TUMAKOU T-009 User manual

TUMAKOU
T-009 Nano Ionic Facial Steamer
Operation Manual
Thank you for purchasing TUMAKOU product.
❀In order to use this product correctly,please
read this manual before use;
❀In order to read the manual at any time when
you need it,please keep this manual in a safe
places;
❀Please pass this manual to whom will use
this product.
To ensure that the product is used correctly and
safely, please read the instruction manual
carefully before use.
The precautions described in this manual are
intended to ensure the safe and proper use of
the product and to prevent injuries to yourself
and others,or damage to property.
The following symbols classify and explain the
extent of danger or damage that can result from
incorrect use.
This symbol indicates content that
can cause personal injury when
used improperly.
This symbol indicates cases in
which incorrect use of the product
could lead to physical injury or
property damage*.
Ⅰ.Safety Precautions
Danger
Caution
1

*Property damage means any damage related
to houses,household appliances or pets.
The following symbols are used in this manual
to explain procedures, restrictions, handling
precautions , and instructions that should be
followed for safety.
Danger
This symbol
indicates
prohibited actions.
This symbol
indicates
precautionary
measures.
This symbol indicates compulsory actions
and instructions that must be performed.
The following behaviors are prohibited,
otherwise it may cause an accident or
cause personal injury.
▶Insert debris into the nozzle or block the
nozzle.
▶Hold it in your hands.
▶Use it near a bathtub, washbasin, or
other wet objects.
▶For people who are insensitive to heat.
▶Extend, pull, bend forcibly, bind the power
cord or place it under a heavy article or
make it be clamped.
▶Disassembling,remodeling or repairing
the product.
▶Use it near combustible articles (such as
alcohol,diluent, gasoline, nail polish
remover or hair spray).
▶Plug in and pull out the power plug when
the hand is wet.
▶Store within the reach of small children or
near pets.
Anyone with the following conditions
should consult a physician prior to using
this product.
Doing so may cause an accident or
problems to the body or skin.
▶Physical discomfort (pregnancy induced
hypertension syndrome, etc.) during
development, early pregnancy,after birth
or during pregnancy.
▶People with allergies, those with skin
diseases, dermatitis and severe sunburn.
▶People with skin damage, wetness,
swelling, etc.”
▶A person who has just undergone surgery
and is recovering.
Caution
Caution
Refrain from doing any of the following.
Doing so may result in an accident or
injury.
2 3

▶Particularly sensitive skin.
The following behaviors must be followed,
otherwise it may cause personal injury or
property damage.
▶If the power cord is damaged, it must be
eplaced by a professional from the
manufacturer, its service department, or
similar department to avoid a hazard.
▶Because it will spray hot water vapor,
please use the appliance carefully.
▶Unplug the power cord when fling and
cleaning.
▶Please unplug the power plug after use.
▶Please place this appliance on a flat and
hard surface.
▶Do not tilt, shake or move the product
during or within 5 minutes of use,
otherwise hot water may be spilled or
steam may be ejected from the nozzle,
resulting in burns.
▶Before cleaning and maintenance,
remove the power plug and allow the
appliance to cool before proceeding.
▶The appliance should be cleaned after
use to avoid accumulation of grease and
other residues.
▶Please use distilled or purified water.Do
not add any substanc es (such as
essential oils, milk, etc.) in the water.
Unclean water can cause machine
malfunctions.In severe cases, water
vapor may be sprayed to cause burns.
▶If the water tank does not have a water
machine to stop spraying,it is forbidden to
immediately pull out the water tank and
add water to prevent the machine from
spraying hot water and causing burns. It
is necessary to turn off the power of the
machine first,and wait 5 minutes before
re-watering.
▶Water cannot be directly applied to the
machine. Use the matching water tank to
operate.
▶This product may not be used by persons
(including children) who are physically
impaired, have physical or mental
disabilities, or lack relevant experience
and knowledge, unless they are
responsible for their safety or supervision.
▶If your skin or body feel pain or abnormal,
stop using it immediately.
Caution
Even if none of the conditions above apply to
you,please consult with your physician if you
have any concerns about using the product.
4 5

110-120V
【Spray time】
●A box water of cool steamer can spray for
about 60 minutes.
●A box water of hot steamer can be sprayed
for about 25 minutes.
●Excessive use of the hot mist will open the
pores.It is recommended to use no more
than two times a day. After hot steam care,
basic skin care hydration (such as masking)
is required, otherwise it will easily lead to dry
skin.
【1.Power supply】
Plug the power plug into
a household power
socket. (120V - 60Hz)
【Add water】
Pull up the water tank,
unscrew the tank cap, and
pour water into the tank.
Then tighten the tank
cover and load the tank
into the machine.
Ⅳ.Basic usage
Water quality requirements
This product can only be used with distilled or
purified water.
❀When you open the package for the first time,
you may find that the machine has residual
water. This is the water left in the factory's aging
test. It is not a quality problem and can be used
with confidence.
【Place】
Place the machine on a
flat,sturdy table.
Ⅱ.Names of the Parts
Ⅲ.Preparation
Nozzle
Switch
Cistern
Cistern cap
6 7

