TV Logic LVM-074W User manual

Multi Format Broadcast
LCD Monitor
OperationManual_v1.0
LVM-074W

Multi Format LCD Monitor 3
Contents
1. Caution
2. Main Features
3. Controls & Functions
4. Menu Tree & Adjustment
5. Menu Operations
[1] Picture
[2] Color
[3] Marker
[4] GPI/UMD
[5] Waveform
[6] Audio
[7] Display & Set
6. Button Functions
7. Other Functions
3URGXFW6SHFLÀFDWLRQV
9. Optional Accessories
04
06
07
11
12
12
12
13
14
16
18
19
21
23
31
32
FCC(FederalCommunicationsCommission)
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforclassAdigitaldevice,pursuanttopart15
oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterfacewhenthe
equipmentisoperatedinacommercialenvironment.
Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyandifnotinstalledandusedin
accordancewiththeinstructionmanual,maycauseharmfulinterferencetoradiocommunications.Operationof
thisequipmentinaresidentialtocorrecttheinterferenceathisownexpense
CAUTION:Changeormodificationsnotexpresslyapprovedbythemanufacturerresponsibleforcompliance
couldvoidtheuser’sauthoritytooperatetheequipment.
DisposalofOldElectrical&ElectronicEquipment
(ApplicableintheEuropeanUnionandotherEuropeancountrieswithseparatecollectionsystems)
Thissymbolontheproductoronitspackingindicatesthatthisproductshallnotbetreatedashousehold
waste.Insteaditshallbehandedovertotheapplicablecollectionpointfortherecyclingofelectricaland
electronicequipment.Byensuringthisproductisdisposedofcorrectly,youwillhelppreventpotentialnegative
consequencefortheenvironmentandhumanhealth,whichcouldotherwisebecausedbyinappropriatewaste
handlingofthisproduct.Therecyclingofmaterialswillhelptoconservenaturalresources.

















4 Multi Format LCD Monitor
1. Caution
tAlways use set voltage. (DC 12V)
tAll operating instructions must be read and
understood before the product is operated.
These safety and operating instructions must
be kept in safe place for future reference.
tAll warnings on the product and in the
instructions must be observed closely.
tAll operating instructions must be followed.
tDo not use attachments not recommended
by the manufacturer. Use of inadequate
attachments can result in accidents.
tThis product must be operated on a power
source specied on the specication label.
tIf you are not sure of the type of power supply
used in your home, consult your dealer or local
power company. For units designed to operate
on batteries or another power source, refer to
the operating instructions.
tThe power cords must be routed properly
to prevent people from stepping on them or
objects from resting on them. Check the cords
at the plugs and product.
tIn case of using other 12V DC adapters instead
of the standard adapter provided by the
manufacturer, please check the proper load
capacity (or current capacity) and use an
adapter with stable voltage.
tDo not overload DC outlets or extension cords.
Overloading can cause or electric shock.
tNever insert an object into the product through
vents or openings. High voltage in the
product, and inserting an object can cause
electric shock and/or short internal parts. For
the same reason, do not spill water or liquid on
the product.
tDo not attempt to service the product yourself.
Removing covers can expose you to high voltage
and other dangerous conditions. Request a
qualied service person to perform servicing.
t If any of the following conditions occurs, unplug
the power cord from the DC outlet, and request
a qualied service person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid was spilled on the product or
when objects have fallen into the product.
c. When the product has been exposed to rain
or water.
d. When the product does not operate properly
as described in the operating instructions.
Do not touch the controls other than those
described in the operating instructions.
Improper adjustment of controls not described
in the instructions can cause damage,
which often requires extensive adjustment
work by a qualied technician.
e. When the product has been dropped or
damaged.
f. When the product displays an abnormal
condition. Any noticeable abnormality in the
product indicates that the product needs
servicing.
tIn case the product needs replacement parts,
make sure that the service person uses
replacement parts specied by the manufacturer,
or those with the same characteristics and
performance as the original parts. Use of
unauthorized parts can result in re, electric
shock and/or other danger.
tUpon completion of service or repair work,
request the service technician to perform safety
checks to ensure that the product is in proper
operating condition.

