TURY FAST MAX IP 5 User manual

2. INSTALLATION
3. PROGRAMMING AND SETTINGS
1.1 Functions
1.1.1 Performance
1.1.2 Eco mode
1.1.3 Original Mode
1.1.4 Reverse auxiliary
1.1.5 Parking
1.1.6 Lock
1.1.7 Auto Lock - Smartphone
1.1.8 Auto Lock - Magic Key
1.1.9 Auto Lock - GPS Tracker - Alarm - Blocker
1.1.10
High idle mode
1.2 Characteristics
1.3 Technical Specifications
1.4 Application
1.5 Package contents
2.1 Necessary tools
2.2 Disconnecting the electronic accelerator
2.3 Electronic accelerator connector locations on the motorcycle
2.4 Electronic Accelerator connector location on can am vehicle
2.5 General installation scheme for four-wheel vehicles subject to moisture ingress
2.6 General installation scheme for motorcycles
2.7 General installation scheme for CAN AM
3.1 Download
3.2 Initial settings
3.3 Smartphone pairing
3.4 Programming the accelerator pedal
3. 5 User control and pairing password
3.6 Setting up the acceleration maps
3.7
Setting the eco mode
3.8 Activating the original acceleration mode
3.9 Reverse assist
3.10 Activating and deactivating the Parking function
3.11 Activating and deactivating the manual lock function
3.12 Auto Lock - Smartphone
3.12.1 Configuration from android 13 to keep the fast max app service active
3.13 Auto Lock - Magic Key (Not included in the product)
3.14 Auto Lock - GPS Tracker - Alarm - Blocker
3. 15 High idle mode
3.16 Automatic closing of the FAST MAX APP
3.17 Language selection
3.18 Hide logotypes
1. PRESENTATION
www.tury.com.br
4.1 Technology
5.1 Troubleshoot
5. VALIDATION
4. SECURITY

2
www.tury.com.br
CONGRATULATIONS YOU HAVE PURCHASED A HIGH QUALITY PRODUCT THAT
WILL NOW ENABLE YOU TO HAVE MAXIMUM ANTITHEFT SECURITY IN YOUR
VEHICLE AND MAKE IMPROVEMENTS BY ADJUSTING IT TO YOUR DRIVING
PREFERENCES. FAST MAX IP REDUCES THE ORIGINAL DELAY IN
ACCELERATION RESPONSE TIME. WITH THIS, YOUR VEHICLE WILL HAVE THE
SAME TECHNOLOGY ALREADY USED IN HIGHEND SPORTS VEHICLES,
WITHOUT CAUSING ANY INCOMPATIBILITY WITH YOUR VEHICLE. CAN BE
OPERATED THROUGH THE FAST MAX APP. YOU CAN ALSO USE THE ECO MODE
WHICH HELPS TO REDUCE FUEL CONSUMPTION.
Read the entire installation manual carefully. Always read the icons below carefully, as they
contain fundamental installation tips.
1. PRESENTATION
We recommend that the installation of TURY products is always carried out by
an experienced, trained and qualified professional who has all the necessary
tools to carry out the procedure.
ATTENTION,
TIPS AND
CAUTIONS
TECHNICAL SUPPORT:
JUST CLICK TO
START THE SERVICE
1.1.1 PERFORMANCE: The FAST MAX IP product offers drivers the possibility of adjusting the
vehicle's acceleration response via the app on their smartphone or tablet. Through the 4 acceleration
maps City, Tour, Sport and Fast, it is possible to adjust the vehicle's ideal acceleration profile according
to your needs and preferences, with 9 levels for adjusting the acceleration gain on each map. This
feature, already present in high-end vehicles, is now available to install in your vehicle. The settings are
flexible and allow users to change between them, including being able to return to the vehicle's original
mode at any time.
1.1.2 ECO MODE: ECO mode has an acceleration map with 9 levels for adjusting the negative
acceleration gain. The higher the ECO mode setting level, the greater the reduction in acceleration
response and the vehicle's fuel consumption, but always with good driving fluency. If there is full
acceleration while using ECO mode, for safety reasons the vehicle will respond with the original
acceleration in this condition. Ideal for taxi drivers, app drivers, fleet drivers and users who want to drive
to save fuel when there is no need for a more dynamic acceleration response.
1.1.3 ORIGINAL MODE: To return to the vehicle's original acceleration mode, simply click on the
OFF switch as shown in the image below. You can activate and deactivate FAST MAX IP and select
the maps and acceleration levels at any time, but avoid adjusting while the pedal is accelerating.
1.1.4 REVERSE AUXILIARY: This optional FAST MAX IP function will inhibit the action of any
acceleration map, maintaining the original acceleration whenever the vehicle's reverse gear is engaged.
After disengaging the reverse gear, the acceleration will remain original for a further 5 seconds,
guaranteeing safety during the vehicle's entire maneuvering time.
This REVERSE AUXILIARY function is optional and is only available if the brown wire is
connected to the vehicle's REVERSE lighting signal.
1.1.5 PARKING: This function allows you to limit the vehicle's acceleration to 50%, 40%, 30%,
20% or 15% of the vehicle's original acceleration. It is ideal for when the vehicle is on loan in valet parking
lots, workshops, driving lessons for beginners and other situations where you want to restrict the
vehicle's acceleration. To activate the function, simply hold down the PARKING switch for 2 seconds
and to deactivate the function, simply click on any other button on the main screen.
1.1 FUNCTIONS
VIDEOS:
PROGRAMAÇÃO,
CONFIGURAÇ ÃO,
INSTALAÇÃO E DICAS
THE AVERAGE
INSTALLATION TIME IS
AROUND 30 MINUTES
INSTALLATION
TIME:

