Turbo TTF-M3 User manual

TOWER FAN
Model: TTF-M3
Instruction Manual
Please read this instruction Manual carefully before use
使用前請閱讀此說明書

TTF-M3
Before operating the fan, please read the warning and important instructions carefully
☆SAFETY INSTRUCTIONS
1. This appliance is not intended for use by persons ( including children) with reduced physical
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. If the supply cord is damaged , it must be replaced by the manufacturer, itsservice agent or
similarly qualified persons in order to avoid a hazard.
4. Do not plug the power plug into socket outlet unless the fan is completely assembled.
5. Do not play by insert finger or foreign objects through the fan grill into the fan. The fan blade may
cause injury to human and foreign object may damage the fan.
6. Do not use insecticide on the unit ,or resin and paint. They will cause damage to the fan.
7. Do not disassemble the fan body.
8. This fan is recommended for using in domestic area. Do not use it in the bathroom, kitchen,
outdoor or for industrial use.
area.
9. This unit should be placed on smooth floor and the power cord cannot close to heating appliance.
10. Please check and confirm that the supply voltage to the unit is only for 220V, 50Hz.
11. Please don’t use power cord which is too long or damaged. Before use,the power cord cannot be
pushed by force to avoid damage. If the power cord is too long , it increase the chance of fire,
electric shock or unpredictable hazard..
12. If don’t use the unit, please cut off the power source and keep apart from the power supply.
13..Unplug or disconnect the appliance from the power supply before cleaning.
14. Do not immerse the unit in water,oil or acid solution.
15. Do nott use in high humidity and high temperature area.
16 .Do not cover it by window curtain or put obstacles on the unit.
17. Do not use this unit in outdoor.
.
☆HOW TO ASSEMBLE
1. Pass the power cord through the channel of pillar, and firmly clasp the pillar with pillar.

TTF-M3
2. Aim the top of pillar to the setting hole of oscillation base, then fixes the fan body and the pillar
by tightening four M4×8cross-head screws with a screwdriver.
3. Pass the power cord through the central gate of the base, then clamp rear base and front
base together by self cramp post on the base,coordinate the bottom of the pillar to the
position of base and tighten the four M5×28 cross-head screws by hand.
4. Pass the power cord through the cord anchorage position at the bottom of the base , then put
the cord clamp on the power cord at cord anchorage position. Fix the cord clamp onto the
cord anchorage with two M4x15 cross head screws by screw driver.
☆HOW TO USE
1. Turn the unit on at the main supply. Turn the timer setting to “I “
2. Press speed button “I “, “II”or “III”to adjust wind speed , or press “0 “to switch off the unit.
3. Turn the timer dial to set the length of time that you want the fan to operate for. It will turn off at
the selected time. If you do not wish to use the timer, set it to “I”.

TTF-M3
4. Press the oscillation button if you want the tower fan to oscillate . Press is again to switch the
oscillation function off or if you want the tower fan to stay in one position.
5. CAUTION:The fan should not be operated without the base assembled or not in an upright
position.
? CLEANING
Please don’t disassemble the fan body for cleaning.
a. Clean the tower fan grill with dry and soft cloth or vaccum cleaner only.
b. Do not use benzene,thinner or other solvents, they will cause corrosion or discoloration..
c. Always turn off your tower fan and unplug before carrying out any cleaning.
? CIRCUIT DIAGRAM:
Ｃａｐａｃｉｔｅｒ
Ｍｏｔｏｒ
Ｔｅｍｐａｒａｔｕｒｅ Ｆｕｓｅ
Ｂｌａｃｋ
Ｓｐｅｅｄ Ｓｗｉｔｃｈ
Ｂｌｕｅ
Ｗｈｉｔｅ
Ｒｅｄ
Ｙｅｌｌｏｗ
Ｐｉｎｋ
Ｍｏｔｏｒ
ＯＳＣ Ｓｗｉｔｃｈ
Ｔｉｍｅｒ
Ｎ
ＡＣ
Ｌ
２
Ｉ（ＯＮ）
１
Ｏ
６０
８０
１００
４０
２０
１２０
Ｉ（ＯＮ）
Ｏ（ＯＦＦ）
３
Ｏ（ＯＦＦ）

TTF-M3
USED PRODUCT RECYCLE INCENTIVE PROGRAM
For our better environment we at Kingpin Trading Limited encourage our end users to recycle used
Turbo Brand products. For this cause we provide the following trade-in incentive for our end users’
convenience.
1) Mechanics
The end user is encouraged to bring their used Turbo product in its complete form (including
accessories) to our Customer Service Centre (please refer to the warranty card of this instruction
manual for its address) for trading in a brand new Turbo Brand product of any categories on a
one-for-one basis at 20% discount of the selected new product’s normal retail price. The used
product will be collected by professional recycling organizations.
2) Terms & Conditions:
2.1) Normal product warranty is offered to the selected new product. However, selected product is
not returnable.
2.2) The selected new product can be different from the used product in product category and
model regardless of the respective retail price, e.g. a used humidifier can be traded in for a
dehumidifier.
2.3) The used Turbo product must come from Kingpin Trading Limited’s past or current product
lines. Products distributed by other companies will not be accepted.
2.4) For proper handling, used product in dismantled form will not be accepted.
2.5) The trade-in transaction will be completed at our Customer Service Centre. No transportation
service whatsoever will be provided.
2.6) The selected new product will be paid for in cash. Official receipt will be provided.
2.7) The used product will neither be refunded nor exchanged for cash.
2.8) In case the original retail price of the used product is higher than the discounted price of the
selected new product, the difference will not be compensated in cash or other product.
2.9) The trade-in price is not guaranteed to be the most favourable in the market.
2.10) Selected new product is only available while stocks last.
2.11) Kingpin Trading Limited has the final decisions concerning all matters of this program.
2.12) Kingpin Trading Limited reserves the right to terminate this program without further notice at
any time, and to amend the terms and conditions of this program at its discretion at any time.