Multi Format LCD Monitor 5
1. Caution
tWhen mounting the product on a wall or ceiling,
be sure to install the product according to the
method recommended by the manufacturer.
tUnplug the power cord from the DC outlet
before cleaning the product. Use a damp cloth
to clean the product. Do not use liquid cleaners
or aerosol cleaners.
tUnplug the power cord from the AC outlet if
you do not use the product for considerably
long time.
tDo not use the product near water, such as
bathtub, washbasin, kitchen sink and laundry
tub, swimming pool and in a wet basement.
tKeep the product away from direct rays of the
Sun-light.
tDo not place the product on an unstable cart,
stand, tripod or table. Placing the product on an
unstable base can cause the product to fall,
resulting in serious personal injuries as well as
damage to the product. Use only a cart, stand,
tripod, bracket or table recommended by the
manufacturer or sold with the product. When
mounting the product on a wall, be sure to
follow the manufacturer’s instruction. Use only
the mounting hardware recommended by the
manufacturer.
tWhen relocating the product placed on a cart, it
must be moved with the utmost care.
tSudden stops, excessive force and uneven
oor surface can cause the product to fall from
the cart.
tThe vents and other openings in the
cabinet are designed for ventilation. Do not
cover or block these vents and openings since
insucient ventilation can cause overheating
and/or shorten the life of the product. Do not
place the product on a bed, sofa, rug or other
similar surface, since they can block ventilation
openings. This product is not designed for
built-in installation; do not place the product
in an enclosed place such as a bookcase or rack,
unless proper ventilation is provided or the
manufacturer’s instructions are followed.
tIn case of installation the product on the rack,
the inside of the product would be overheated
due to heat from other devices near by and the
decrease of air circulation, which could damage
to the monitor. To prevent the damage, please
have enough space for the monitors and use
fan to avoid heat and maintain the operating
temperature. (Refer to the specication of the
product).
tThe LCD panel used in this product is made of
glass. Therefore, it can break when the product
is dropped or applied with impact. Be careful
not to be injured by broken glass pieces in case
the LCD panel breaks.
tKeep the product away from heat sources
such as radiators, heaters, stoves and other heat
generating products (including ampliers).

6 Multi Format LCD Monitor
tCompatible with various SDI signals
formats (SD/HD/3G)
- This product is compatible with various SDI
signals - SD/HD/3G(A/B)-SDI 480i, 576i, 1080i,
1080p, 1080psf
tCompatible with various analog signals
- This product is compatible with various
analog signals such as CVBS(Composite),
S-Video and YPbPr(Component).
tHDMI(with HDCP) Signal
- HDMI(w/ HDCP) input is available without any
other accessory.
tHDMI To HDMI Throughout
- This product features an HDMI To HDMI
Throughout.
tHDMI To SDI Conversion Output
- This product features an HDMI To SDI
conversion output.
tTemperature Adaptive Color
- This product provides a self-adjustment
function for white balance(or color temperature)
utilizing internal sensor that measures the
temperature of the LCD panel
tAll-in-one type system
- Slim and all-in-one type monitor that supports
various video formats.
tWide Screen / Wide Viewing Angle
tWaveForm/Vectorscope/Audio Level Meter
Function
- WaveForm & Vectorscope
- 2 X Zoom
- Embedded Audio Level Meter
tAudio Out
- Internal Speaker(actives only with input
signals with Embedded Audio)
- Stereo Audio Out through phone Jack.
tKnob Control
- Easy to adjust user conguration using the
control knob on the front of the monitor.
tBLUE ONLY/MONO/Focus Assist/H/V Delay
Function
tRange Error/Luma(Y’) Zone Check (Color/
Zebra Type) Function
tInternal Pattern Generator (0~100% Gray/
ColorBar+Pluge)
tMarkers & Safety Areas
- Center Marker, Safety Area Marker, Aspect
Marker, Display Size(Scan)
tPixel To Pixel/Zoom mode
- Used to display the original image resolution
without scaling to match a certain resolution
or an aspect ratio.
- Select ‘Pixel to pixel’ to display unscaled
images, and select ‘Zoom’ to enlarge the
original image.
- Zoom Scroll Function (Left/Right,Top/Bottom)
tPower
- Basically, the product is powered by normal
DC source.
- The product can be battery-powered.
*DC 12V (Typical)
tAdditional features
- Camera Mounting Hole x 4, VESA Mounting
Standard, External Tally Function, 400cd/m2
Brightness, 800 : 1 Contrast, OSD user interface
VFM-074W Monitor contains the following features:
2. Main Features