3
www.tury.com.br
1.1.6 LOCK: This function is an anti-theft protection for the vehicle which, once activated,
will block the operation of the electronic throttle. To activate the function, simply hold down the
LOCK button on the app for 2 seconds and then confirm by pressing OK (two-level activation
for security). To remove the pedal lock, simply open the app and connect the smartphone to
the FAST MAX IP, which will return to the last mode selected automatically or click on any
other button on the main screen if it is connected. Suitable for use whenever you park your
vehicle on public roads and never activate this function while the vehicle is in motion.
1.1.7 AUTO LOCK - SMARTPHONE: Function designed to enable automatic locking and unlocking
of the vehicle's accelerator pedal, guaranteeing anti-theft protection. Once the Smartphone AUTO LOCK
function has been activated in the app, every time the vehicle is started FAST MAX IP will activate the
automatic pedal lock and will search for the presence of paired Smartphones. Once it locates the presence of
a registered smartphone, the pedal will be unlocked immediately. If it does not locate the presence of a
smartphone, the vehicle's acceleration will remain fully blocked and LOCK mode will be activated. On the
Android system, automatic unlocking is carried out with the app in the background or closed. On the iOS
system, automatic unlocking is only carried out when the app is open in the background. If the app is selected
in the foreground, the pedal will also unlock automatically. Once the vehicle's ignition has been switched on
and the pedal has been unlocked, it will no longer lock in the ignition cycle, even if the smartphone's battery
runs out. On the Apple line, the iOS operating system usually closes and deactivates the FAST MAX APP
automatically even when it is in the background for battery management reasons, and in these cases you will
need to click to open the application again for the FAST MAX APP and the function to work again.
On some smartphones, when they are switched off, you will need to switch the Bluetooth module off and
on again for the AUTO LOCK footswitch deactivation function to work again. This function is located in
the application under MENU/AUTO LOCK/SMARTPHONE.
1.1.8 AUTO LOCK - MAGIC KEY: The MAGIC KEY Bluetooth control is not included in the
product and, once purchased, registered and activated in the application, is intended to be a presence
key in the vehicle's protection system. You can register up to 4 MAGIC KEY's per FAST MAX IP and it
prevents theft, armed robbery or for fleet management security. It operates in exactly the same way as
the AUTO LOCK function via Smartphone, with the pedal being locked and unlocked after the vehicle
has been started, the only difference being that after the vehicle has been started and the pedal has
been unlocked, if the MAGIC KEY is no longer located by FAST MAX IP, the vehicle will activate the
pedal lock according to the MAGIC KEY lock settings. It is possible to set the mode of the start of the
lock at the moment of activation: IMMEDIATE or PROGRESSIVE, and also the type of lock: TOTAL
(complete pedal lock) or PARTIAL (maintains a minimum acceleration on the pedal).
The time for activating the start of the progressive or immediate lockout can be programmed from 1 to 20 minutes.
After the programmed time has elapsed, the configured locking protocol starts, where the immediate
locking system will lock the pedal immediately and the progressive locking system will start with a 50%
acceleration limitation and every 10 seconds it will reduce by 10% until the progressive locking protocol
ends, which can be TOTAL or PARTIAL depending on the configuration. Detection of the presence of
the Magic Key control by FAST MAX IP is only possible with the FAST MAX APP in the background or
closed (disconnected from the module), with the product paired in the foreground and the Magic Key will
not be blocked.
You can configure and enable the permission to deactivate the AUTO LOCK function via Smartphone by
accessing the FAST MAX APP and using the registered pairing password (we recommend changing the
original pairing password for security reasons - see page 9).
If you choose to buy the Magic Key, read its installation manual for more details. This function is located in the
application under MENU/AUTO LOCK/MAGIC KEY and is part of TURY's international patent application.
1.1.9 AUTO LOCK  GPS TRACKER  ALARM  BLOCKER: This function is designed for
situations in which you want to externally lock the electronic throttle via a GPS Tracker, alarms or vehicle
immobilizer. Once the GPS Tracker's AUTO LOCK function has been activated in the app and the tracker has
locked it, the progressive locking system described above for the Magic Key will be activated immediately.
It is possible to set the mode in which the locking starts at the time of activation: IMMEDIATE or
PROGRESSIVE, and also the type of lock: TOTAL (complete pedal lock) or PARTIAL (maintains
minimum pedal acceleration). Upon activation, the immediate locking system will lock the pedal
immediately and the progressive locking system will start with an acceleration limitation of 50% and
every 10 seconds it will reduce by 10% until after 1 minute the acceleration will be completely blocked.
It is possible to configure and enable permission to deactivate the AUTO LOCK function via Smartphone
by accessing the FAST MAX APP and using the registered pairing password (we recommend changing
the original pairing password for security reasons - see item 3.5). Compatible with any GPS tracker or
alarms on the global market, it accepts various types of activation/deactivation commands (fixed
negative, single or double pulse negative). FAST MAX has a specific type of special pulse for OEM
applications only, in which case the tracker must have this protocol on the lock signal output. TURY, the
manufacturer of FAST MAX, has partnerships with most of the world's major vehicle tracking
companies and supplies this electronic communication protocol only to tracker manufacturers. When
activated, this function is a priority for the user of the vehicle, because in cases of theft or robbery only
the tracker itself can unlock the vehicle, but there is the possibility of configuring in the application that
this unlocking is also possible via smartphones paired to the FAST MAX IP. This function is located in
the application under MENU/AUTO LOCK/GPS TRACKER and is part of TURY's international patent application.
1.1.10 HIGH IDLE MODE : This function has been developed for professional mechanics who want
to keep the vehicle at a high idle mode in order to keep the RPM constant for specific maintenance
services that require this procedure, without the need for someone to hold down the accelerator pedal. To
activate this function in the app, go to MENU/HIGH IDLE MODE, accelerate the pedal until it reaches the
desired RPM, click on the OFF switch and then click on the START switch (two-level activation for safety).
At this point you can remove your foot from the pedal and the acceleration will be maintained at the
programmed point.
There are three ways to deactivate this function: click the ON switch, step on the accelerator pedal or
click on any map or level.

