failed
2. Check LED2. Check LED
3. Scan QR Code3. Scan QR Code
4. Access Portal 4. Access Portal
5. Mount on Wall5. Mount on Wall
portal.s-2connect.com
configurator.s-2connect.com
The QR code gives the unique ID for the device. The format is 9 digits
Electronics Quick Start Guide

2
Environmental InformationEnvironmental Information
This symbol on the device or packaging means that all
electronic and electric equipment should not be mixed with
general household waste. The disposal of the device after its
lifecycle could harm the environment. Do not dispose of the
device (or batteries) as unsorted municipal waste. This device
should be returned to TT Electronics or to a local recycling
service. Respect the local environmental rules.
Please go to www.s-2connect.com for more information.
SafetySafety
Declaration of ConformityDeclaration of Conformity
Simplified EU Declaration of Conformity
TT Electronics declares that the S-2CONNECT Pro1 follows the essential
requirements of the following EU directives: RED 2014/53/EU, RoHS
2011/65/EC, WEEE 2012/19/EU
Simplified UK Declaration of Conformity
TT Electronics declares that the S-2CONNECT Pro1 follows applicable UK
regulations.
This equipment complies with EU radiation exposure limits set forth for a
piece of uncontrolled equipment. This equipment shall be installed and
operated with a minimum 20cm distance between the device and any
bystander.
•Do not disassemble the device
•Do not expose the device to water
•Do not crush, apply excessive force or dispose in a fire
•Do not mount device in direct sunlight or expose to high temperatures
•Ensure the mounting surface is clean, smooth and stable
•Do not use if the housing is damaged, keep the device powered down
•Store unused devices in a cool dry area
ContactContact
[e-mail]
TT Electronics
Tofts Farm Industrial Estate East
Brenda Rd
Hartlepool
TS25 2BQ
United Kingdom
www.ttelectronics.com
TroubleshootingTroubleshooting
LED Status Cause and Remedy
Slow Poor signal strength. Try different location
Solid IP network problem or server down. Restart