Multi Format LCD Monitor 7
3. Controls & Functions
SDI-B ANALOG ASPECT F1 F2 F3 F4 H/V DLY. MAX BRIGHT MENU/EXIT
SDI-A HDMI SCAN MARKER BLUE/MONO W-FORM/VECTOR
+'0,287 +'0,,1
RS 422
TVL-LVM-074W(A)
LVM-074W : FRONT
LVM-074W : REAR

8 Multi Format LCD Monitor
3. Controls & Functions
FRONT
t[HDMI] Button/Lamp
- Used to select HDMI input.
t[SDI-A] Button/Lamp
- Used to select SDI-A input.
t[SDI-B] Button/Lamp
- Used to select SDI-B input.
t[ANALOG] Button/Lamp
- Used to select desired Analog input.
(CVB1/2/3, S-Video, Component, RGB)
- Press the button to activate the analog input
menu-selection, then use UP and DOWN
button to select desired input.
*See section “Other Functions [1]ANALOG
Button” for more information.
t[F1][F2][F3][F4] Button/Lamp
- Used to activate the function.
*See section “6.Button Functions -> [4]
Function key set button” for more
information.
t[SCAN] Button/Lamp
- Used to change the scan mode.
- Press the button to activate through the scan
modes: [UNDERSCAN] -> [OVERSCAN] ->
[PIXEL TO PIXEL] -> [USER ASPECT] ->
[UNDERSCAN]
#PIXEL TO PIXEL mode is not available in
graphic mode.
#[USER ASPECT]: User can adjust width and
height of the display.
* See section “7. Other Functions -> [1] Pixel to
Pixel and [2] User Aspect” for more
information.
t[MARKER] Button/Lamp
- Used to activate/deactivate the Marker. The
type of marker at work may be selected on
the main menu.
t[ASPECT] Button/Lamp
- Used to change the display variout ratio.
- Activates in order of [16:9]-[4:3]-[2.35:1]-[1.85:1]
- [15:9]-[16:10]-[AUTO]-[16:9].
t[BLUE ONLY]/[MONO] Button/Lamp
- Activates in the order of [OFF]-[Blue Only]-
[Mono]-[OFF].
- Press the button to remove red and green
from the input signal and display the screen
only under a blue signal. Press the button
again to activate mono mode.
- They are not available in RGB, DVI ANALOG,
DVI DIGITAL and HDMI modes.
t[WAVEFORM]/[VECTOR SCOPE] Button/Lamp
- Pressing the button activate features in the
order of: [O]-[Waveform]-[Vector Scope]-
[Waveform Wide]-[Waveform YCbCr]-[Wave &
Vector]- [Vector_YCbCr]-[Full Waveform(Y)]
-[Full Vectorscope]-[OFF].
- [Waveform YCbCr] : Displays each waveform
for elements of the luminance and Cb/Cr of
the input signal.
- [Wave & Vector] : Displays waveform and
vector scope simultaneously.
- [Vector YCbCr] : Displays Vector scope and Y/
Cb/Cr waveform simultaneously.
*See section “7. Other Functions [3]Waveform
function and [4]Line Select” for more
information.
t[H/V DELAY] Button/Lamp
- Used to check horizontal sync and vertical
sync simultaneously by moving the display
to the left, right, up and down.
- In this mode, the brightness of image
automatically increase for easy verication of
synchronized signals.
t[MAX BRIGHT] Button/Lamp
- Used to activate the MAX BRIGHT.
t[MENU/EXIT] Button/Lamp
- Used to activate the OSD menu.
- When the OSD menu is activated, press this
button to exit from the menu.