4
www.tury.com.br
Vehicles with electronic throttle with manual or automatic gearbox and any type of fuel.
To check the vehicles (makes, models, versions and years) to which this product applies, go to
www.tury.com.br and search in the product finder.
1.4 APPLICATION
1.3 TECHNICAL SPECIFICATIONS
1.5 PACKAGE CONTENTS
• Electronic module;
• Plug and play main harness;
• Nylon clamp.
• Operating current: 10mA
• Operating current models FAST MAX 5.5 and 5.6: 4,7mA
• Input voltage: 3V3 / 5V
1.2 CHARACTERISTICS
• It can be installed in any vehicle fitted with an electronic throttle, with manual or automatic gearbox
and with any type of fuel. From light vehicles, pick-ups, SUVs, vans, trucks, motorcycles, etc;
• Its installation is carried out using the original connectors located on the vehicle's electronic
throttle, in a super quick and simple way, maintaining all the vehicle's originality and warranty;
• Once the pedal has been installed and programmed, any acceleration the vehicle is subjected to
will result in a gain in response as long as the product is using one of the performance maps and
according to the acceleration level selected.
The product's reverse wire is optional and can be installed in the vehicle to prevent instant
acceleration when engaging the vehicle's reverse gear with any performance map activated;
• FAST MAX IP always stores the last acceleration level configured in each map and every time the
vehicle is started it will load the last operating mode. You won't lose your settings if you change the battery;
• Exclusive FAST MAX APP to control all functions from your smartphone;
• On iOS and some versions of Android, when the Smartphone is turned off and on or
restarted, the FAST MAX APP must be opened again in order for it to work again via the Auto
Lock - Smartphone function.
2. INSTALLATION
2.1 NECESSARY TOOLS
*The above tools and parts are not included with the product.
GLOVES
ANTI-NOISE FOAM SCREWDRIVERINSULATING TAPE
INSULATING TAPE
MULTIMETER
OPTIONAL

5
www.tury.com.br
2.2 DISCONNECTING THE ELECTRONIC ACCELERATOR
If you don't have a multimeter, with the driver's door open, turn off and remove the ignition
key from the contact and wait 10 minutes before carrying out item 2.4.
This time is necessary to wait for the electronic accelerator pedal power supply to finish
timing out. In many vehicles this time is shorter. In vehicles equipped with a presence key, keep
it outside the vehicle and at a distance of 1 meter. In many vehicles, stepping on the brake during
the original timer restarts the power supply.
If the original connector is disconnected while the electronic throttle is
energized, an anomaly light may be activated on the vehicle's dashboard,
in some cases requiring an automotive scanner or disconnecting the
battery to turn this light off. In some cases, it is possible to turn off the
injection light by turning the car off and on again a few times.
1 - Switch off the ignition
2 - Wait 10 minutes until
the pedal's power supply
timer has finished, as
shown in the figure
opposite.
3 - Move the key away from the
vehicle, do not open or close any
doors and do not apply the brake
pedal.
Location of the vehicle's
original connector
Original Harness
( - )
Connect to vehicle negative
USE THE MULTIMETER TO CHECK THE END OF THE
TIMING OF THE ACCELERATOR PEDAL POWER SUPPLY
Accelerator pedal
(The location of the
product connection may
vary depending on
the vehicle used)
*Image merely illustrative.
2.3 ELECTRONIC ACCELERATOR CONNECTOR LOCATIONS ON
THE MOTORCYCLE
*Image merely illustrative.
BELOW THE SPEEDOMETER PANEL
BEHIND THE HEADLIGHT
NEAR THE TANK
There are 3 possibilities for locating the accelerator connector on the motorcycle. (See image below).

