Turbo-x DAB200 User manual

1 / 6
INSTALLATION AND OPERATION MANUAL
DAB200
DAB radio
MP3/FM/BT/DAB
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty

2 / 6
1. Read and keep these instructions. SAFTYWARNINGS!
2. Heed all warnings and follow all instructions.
3. Do not use this apparatus near water.
4. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
5. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
6. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
7. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
8. Only use attachments/accessories specified by the manufacturer.
9. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
10. Unplug this apparatus during lightning storms or when unused for long periods of time.
11. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
12. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquid such as vases shall be
placed on the apparatus.
13. Plug this apparatus to the proper wall outlet and make the plug to be disconnected readily operable.
14. Main plug is used as disconnected device and it should remain readily operable during intended use. In order to disconnect the
apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.
15. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
16. An appliance with a protective earth terminal should be connected to a mains outlet with a protective earth connection.
WARNING!
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH
AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
TO PREVENT ELECTRICAL SHOC
K, MATCH WIDE BLADE PLUG TO WIDE SLOT, FULLY INSERT.

3 / 6
DAB + Radio
Features:
✓ 19” rack mount digital tuner or internet radio player
✓ Digital tuner via DAB radio
✓ Hi-fi tuner for receiving digital radio station via FM/DAB/DAB+ radio
✓ Compatible with multiple room sound system: allows playback on several devices in the same
network
✓ Easy to exchange antennas for receiving Wi-Fi, DAB/FM and Bluetooth
✓ Input of 3.5mm line in jack
✓ Output of 3.5mm line out jack, headphone jack, stereo RCA jack,
✓ USB port for playing back external data carriers
✓ Bluetooth for music transmission from a smart phone or tablet
✓ 2 alarm storage spaces with independent alarm modes (radio/alarm tone)
Specifications:
Model
DAB200
Description
DAB Radio
Sources
FM/DAB/DAB+ radio & Bluetooth
Input
3.5mm line input, USB
Frequency Response
20Hz-20kHz
S/N Ratio
60dB
Pitch Adjustment
±24%
Radio Frequency
FM: 87-108MHz
DAB Radio
Dimension
482(W)×287(D)×48(H)mm
Weight
2.5kgs
Front Panel

4 / 6
1. POWER BUTTON - Press to set unit enter into standby mode.
2. REMOTE SENSOR –This senses the infrared control signals sent from the remote control.
3. MODE BUTTON –Press to change mode between playing USB sticker, Auxiliary input, Bluetooth, DAB and FM.
4. MENU BUTTON –Press to enter FM/DAB+ menu mode. If the user does not select any item by pressing ENTER button,
it will return to FM/DAB+ playing after several seconds.
FM menus consist of “Audio setting”, “System”.
“Audio setting”
a. Forced mono: As a stereo signal becomes weaker the audio signal will become poorer. It may be preferable to
force the radio to play the station in mono in order to reduce the level of audio noise.
b. Stereo allowed: “St” indicate in display means that the current stations is played as stereo.
“System”
a. Time setup: There are 4 sub-items in time setup menu,
Set clock: While the digit flashing, use “-”,”+” or TUNING knob to set hour and minute, press ENTER to confirm.
Set date: While the digit flashing, use “-”,”+”or TUNING knob to set date, day and year, press ENTER to confirm.
Auto update: Press ENTER to update the firmware automatically.
Set 12/24 hours: enter to switch between the 12-hour and 24-hour formats.
b. Factory reset: If you select “Yes” item, a full reset will be performed. The station list and presets will be erased.
c. SW version: If you select the item, it shows the software version for several seconds.
DAB+ menus consist of “Station scan”, “System”.
“Station scan”
a. Full scan: It scans all of the frequencies in BAND-III.
b. Manual tune: use “-”,”+” and “ENTER” button to select a frequency.
“System”
a. Time setup: There are 4 sub-items in time setup menu
Set clock: While the digit flashing, use “-”,”+” or TUNING knob to set hour and minute, press ENTER to confirm.
Set date: While the digit flashing, use “-”,”+”or TUNING knob to set date, day and year, press ENTER to confirm.
Auto update: Press ENTER to update the firmware automatically.
Set 12/24 hours: enter to switch between the 12-hour and 24-hour formats.
b. Factory reset: If you select “Yes” item, a full reset will be performed. The station list and presets will be erased.
c. SW version: If you select the item, it shows the software version for several seconds.
5. INFO BUTTON - Switch to show different type of displaying information for the current playing station
FM mode
Radio text: It makes Radio text displayed in LCD
Program type: It makes the program type of the current station displayed in LCD
Signal strength: It makes the signal strength of the current service displayed in LCD
Time and Date: It makes the time and date information displayed in LCD
DAB+ mode
DLS: It makes DLS text displayed in LCD
Program type: It makes the program type of the current station displayed in LCD
Ensemble: It makes the current ensemble name displayed in LCD
Time and Date: It makes the time and date information displayed in LCD
Transfer rate: It makes the bit rate information displayed in LCD
Signal strength: It makes the signal strength of the current service displayed in LCD
6. PRESET BUTTON - During playing DAB or FM, press the PRESET button, then navigate the preset number and hold
and press ENTER knob until the display shows “stored”, if you select stored preset number, new