Multi Format LCD Monitor 9
3. Controls & Functions
FRONT REAR
t[OPERATE] Lamp
- Indicates condition and power status of unit.
- Light turns o when the power is disconnected.
- Standby mode is indicated by a red LED light.
- Normal (active) mode is indicated by a Green
LED light.
- Restores to previous state when monitor
power turns o and comes back on.
t[POWER] Button
- Used to turn power on and o.
tAUDIO OUT (Phone Jack)
- Used for Stereo Audio Output through Phone
Jack. (video signals with embedded audio only)
tPGM (Mini USB)
- This terminal is used to upgrade the rmware
or color calibration made by TVLogic.
t[TALLY] Lamp
- Tally lamp that can be toggled in green or red
using the REMOTE(RJ-45) port.
t[BRIGHT] Knob
- Used to adjust the degree of brightness.
- The value is selectable between -100 ~ 100.
t[CONTRAST] Knob
- Used to adjust the contrast.
- The value is selectable between -100 ~ 100.
t[VOLUME/F5] Knob
- Used to adjust the volume for internal speaker
and external output.
- The value is selectable between 0 ~ 30.
- [F5] : Press F5 Knob for 2 second to set the
function. Available functions are [VOLUME]-
[CHROMA]-[APERTURE]-[PHASE]-[FOCUS
LEVEL].
t[UP/DOWN/ENTER] Knob
- Used to move within the menu when OSD
menu is activated, and is also used to
decrease or increase the value of the selected
feature.
- Press the knob to select the main menu and
sub menus.
tEXT.TALLY IN
- This terminal uesd to External tally input.
t[TALLY] Lamp
- Tally lamp that can be toggled in green or red
using the REMOTE(RJ-45) port.
t[SDI-IN A] (BNC)
- HD/SD SDI signal input terminal for SDI A.
t[SDI-OUT A] (BNC)
- HD/SD-SDI signal output terminal for SDI A
signal.
t[SDI-IN B] (BNC)
- HD/SD SDI signal input terminal for SDI B.
t[CVSBS1/Pr/R/S-C] (BNC)
- Signal input terminal used to feed themonitor
COMPOSITE 3, S-VIDEO C, COMPONENT Pr
and RGB R signals.
t[CVBS2/Y/G/S-Y] (BNC)
- Signal input terminal used to feed the monitor
COMPOSITE 1, S-VIDEO Y, COMPONENT Y and
RGB G signals.
t[CVSBS3/Pb/B] (BNC)
- Signal input terminal used to feed the monitor
COMPOSITE 2, RGB B and COMPONENT Pb
signals.
tAUDIO IN (phone jack)
- Internal speakers stereo audio input terminal.
t[HDMI] IN
- Signal input terminal for HDMI signal.
t[HDMI] OUT
- Signal output terminal for HDMI signal.
tLAN
- Used for easy rmware updates.
t[RS422 IN/OUT] (RJ-45)
- Used to control the monitor with protocol
provided by TVLogic or to support TSL
protocol.

10 Multi Format LCD Monitor
3. Controls & Functions
REAR
t[REMOTE] (RJ-45)
- Provides connection to control equipment for
external monitor control.
- Features can be changed in the REMOTE(1/2)
section of OSD menu.
tBATTERY IN
- Battery Power Input : DC 12V
*Rated Power Input : DC 12V (1.5A)
tDC POWER IN / TALLY (XLR 4P)
- DC power input terminal for DC 12V.
<Warning!!>
When using the product make sure to ground
before connecting the input signal line.
The unit may not operate properly if the input
line is connected before the GND is connected.
Connector Composite Component S-Video
1CVBS1Pr C
2CVBS2Y Y
3 CVBS3 Pb No Con.

Multi Format LCD Monitor 11
ವUser may control various functions using MENU
button on the back and the Knob on the side of
the monitor.
ವOSD(On-Screen Display) Menu helps you use
various functions.
ವThis Picture is the menu structure for
LVM-074W
Press MENU button to activate the OSD menu.
2. Move to a desired menu by scrolling the Knob.
3. Press the Knob to select a menu and move to
select a sub-menu by scrolling the Knob.
4. Press the Knob to select the desired sub
menu. (The selected sub-menu will be
highlighted)
5. Press ENTER button or MENU button to
save the new value after adjusting the value
by scrolling the Knob.
6. Press MENU button to return to previous menu
and if there is no previous menu, the OSD menu
will be removed from the screen.
[1] Menu Tree
[2] Menu Control
[3] Menu Control Sequence
4. Menu Tree & Adjustment