6
www.tury.com.br
2.4 ELECTRONIC ACCELERATOR CONNECTOR LOCATION ON
CAN AM VEHICLE
*Image merely illustrative.
BETWEEN THE PANEL AND
THE ACCELERATOR PEDAL
2.5 GENERAL INSTALLATION SCHEME FOR FOURWHEEL
VEHICLES SUBJECT TO MOISTURE INGRESS
1º Make sure that the electronic throttle is de-energized;
2º Disconnect the electronic throttle connector (remember, only do this step after doing item 2.3);
3º Connect the original accelerator connector to the FAST MAX IP connector;
4º Connect the FAST MAX IP connector to the electronic accelerator.
5º Fix the FAST MAX IP central unit with the plastic cable tie in a place where it is completely insulated;
6º After attaching the FAST MAX IP control unit and harness, insulate them with foam tape to prevent noise in the vehicle.
In some vehicles it is necessary to loosen the throttle body frame screws to access the
electrical connection of the original electronic throttle connector.
• Installation of the reversing signal:
By installing the BROWN wire on the positive 12V wire of the original reverse gear backlight signal, the product
will activate the Reverse Gear Assist function, which will set the FAST MAX IP to the original acceleration mode
whenever the vehicle is in reverse gear and will remain in this state for 5 seconds after disengaging reverse gear,
automatically returning to the selected map and helping with maneuvering time. (read item 1.1.4)
• Installation of the tracker's negative locking signal:
By installing the WHITE/BLACK wire (NEGATIVE INPUT - GPS TRACKERS) of the FAST MAX IP, it
will be possible to activate the external throttle lock function controlled by the tracker (read item 1.1.9). For
greater security of the product and consequently of the vehicle, we recommend the optional installation
of the FAST SAFE BOX (not included in the product - sold separately).
LOCK SIGNAL
GPS TRACKER OR ALARM
(OPTIONAL)
BLUETOOTH
ACCELERATOR
ELECTRONIC
VEHICLE
ECU
WHITE/BLACK
NEGATIVE INPUT
EXTERNAL AUTO LOCK
BROWN
REVERSE SIGNAL
REVERSE ASSIST
(OPTIONAL)
MAGIC KEY
(OPTIONAL)
ORIGINAL ECU
CONNECTOR
FAST
CONNECTOR
ORIGINAL
ACCELERATOR
CONNECTOR
FAST
CONNECTOR
FAST MAX IP

7
www.tury.com.br
2.6 GENERAL INSTALLATION SCHEME FOR MOTORCYCLES
1º In the case of Harley Davidson, after switching off the ignition, wait for the 2 flashes of the turn
signals to de-energize the system and make the disconnection.
2º Disconnect the electronic accelerator connector (remember, only carry out this step after carrying out item 2.2);
3º Connect the original accelerator connector to the FAST MAX IP connector;
4º Connect the FAST MAX IP connector to the electronic accelerator;
5º Attach the FAST MAX IP central unit with the plastic cable tie in a place where it is completely insulated;
6º After attaching the FAST MAX IP control unit and harness, insulate them with foam tape to prevent noise in the vehicle.
FAST MAX IP
LOCK SIGNAL
GPS TRACKER OR ALARM
(OPTIONAL)
MAGIC KEY
(OPTIONAL)
BLUETOOTH
BELOW THE SPEEDOMETER PANEL
VEHICLE
ECU
WHITE/BLACK
NEGATIVE INPUT
EXTERNAL AUTO LOCK
ORIGINAL ECU
CONNECTOR
FAST
CONNECTOR
ORIGINAL
ACCELERATOR
CONNECTOR
FAST
CONNECTOR
• Installation of the tracker's negative locking signal:
By installing the WHITE/BLACK wire (NEGATIVE INPUT - GPS TRACKERS) of the FAST MAX IP, it
will be possible to activate the external throttle lock function controlled by the tracker (read item 1.1.9). For
greater security of the product and consequently of the vehicle, we recommend the optional installation
of the FAST SAFE BOX (not included in the product - sold separately).
BEHIND THE HEADLIGHT NEAR THE TANK
When installing this product, pay attention to the model of the throttle connector.
Some motorcycle models have a female connector next to the accelerator and other
models have a male connector next to the accelerator.
If you do not use the correct connectors and modules, the product will not work.

8
www.tury.com.br
3. PROGRAMMING AND SETTINGS
The app for this product is called FAST MAX APP and can be downloaded for free from
the Play Store or the Apple Store. The FAST MAX APP allows you to control all the FAST
functions, available for Android and iOS. To use this app, see the instructions and video
tutorials available on the app.
3.1 DOWNLOAD
Click on the links below or view the QR Code with your
smartphone camera to download the application.
App Store
Available at Available at
REVERSE ASSIST
(OPTIONAL)
2.7 GENERAL INSTALLATION SCHEME FOR CAN AM
1º Make sure that the electronic accelerator is de-energized;
2º Disconnect the electronic accelerator connector (remember, only perform this step after performing the item 2.2);
3º Connect the accelerator's original connector to the FAST MAX IP connector;
4º Connect the FAST MAX IP connector to the electronic accelerator.
5º Attach the FAST MAX IP central unit with the nylon tie in a place where it is completely isolated;
6º After the attaching of the central and the harness of the FAST MAX IP, isolate them with foam tape to avoid noise in the vehicle.
After the attaching of the central and the harness of the FAST MAX IP, isolate them with foam tape to avoid noise in the vehicle.
FAST MAX IP
LOCK SIGNAL
GPS TRACKER OR ALARM
(OPTIONAL)
MAGIC KEY
(OPTIONAL)
BLUETOOTH
VEHICLE
ECU
WHITE/BLACK
NEGATIVE INPUT
EXTERNAL AUTO LOCK
ORIGINAL ECU
CONNECTOR
FAST
CONNECTOR
ORIGINAL
ACCELERATOR
CONNECTOR
FAST
CONNECTOR
BELOW THE PANEL
On CAN AM UTVs and ATVs
the connection is not directly on
the accelerator body (pedal)
but between the panel and the
pedal, as shown in the image above.
• Installation of the reversing signal:
By installing the BROWN wire on the positive 12V wire of the original reverse gear backlight signal, the product
will activate the Reverse Gear Assist function, which will set the FAST MAX IP to the original acceleration mode
whenever the vehicle is in reverse gear and will remain in this state for 5 seconds after disengaging reverse gear,
automatically returning to the selected map and helping with maneuvering time. (read item 1.1.4)
• Installation of the tracker's negative locking signal:
By installing the WHITE/BLACK wire (NEGATIVE INPUT - GPS TRACKERS) of the FAST MAX IP, it
will be possible to activate the external throttle lock function controlled by the tracker (read item 1.1.9).
For greater security of the product and consequently of the vehicle, we recommend the optional
installation of the FAST SAFE BOX (not included in the product - sold separately).
BROWN
REVERSE SIGNAL

