TUYA ATLO-KN1W-TUYA User manual

Wi-Fi Smart Door/Window Magnetic Manual
Product Review:
Smart door and window sensor is WIFI sensor, it is contact magnetic sensor, it detects actions of (opening/closing), which make
it ideal for security alarm systems as well as automation in combination with smart WIFI switch.
Specification:
Input oltage: DC3 LR03
Static Current: ≤45uA
Alarm Current: ≤55mA
Low- oltage Notification: ≤2.2
Wi-Fi: 802.11 b/g/n
Magnetic control distance: ≥15mm
Working Temperature: -10℃~+50℃
Working Humidity ≤95%RH

How to use:
1. Download Tuya Smart APP, or scan the QR
code to download
2. Push the mounting bracket upward and
take out the bracket, then insert two batteries
according to the graphics in the battery pin
After batteries are loaded, the indicator lights
are always on and then off.
3. Register the APP with your cellphone number.
Then click “+” on “My Home” or click on the
blank to “Add Device”, select security sensor,
and click door magnetic sensors.
4.With the card pick-up Pin in the accessory package, hold
the rest key for more than 5 seconds, and the indicator
Flashes into the automatic network connection mode, enter
The Wi-Fi password according to the prompt , and click confirm.
.

5. In the automatic Network connection mode, indicator flashes
Flashes quickly,holds the reset key for 5 seconds with the card
Pick-up pin, the indicator flashed slowly, and enters the manual
Network connection model. APP chooses compatible model.
According to the prompt, enter Wi-Fi password and click confirm.
Then switch to the Wi-Fi setting interface, connect smartlife_xxx
Network and return to APP to continue adding devices.
Device.
6. Configuration network successfully, click door magnetic icon to
Enter the interface, open the door magnetic, APP will remind you
The door is open, close the door magnetic, APP will remind you
The door is closed.