12 Multi Format LCD Monitor
5. Menu Operations
tBrightness
- Used to set the brightness(=oset) level from
-100 to 100.
# Press the Knob to adjust Brightness quickly.
tContrast
- Used to set the contrast(gain) level from -100
to 100.
# Press the Knob to adjust Contrast quickly.
tChroma
- Used to set the saturation level from -50 to 50.
# Press the Knob to adjust Chroma quickly.
tPhase
- Used to set the hue(phase) level from -40 to 40.
(Activates only in analog signal input.)
tAperture
- Used to set the sharpness level from -12 to 12.
# Press the Knob to adjust Aperture quickly.
tNTSC Setup
- Used to set Black Level of NTSC video as 0(zero
setup) or 7.5 IRE.
- Activated when NTSC video signal is input
through Composite 1/2/3 or S-VIDEO terminal.
tKnob Lock
- Locks the Knob control(APERTURE, BRIGHT,
CHROMA, CONTRAST, VOLUME).
tColor Temp.
- Controls color temperature and allows instant
access to preset color temperature settings.
- Available color temperatures are 3200K,
5600K, 6500K, 9300K and User 1/2/3.
- In User 1/2/3 modes, user can dene custom
RGB GAIN and BIAS (=Oset) values.
tGain Red/Green/Blue
- Used to set R/G/B Gain(or Picture, Contrast)
level from -256 to 255.
# Only available in User 1/2/3 mode.
tBias Red/Green/Blue
- Used to set R/G/B Bias(or Oset, mainly aects
on Black level) from -100 to 100.
# Only available in User 1/2/3 mode.
tColor Copy
- Used to copy the R/G/B Gain value of pre-
stored color temperature settings.
- In User mode, nd and select the color
temperature and press Enter button to copy
and apply the Gain value to GAIN RED, GAIN
GREEN, GAIN BLUE.
# Only available in User 1/2/3 mode.
tTemperature Adaptive Color
- [On] : Used to measure and compensate
the color temperature shift caused by panel
temperature variation.
- [O] : Used to apply preset color temperature
setting regardless of the panel temaperature.
[1] Picture [2] Color

Multi Format LCD Monitor 13
5. Menu Operations
[3] Marker
tMarker
- Used to activate the Marker function.
- Available marker types are OFF, 16:9, 4:3, 4:3
ON AIR, 15:9, 14:9, 13:9, 1.85:1, 2.35:1, 1.85:1 &
4:3 and USER.
tCenter Marker
- Displays the Center Marker on the screen.
tSafety Area
- Used to select to display and controls the size
and availability of the Safety Area.
- Available sizes are 80%, 85%, 88%, 90%, 93%,
100%, EBU ACTION 16:9, EBU GRAPHIC 16:9, EBU
ACTION 14:9, EBU GRAPHIC 14:9, EBU ACTION
4:3 and EBU GRAPHIC 4:3.
tFit Marker
- Used to activate or inactivate the Fit Marker
function.
- When the Marker type is selected in the Marker
menu, a border line of the Safety Area will be
displayed inside the Marker.Images below
show the dierence between Fit Marker ON
and OFF.
tMarker Mat
- Used to set the darkeness level outside of the
MARKER area from OFF(transparent) to 7(Black).
- The bigger the value, the darker the color.
tMarker Color
- Used to set the color of the MARKER lines.
- Available colors are white, gray, black, red,
green and blue.
tThickness
- Used to set the thickness of the MARKER lines.
- Thickness level is from 1 to 7 by the pixel unit.
tUSER Marker H1
- Used to set the position of the rst horizontal
marker line.
- Displayed when MARKER menu is set to USER.
tUSER Marker H2
- Used to set the position of the second
horizontal marker line.
- Displayed when MARKER menu is set to USER.
tUSER Marker V1
- Used to set the position of the rst vertical
marker line.
- Displayed when MARKER menu is set to USER.
tUSER Marker V2
- Used to set the position of the second vertical
marker line.
- Displayed when MARKER menu is set to USER.
0$5.(5
6$)(7<$5($
),70$5.(52))
0$5.(5
6$)(7<$5($
),70$5.(521

14 Multi Format LCD Monitor
[4] GPI / UMD
5. Menu Operations
tGPI 1~8
- This item displays input signal’s ID when the
3D input format is DUAL STREAM.
- This item activate/ deactivate the REMOTE
function.
- The user may connect an RJ-45 jack to the
REMOTE terminal on the rear of the unit and
designate a function for each pin.
- The default settings are as follows :
PIN 1 : Analog Channel
PIN 2 : HDMI Channel
PIN 3 : SDI-A Channel
PIN 4 : SDI-B Channel
PIN 5 : TALLY R
PIN 6 : TALLY G
- PIN 7 is POWER ON/OFF use only, PIN 8 is GND.
REM
O
TE(
R
J
-45
)
1:
P
in1
2
:P
i
n2
3:
P
i
n
3
4:
P
in4
5: P
i
n5
6:
P
i
n
6
7:
P
in7
8:
G
ND
1
8
- The selectable values are as follows :
Menu
Classi-
cation
Settable Values
PIN
1~6
NONE, Analog Channel, HDMI
Channel, SDI-A Channel, SDI-B
Channel, TALLY R, TALLY G,
TALLY Y, UNDER SCAN, 1:1 SCAN,
ASPECT, H/V DELAY, BLUE ONLY,
16:9 MARKER, 4:3 MARKER, 4:3
ON AIR MARKER, 15:9 MARKER,
14:9 MARKER, 13:9 MARKER, 1.85:1
MARKER, 2.35:1 MARKER, 1.85:1&4:3
MARKER, CENTER MARKER, SAFETY
AREA 80%, SAFETY AREA 85%,
SAFETY AREA 88%, SAFETY AREA
90%, SAFETY AREA 93%, SAFETY
AREA 100%