3.3 SMARTPHONE PAIRING
Only on the ANDROID system is it necessary to activate and enable the device's
LOCATION system according to the procedures below:
To pair the FAST MAX IP product with your ANDROID or iOS smartphone, you must first
activate the device's BLUETOOTH module as shown below:
iOS Android
Activate Location Activate permissionWhile using the App
9
www.tury.com.br
3.2 INITIAL SETTINGS
Step 1
Choose your language
and click CONTINUE Enter the user name and click CONTINUE
Accept the terms of use
and click CONTINUE
Step 2 Step 3
For better operation and performance of the FAST MAX APP on ANDROID devices,
periodically clean out the temporary files (caches) that accumulate as the APP is used,
simply by going to the device's storage settings.

ASSISTA COMO
PAREAR COM SENHA
ASSISTA COMO
PROGRAMAR
10
www.tury.com.br
We recommend that after the first pairing or afterwards, you change this original
password for security purposes in MENU/SETTINGS/USERS AND PASSWORD to
prevent anyone from pairing without your permission. Only previously paired
smartphones will be able to use the FAST MAX APP and access its functions.
To perform the first pairing, use the original product password "0101". Follow the steps below:
1º Enter the pairing screen and the devices will be found automatically. Enter the correct
pairing password for the desired device;
2º Click on the switch for the device you want to pair.
Note: If you enter the incorrect password or enter it without entering any password, you
will leave the pairing screen and return with the message "INCORRECT PASSWORD".
If this happens, enter the correct password and click on the device switch again.
Click on the
switch on the device
Enter the
password
It is mandatory to program the pedal before using the product in any other
operating mode in order for the product to function correctly.
If you wish to program the pedal after pairing, go to
MENU / PEDAL PROGRAMMING in the FAST MAX APP and follow the
procedures above. The pedal can be programmed with the motor switched off or
on and there will be no motor acceleration during programming.
3.4 PROGRAMMING THE ACCELERATOR PEDAL
After installation and the first pairing with the Smartphone using the password, the
FAST MAX APP will automatically open the screen to program the accelerator pedal.
It is mandatory to program the pedal before using the product in any other operating mode in order
for the product to function correctly. You can access the pedal programming in the FAST MAX APP
under MENU/PEDAL PROGRAMMING. Pedal programming must be carried out only once and can
be done with the engine switched off or on, as there will be no acceleration during the programming
procedure (except for FAST MAX 5.4).
Watch the video to program the accelerator pedal and follow the steps below:
NEVER CHANGE THE MAPS WITH THE ENGINE RUNNING BEFORE PROGRAMMING THE PEDAL.
Step 1 Step 2 Step 3
Programming
completed
Click on YES
Step 1 Step 2
In addition to the video on pairing and programming the pedal, we have other videos on
how to use all the features of the FAST MAX IP via the FAST MAX APP.
Press the accelerator
pedal all the way
down and hold.
Click on START

11
www.tury.com.br
Here's another advantage of your FAST MAX IP product: in addition to total control of paired
users, you can also change the pairing password from the App, remembering that the maximum
limit is 4 users. To edit or delete a user, open the FAST MAX APP and click on
MENU/USERS/PASSWORD. After viewing the registered users, click on the user you want to
edit or delete and confirm as shown below:
3.5 USER CONTROL AND PAIRING PASSWORDS
After confirming the deletion of your user, when you next open the FAST MAX APP you will
need to pair up again.
To change the pairing password, simply click on the current password, type in the new
4-digit password and confirm with the ENTER button as shown below.
Step 1 Step 3Step 2
Step 1 Step 2 Step 3 Step 4
Click on MENU
Click on the password Enter the new
password Click on the
ENTER button Password changed
Click on
USERS/PASSWORD Click on the desired user Select EDIT or DELETE
3.6 SETTING UP THE ACCELERATION MAPS
Once the FAST MAX IP pedal has been installed, paired and programmed, it is ready to use.
It starts in original mode and to select the acceleration map, simply click on the desired button:
CITY, TOUR, SPORT or FAST.
CITY TOUR SPORT FAST