5 / 6
stations information is overwritten, if you want to play a preset station during playing DAB or FM,
press the PRESET button, then navigate the preset number and press ENTER knob. “P#” indicates
in display means that the preset number saved. During playing USB sticker, press PRESET to
repeat one track or all the tracks of the USB.
7. –BUTTON –During playing DAB or FM, press to seek the downward frequency by 50KHZ frequency step or navigate
previous item in the sub-menu or move to previous station. During playing USB sticker, press and hold
the button to carry out fast backward searching, press once to skip backward. During playing Bluetooth,
press to skip backward.
8. + BUTTON –During playing DAB or FM, press to seek the upward frequency by 50KHZ frequency step or navigate next
item in the sub-menu or move to next station. During playing USB sticker, press and hold the button to
carry out fast forward searching, press once to skip forward. During playing Bluetooth, press to skip
forward.
9. DISPLAY –It display FM/DAB frequency station, menu, time date information and USB music info etc.
10. TUNING/ENTER KNOB –During playing DAB or FM, turn to navigate the previous or next service on the list. Press to
select the displayed service on the list. Hold and press to auto scan FM/DAB+ stations.
During playing USB sticker, turn to go to the previous or next track, press to start and pause
the playback. During playing Bluetooth, short press to pairing the last paired device, hold
and press to disconnect the current device and enter pairing mode.
11. VOLUME KNOB –To adjust the sound level.
12. USB PORT - Support USB Flash Drive up to 32GB, FAT16/32, USB version 1.0, 1.1, 2.0
13. AUX PORT –Connect your music device to this socket with a 3.5mm jack cable.
14. HEADPHONE JACK –Connect stereo Headphone jack (1/4”)
Rear Panel
15. BLUETOOTH ANTENNA –Insert the attached BT Antenna to this port.
16. FM/DAB+ ANTENNA –Insert the attached Radio Antenna to this port.
17. LINE OUT –Output terminal.

6 / 6
18. POWER SWITCH –Use this switch to turn the unit ON/OFF.
19. AC IN –Insert power cord to this port.
SERVICE
Ensure the problem is not related to operator error, or system devices that are external to this unit. Information provided in the
troubleshooting portion of this manual may help with this process. Once it is certain that the problem is related to the product contact
your warranty provider as described in the warranty section of this manual.
WARRANTY
Warranty terms of global 2 years. While the term and warranty may vary by country and may not be the same for all products.
Terms and conditions of warranty for a given product may be determined first by locating the appropriate country which the product
was purchased in, then by locating the product type.
OVLAŠTENI SERVIS ZA REPUBILKU HRVATSKU:
TURBO-X d.o.o., Kolodvorska 147, 10410 Velika Gorica, CROATIA
Tel: [phone] Fax: [phone]
www.turbo-x.hr serv[email protected]
Specifications may change without pre-notice.