TURBRO Greenland GLP10AC-HU User manual

Greenland GLP10AC-HU

11
13
14
15
16
16
16
16
17
19
19
19

After reaching the set temperature, the compressor will stop working. Then the fan will work
intermittently to help circulate air. When the temperature rises, the compressor will be back on.

● This appliance contained UV-C Lamp;
● Read the maintenance instructions before opening the appliance;
● For the UV-C lamp part, normally no need clean and maintenance by user;
● If the UV-C lamp have error, please connect the service, maintenance by the professional;
● The appliance must be disconnected from the power supply before replacing the UV-C LAMP;
● Before opening doors and access panels bearing the ULTRAVIOLET RADIATION hazard symbol for the
conducting USER MAINTENANCE, it is recommended to disconnect the power;
● Do not operate UV-C LAMPS outside of the appliance;
● Unintended use of the appliance or damage to the housing may result in the escape of dangerous UV-C
radiation. UV-C radiation may, even in small doses, cause harm to the eyes and skin;
● Appliances that are obviously damaged must not be operated;
● UV-C BARRIERS bearing the ULTRAVIOLET RADIATION hazard symbol should not be removed;

To turn on/off the air conditioner
To select the operation mode.
To increase the setting temperature; to lengthen the time in TIMER setting
To decrease the setting temperature; to reduce the time in TIMER setting
To adjust the air flow direction vertically
To adjust the fan speed
To switch on/off the TURBO mode; to change the temperature scale
To switch on/off the TIMER function
To switch on/off the SLEEP mode
To activate the Child Lock, press and buttons together for more
than 3 seconds.
Not available for this model
Not available for this model
Not available for this model
Not available for this model
Not available for this model
MODE
FAN
TURBO
TIMER
SLEEP
&
I SET
ECO
DISPLAY
HEALTH
FAN SPEED icon
FAN SPEED
AUTO FAN
TIMER
SLEEP MODE
TURBO
CHILD LOCK
Not available for this model
AUTO MODE
COOL MODE
DRY MODE
FAN MODE
HEAT MODE
BATTERY
FLAP SWING
TEMPERATURE/ CLOCK
SYMBOLS MEANING
BUTTONS FUNCTION
SYMBOLS MEANING
(FLASH)
11

13

If you find it hard to insert the hose, please use a hairdryer or some hot water to soften the drain
hose before installation.
14

15

16