12
www.tury.com.br
After selecting the desired map, adjust the acceleration level from 1 to 9.
There are two ways to adjust the acceleration level:
1° Click directly on the desired level;
2° Click on the last lit level, scroll to the desired level;
3° Release your finger to update the new setting.
Below is an example of how to change from level 9 to level 3 on the FAST map.
Click on the
current level Slide to the desired level
Remove your
finger
Step 1 Step 2 Step 3
Never change the maps or throttle levels while the accelerator pedal is depressed.
pedal depressed so that abrupt acceleration variations do not occur, which could cause
faults in the electronic injection system.
Some vehicles may have restricted use of the maximum levels of the FAST Map. In such
vehicles, use the lower levels in everyday life and the maximum levels only when overtaking.
The higher the ECO mode setting, the greater the reduction in acceleration response
and the vehicle's fuel consumption.
You can select any level of adjustment in each of the 4 acceleration maps and the higher the
level, the greater the gain in acceleration response.
ECO mode has an acceleration map with 9 levels for adjusting the negative acceleration
gain. The higher the ECO mode setting, the greater the reduction in acceleration response and
fuel consumption.
reduction in the vehicle's acceleration response and fuel consumption, but always with good
driving fluency. If there is full acceleration while using ECHO mode, for safety reasons the
vehicle will respond with the original acceleration in this condition. Ideal for taxi drivers, app
drivers, fleet drivers and users who want to drive to save fuel when there is no need for a more
dynamic acceleration response.
Setting the
throttle level 1-9
Buttons for selecting
acceleration maps
Map display
and acceleration level
ECO mode
3.7 SETTING THE ECO MODE

www.tury.com.brwww.tury.com.br
13
When you return to the acceleration maps, the last acceleration level set in each map is
always stored. So the user can easily change the maps already set to use each of them for
different needs, such as overtaking, traffic, highways, gear changes, hills, the city, without the
need to reprogram the acceleration levels.
To return to the vehicle's original acceleration mode, simply click on the OFF switch as
shown in the image below.
You can activate and deactivate FAST MAX IP and select the maps and acceleration levels
at any time, but avoid adjusting while the pedal is accelerating.
3.8 ACTIVATING THE ORIGINAL ACCELERATION MODE
3.9 REVERSE ASSIST
This optional FAST MAX IP function will inhibit the action of any acceleration map, maintaining the
original acceleration whenever the vehicle's reverse gear is engaged. After disengaging the reverse gear,
the acceleration will remain original for a further 5 seconds, guaranteeing safety during the vehicle's entire
maneuvering time.
ORIGINAL Mode
3.10 ACTIVATING AND DEACTIVATING THE PARKING FUNCTION
This function allows you to limit the vehicle's acceleration to 50%, 40%, 30%, 20% or
15% of the vehicle's original acceleration. It's ideal for borrowing the vehicle from valet parking
lots, workshops, driving lessons for beginners and other situations where you want to restrict
the vehicle's acceleration. To activate the function, simply hold down the PARKING button for
2 seconds and to deactivate the function, simply click on any other button on the main screen.
1º Open the FAST MAX APP and on the main screen press the letter P (PARKING) for
2 seconds, the function will be activated immediately.
Step 1
Press for
2 seconds Function activated
This REVERSE AUXILIARY function is optional and is only available if the brown wire is
connected to the vehicle's REVERSE lighting signal.

14
www.tury.com.br
Choose the maximum acceleration level (between 15% and 50%) according to your needs or
parking location, as the acceleration response may vary according to the power of each engine;
1° Click directly on the desired level or click on the last lit level;
2° Slide to the desired level;
3° Release to update the new setting.
Step 2: Step 3:Step 1:
Click on the
current level Slide to the desired level Remove your
finger
You can deactivate the PARKING function manually in two ways:
1- We recommend installing our FAST DISPLAY to deactivate the function
manually using the same password as the pairing.
2- You can also deactivate it using the rescue time function. Turn on the
vehicle's ignition key without starting the engine, do not move theaccelerator
pedal until the pedal until the rescue time programmed in the FAST MAX APP
has elapsed. This time can be set via the FAST MAX APP (see 3.12.1).
To avoid the situation where your cell phone is discharged while the
PARKING function is activated, we suggest keeping a smartphone charger
available in the vehicle.
If the AUTOLOCK SMARTPHONE function is activated, after activating the PARKING
function this function will be deactivated until you exit the PARKING function and the pedal
will not lock automatically after turning on the ignition key while using the PARKING function.
If the AUTOLOCK MAGIC KEY function is activated, after activating the PARKING function
this function will be deactivated until you exit the PARKING function and there will be no
automatic pedal lock after turning on the ignition key while using the PARKING function, but
the valet will only have 10 minutes to park the vehicle. If this time expires while the vehicle is
still moving, the FAST MAX IP will begin to progressively lock until the vehicle's acceleration
is completely removed if the presence of the MAGIC KEY is not detected. If this happens,
only detecting the presence of the Magic Key will unlock the vehicle. It is important to note
that this time will always be renewed (reset) if the vehicle is turned off before the end of the
10-minute grace period.