【2.Power on】
When the switch is pulled up to the“COOL ❉”
position, it works in cool mist.
When the switch is pulled up to the“HOT ☀”
position, it works in hot mist.
【3.Spray】
Cold mist: When the
switch is pulled to the
cool mist state, there will
be spray immediately.
【4.Power off】
When the switch is pulled to the"O"position, it
will shut down.Then pullout the power plug.
Hot mist: When the switch
is pulled to the hot mist state, cool mist will
spray out first,and after about 40 seconds, it
will become hot mist.
❀Tips: When there is no water in the water
tank, it will automatically stop and the
machine will enter the standby state.
1.Pull out the water tank, unscrew the water tank
cover,and wipe the water from the water tank
and the water tank cover.
2.Hold the machine, unplug the
drain plug at the bottom of
the machine,and drain the
water inside the machine.
You can tap the body by hand to
shake the machine during the pouring process,
which helps to pour out the water more
thoroughly.)
3.Wipe the water off the body with a dry cloth or
cotton pad.
4.Replace the cleaned water tank and store the
machine.
When using hot steam, some hot water
droplets may be splashed. Therefore, in order
to use safety,it is necessary to ensure that the
distance from the spray port to the human
body is greater than 20 cm.
Ⅴ.Cleaning
●Every time you use it, be sure to pour the
residual water in the tank and the machine.
Otherwise, it may cause odor after storage
for a long time.
●You need to unplug the power plug in the
power off state and wait for the machine to
cool down for at least 5 minutes before
proceeding.
●Do not use steel wool, abrasive cleaner or
diluent,gasoline, alcohol to wipe, otherwise
it will cause scratch, deformation, rupture
and other faults of components.
Drain plug
Bottom
98

●When storing the product, avoid a hot or humid
location (such as inside a car or bathroom) and
keep it away from direct sunlight.
●When not in use, keep in a safe P Mace to
avoid tripping on it and getting injured.
●Keep out of the reach of small children and
store away from pets.
●Before using the product after a long period of
disuse, check and make sure there are no
problems with the product.
Minimum retention period for service functional
parts
The minimum retention period for service
functional parts for this product is 2 years from
the discontinuation of manufacture.
"Service functional parts" means parts that are
required to maintain the functionality of this
product.
When requesting repairs
Within warranty period.
Free repairs will be provided during the1 year
warranty period according to what is stated on
the warranty certificate. To request are pair,
present the warranty certificate at the local
agent customer service station or importer.
After the l year warranty has ended.
For repairs after the end of the warranty period,
consult the local agent customer service station
or importer. Repairs will be provided for a fee.
Rules for Free Repairs
1.If this product ails within the warranty period
when used correctly in accordance with the
precautions in the instruction manual, repairs
will be provided fee of charge.
(Excluding accessories.)
a) When requesting a free repair, bring the
warranty certificate and the product to the
store of purchase and present them with your
Warranty certificate
Be sure to fill the date of purchase, store name
and other requested information, and keep the
warranty certificate after you have read it.
Warranty period
The warranty period is one year from the date
of purchase.
※If there are any problems during use, please
consult the local agent customer service
station or importer.
Ⅶ.Warranty and After -sales Service
Ⅵ.Storage
Before storing, make sure that the machine
is dry. If there is moisture, place the machine
in a ventilated and dry place before storing it.
10 11

request.
b) If the product is used under the condition that
the precautions of the operating manual are
observed, in case of failure within the warranty
period, the company will provide free repair
(except for accessories).
2. Even within the warranty period, repairs will be
charged a fee in the following cases.
a) Product damage due to incorrect use,
inappropriate repair, disassembly, or
modification.
b) Product damage due to transport or dropping
after purchase.
c) Product damage due to fire, earthquake,
water damage,lightning, other natural
disasters, or pollution.
d) Product damage that occurs when loaded
onto an automobile, ship, or other vehicle.
e) When the warranty certificate is not presented.
f ) If the date of purchase, customer name, or
store name is not written on the warranty
certificate or has been altered.
g) Product damage that occurs when this product
has been used in a manner not specified in
the instruction manual or guidebook.
h) Product damage due to neglect of care after
use.
i ) Product damage that occurs when used other
than for ordinary use (for example,commercial
use)
3. The warranty certificate is only valid in the
country or area of purchase.
4. Keep the warranty certificate as it will not be
reissued.
※Please understand that the personal
information (name address, and telephone
number) that you as the customer enter on the
warranty certificate form may be used for after
service during the warranty period and for
safety inspection services afterwards.
※The warranty certificate promises free repairs
during the period and under the conditions
stated on the warranty certificate. Therefore,
the warranty certificate does not limit the legal
rights of the customer wi reward to the party
issuing the warranty certificate (the party
responsible for the warranty certificate) or
other business.
12 13

If you have any questions, please contact us.
we will solve it for you as soon as possible!
1.If the product has quality problems, please
send email to us ([email protected])
2.If the products have quality problems and
cannot be used normally, we will provide
services according to the principle of one year
free maintenance.
3.We do not accept freight collect, the special
after-sales customer service will communicate
with you to solve the postage.
4.Please be patient and fill out the after-sales
service guarantee card, and send it back with
the goods, so that we can deal with it as soon
as possible, thank you.
Ⅷ.Specification
Name
Model
Voltage
Power
Usage time
Water tank
Size
Weigh
Material
Packing List
lonic Facial Steamer
T-009
110-120V~
300W
200ml
Approx. 128x176x230mm
Approx. 790g
ABS
Cool mist:about 60 minutes
Hot mist:about 20 minutes
1* main unit
1* operation manual
Note: In view of the consistent policy of
continuous improvement of products, the
company reserves the right to change
the product specifications, the actual
goods are subject to shipment.
Company Name:
Shenzhen Shishibang Technology Co., Ltd.
Email:tumak[email protected]
Certificate
Inspection Date:
Inspector:
14 15