15
www.tury.com.br
Step 1 Step 2
ASSISTA COMO
PROGRAMAR
To activate the LOCK function manually, follow the procedures below:
1º Open the FAST MAX APP and on the main screen press the (LOCK) key for 2 seconds;
2º Read all the recommendations and warnings, click on "OK" to close and the function will be activated.
3º If the manual LOCK switch is activated, to unlock it simply open the FAST MAX APP and it will
return to the last mode selected automatically or click on any other switch on the main screen.
Press for
2 seconds
on LOCK
Read all the
recommendations Function activated
Step 3
Click on another
switch to
deactivate the function
You can deactivate the PARKING function manually in two ways:
1- We recommend installing our FAST DISPLAY to deactivate the function
manually using the same password as the pairing.
2- You can also deactivate it using the rescue time function. Turn on the
vehicle's ignition key without starting the engine, do not move the accelerator
pedal until the rescue time programmed in the FAST MAX APP has elapsed.
This time can be set via the FAST MAX APP (see 3.12).
To avoid the situation where your cell phone is discharged while the
PARKING function is activated, we suggest keeping a smartphone charger
available in the vehicle.
3.11 ACTIVATING AND DEACTIVATING THE MANUAL LOCK FUNCTION
This function is an anti-theft protection for the vehicle which, once activated, will block the
operation of the electronic throttle. To activate the function, simply hold down the LOCK
switch on the app for 2 seconds and then confirm by pressing OK (two-level activation for
security). To remove the pedal lock, simply open the app and connect the smartphone to the
FAST MAX IP, which will return to the last mode selected automatically or click on any other
button on the main screen if it is connected. Suitable for use whenever you park your vehicle
on public roads and never activate this function while the vehicle is in motion.

16
www.tury.com.br
This function is designed to automatically lock and unlock the vehicle's accelerator pedal,
guaranteeing anti-theft protection. Once the Smartphone AUTO LOCK function has been activated in
the app, every time the vehicle is started FAST MAX IP will activate the automatic pedal lock and will
search for the presence of paired Smartphones. Once it locates the presence of a registered
smartphone, the pedal will be unlocked immediately. If it doesn't locate the presence of a smartphone,
the vehicle's acceleration will remain fully blocked and LOCK mode will be activated. On Android
systems, automatic unlocking is carried out while the app is running in the background or closed. On the
iOS system, automatic unlocking is only carried out when the app is open in the background. If the app
is selected in the foreground, the pedal will also unlock automatically. Once the vehicle's ignition has
been switched on and the pedal has been unlocked, it will no longer lock in the ignition cycle, even if the
smartphone's battery runs out. On the Apple line, the iOS operating system usually closes and
deactivates the FAST MAX APP automatically even when it is in the background for battery
management reasons, and in these cases you will need to click to open the application again for the
FAST MAX APP and the function to work again. On some smartphones, when they are switched off,
you will need to switch the Bluetooth module off and on again for the AUTO LOCK footswitch deactivation
function to work again. This function is located in the application under MENU/AUTO LOCK/
SMARTPHONE and to activate follow the procedures below:
3.12 AUTO LOCK  SMARTPHONE
1º Open the FAST MAX APP and on the main screen press the MENU key at the top left;
2º Choose the AUTO LOCK option;
3º Select the SMARTPHONE option;
4º Click on the DISABLED switch to activate the AUTO LOCK switch and click on the ENABLED switch to deactivate it;
5º Read all the recommendations and warnings, click on the "X" to close and the function will be activated.
Step 1 Step 2 Step 3 Step 5Step 4
Click to
activate the
function
Click on MENU Click on AUTO
LOCK Click on SMARTPHONE
Function
activated
Read all the
recommendations
On the Apple line, the iOS operating system tends to close and deactivate the
FAST MAX APP automatically even when it's in the background for battery
management reasons, and in these cases you'll need to click to open the app again for
the FAST MAX APP and the function to work again.
In certain vehicles, after turning off the ignition key, the vehicle's original system will
maintain the power supply to the pedal for between a few seconds and minutes until
the power supply drops out. If the user returns to the vehicle before the pedal power
is switched off, the AUTO LOCK system will not be able to activate the pedal lock in
this case, the pedal lock is only activated after a new ignition cycle.
The rescue time has been developed to allow you to exit LOCK and PARKING modes without using the
FAST MAX APP in the event that your smartphone is lost or broken.
To activate the rescue function, simply turn on the ignition key and wait for the set time without
touching the accelerator pedal. After the time programmed in the App has elapsed, the product will unlock
the pedal, leaving the LOCK or PARKING mode and returning to the ORIGINAL acceleration mode.

17
www.tury.com.br
Setting the
rescue time
If any acceleration occurs within the rescue time window, this function will be deactivated for that
ignition cycle. If the AUTO LOCK SMARTPHONE or MAGIC KEY functions are activated, the LOCK
mode will only be deactivated for this rescue cycle, and will be activated again if the vehicle is switched
off and on again.
AUTO LOCK if the vehicle is turned off and on again. You can set the time from 1 to 60 minutes
according to the procedure below:
You can deactivate the LOCK and PARKING function manually in two ways:
1- We recommend installing our FAST DISPLAY to deactivate the function
manually using the same password as the pairing.
2- You can also deactivate it using the rescue time function. Turn on the
vehicle's ignition key without starting the engine, do not move the accelerator
pedal until the rescue time programmed in the FAST MAX APP has elapsed.
This time can be set via the FAST MAX APP (see 3.12).
To avoid the situation where your cell phone is discharged while the
PARKING function is activated, we suggest keeping a smartphone charger
available in the vehicle.
Reduce time
Increase time
Step 6
Press the
FAST MAX
icon
Step 7
Click on
APP INFO
Step 8 Step 9 Step 10
Click to
deactivate
the function
Step 9
Click on
BATTERY
Step 10
Select the
UNRESTRICTED
function
Function
selected
and activated
6º Press the FAST MAX icon until the options window appears;
7º In the application options window, click on "APP INFO";
8º Click on the switch "REMOVE PERMISSIONS IF APP IS UNUSED" to deactivate it;
9º After deactivating the function mentioned above, on the same screen now click on "BATTERY";
10º Select the option UNRESTRICTED.
3.12.1 CONFIGURATION FROM ANDROID 13 TO KEEP THE
FAST MAX APP SERVICE ACTIVE
For the FAST MAX APP to maintain constant communication without interrupting data
exchange on ANDROID 13 or higher, press the FAST MAX APP icon and click on "APP
INFORMATION", then deactivate the "REMOVE PERMISSIONS IF APP IS UNUSED" option,
then click on "BATTERY" and select the "UNRESTRICTED" option.

18
www.tury.com.br
3.13 AUTO LOCK  MAGIC KEY (NOT INCLUDED IN THE PRODUCT)
Step 1 Step 2 Step 3
The MAGIC KEY Bluetooth control is not included in the product and, once purchased, registered
and activated in the app, is intended to be a presence key in the vehicle's protection system. You can
register up to 4 MAGIC KEY's per FAST MAX IP and it prevents theft, armed robbery or for fleet
management security. It operates in exactly the same way as the AUTO LOCK function via
Smartphone, with the pedal being locked and unlocked after the vehicle has been started, the only
difference being that after the vehicle has been started and the pedal has been unlocked, if the
MAGIC KEY is no longer located by FAST MAX IP, the vehicle will activate the pedal lock according to
the MAGIC KEY lock settings. It is possible to set the mode of the start of the lock at the moment of
activation: IMMEDIATE or PROGRESSIVE, and also the type of lock: TOTAL (complete pedal lock) or
PARTIAL (maintains a minimum acceleration on the pedal).
The time for activating the start of the progressive or immediate lockout can be programmed from 1 to
20 minutes. After the programmed time has elapsed, the configured lockout protocol starts, where the
immediate lockout system will lock the pedal immediately and the progressive lockout system will start
with a 50% acceleration limitation and every 10 seconds it will reduce by 10% until the progressive
lockout protocol ends, which can be TOTAL or PARTIAL depending on the configuration.
Detection of the presence of the Magic Key control by FAST MAX IP is only possible with the
FAST MAX APP in the background or closed (dis connected from the module), with the product paired
in the foreground and the Magic Key will not be locked out.
You can configure and enable the permission to deactivate the AUTO LOCK function via Smartphone
by accessing the FAST MAX APP and using the registered pairing password (we recommend changing
the original pairing password for security reasons - see page 9).
If you choose to buy the Magic Key, read its installation manual for more details. This function is located
in the application under MENU/AUTO LOCK/MAGIC KEY and is part of TURY's international patent
application. The following is an example of activating the Auto Lock - Magic Key function, registering
the controls and setting the time for activating the progressive lock by distance:
1º Open the FAST MAX APP and on the main screen press the MENU key on the top left-hand side;
2º Choose the AUTO LOCK option;
3º Select the MAGIC KEY option;
4º Click on the DISABLED switch to activate the function;
5º Read all the recommendations and warnings, click on the "X" to close and the function will be activated.
Click on MENU Click on
AUTO LOCK Click on
MAGIC KEY
Step 4 Step 5
Click on DISABLED
to activate the
function
Read all the
recommendations
Detection of the presence of the Magic Key control by FAST MAX IP is only
possible with the FAST MAX APP in the background or closed (disconnected
from the module), with the paired product in the foreground and the Magic Key
will not be identified. Whenever the AUTO LOCK function of the MAGIC KEY is
activated and the FAST MAX APP is placed in the background, the module will
automatically disconnect from the App in order to identify the presence of the
Magic Key control and guarantee the security functions.

19
www.tury.com.br
Step 6 Step 7 Step 8
Step 9
6º Click on the "+" switch to register a new Magic Key control;
7º Enter the 6-digit code located on the back of the controller as shown below (and click OK only on iOS);
8º Click ENTER to confirm the registration;
9º Set the locking mode by distance: PROGRESSIVE locking (starts locking after the time set,
see Step 11) or IMMEDIATE locking (starts locking immediately);
10º Set the type of lockout: TOTAL locking (complete pedal locking) or PARTIAL (maintains
minimum pedal acceleration);
You can set the time to start the locking by PROGRESSIVE or IMMEDIATE, which comes with a
factory default of 2 minutes and can be set from 1 to 20 minutes.
To set the time for activating the time-off lock, simply follow the steps below:
11º Set the time to start the remote lock by clicking UP or DOWN;
Click on the
+ switch
Choose the
locking mode
Enter the 6-digit ID
(Click OK on iOS) Click on the ENTER switch Magic Key cadastrado
Step 10
Choose the type
of the lock
Código ID
MAGIC KEY
parte traseira MAGIC KEY
Set the
locking time
Step 11
Reduce time
Increase time
There are two ways to unlock AUTO LOCK via MAGIC KEY on the Smartphone-FAST MAX APP:
without using the pairing password or using the 4-digit pairing password for added security, which is
activated at the factory.
If this deactivation function with the pairing password is deactivated, when you access the
FAST MAX APP it will automatically unlock the pedal and return you to the last mode used.
If this deactivation function with pairing password is activated, when you access the
FAST MAX APP and if you have not located the MAGIC KEY control for at least 6 seconds, the pairing
password will be requested to unlock the pedal.
To configure and enable the AUTO LOCK deactivation function via the FAST MAX APP with the
pairing password, simply follow the steps below (we recommend changing the original pairing password
for safety - see item 3.5):