Multi Format LCD Monitor 15
[4] GPI / UMD
5. Menu Operations
tMomitor ID
- Sets the ID of each monitor for the TV Logic
control protocol or DYNAMIC UMD using RS-
422/485 communication.
- Available values are between 0, 1, 2 ~ 125.
tUMD Display
- This item sets UMD, ANC and DYNAMIC UMD.
*UMD : Displays user customized characters
on screen.
*ANC: Displays characters embedded in SDI
signal.
*DYNAMIC UMD: Displays incoming character
or tally signal from TSL Protocol.
tUMD Character
- Customizes the characters for Under Monitor
Display.
- Alphabets, numbers and special symbols are
available.
- Maximum of 8 characters are available.
tUMD Position
- Used to set position of UMD.
- Activates in order : [Left Top]-[Mid Top]-[Left
Bottom]-[Mid Bottom]-[Left Bottom]-[Left Top].
tXLR TALLY On/O
- Used to set Tally operation according to
the input level of TALLY IN terminal which is
among the terminals of XLR 4P connector in
the rear.
tXLR TALLY Operating Level
- Used to set the input level of Tally operation.
(Open&Low : less than 0.6V, High : more than
2.5V)
- High: Set the level as “High” to activate the
Tally and set the level as “Low” to inactivate
the Tally.
- Low: Set the level as “Low” to activate the Tally
and set the level as “High” to inactivate the Tally.
tXLR TALLY Color
- Used to set Tally color.
- Available colors are Red and Green.

16 Multi Format LCD Monitor
tSelect Line Position
- Used to select specic Vertical Line for
Waveform/Vectorscope.
- It is available when LINE Waveform is activated.
- To activate this feature, go to [WFM/LevelCHK]-
[Waveform/Vector]-[Select Line Position] and
use the Knob to select a vertical line.
- Control range varies according to the resolution
of the input SDI signal.
*PAL : Min 17, Max 522
*NTSC : Min 23, Max 623
*720p : Min 26, Max 750
*1080i : Min 21, Max 1123
*1080p : Min 42, Max 1121
- Control range for Analog signal varies
according to the output resolution of the
singnal.
*Min 0, Max 600
tLuma(Y’) Zone Check
- Displays the Luma(Y’) level of the input image
in colors.
- May select between [Color Pattern] or [Zebra
Pattern].
- Each pixel’s Y’ analized and changed to a certain
color or zebra pattern according to the Index on
the right side of the screen.
- When a pixel’s Y’ level is under 0%(16), the color /
diagonal line will be colored Green.
- When the pixel’s Y’ level is over 100%(235), the
color / diagonal line will be colored Red.
- When the Y’ level of a pixel is between 0~100%,
the pixel is displayed with Gray, except for
selected Luma Zone.
- In the [Color Pattern] mode, a 5% zone of the
selected Y’ level will be colored Pink(5%) and
±10% will be colored Yellow(-10% from Pink) and
Cyan(+10% from Pink).
- In the [Zebra Pattern] mode, ± 5% of the selected
Y’ Level will be displayed with diagonal lines.
tLuma(Y’) Zone Adjust
- Used to set the Y’ level to be colored Yellow,
Pink and Cyan in [Color Pattern] mode, or to set
Y’ level zone to be displayed with diagonal
lines in [Zebra Pattern] mode simply by
scrolling the Knob.
- Available values are 0 ~ 100%.
*See section “7. Other Functions -> [6] Luma(Y’)
Zone Check” for more information.
[5] Waveform
5. Menu Operations
tWaveform Intensity
- Controls the brightness of the WAVEFORM/
VECTOR display.
- Available values are between 0 ~ 30. The
higher the number the brighter the waveform
will be.
tWaveform Trans
- Controls the transparency level of the
WAVEFORM/VECTOR.
- Available values are OPAQUE and TRANS.
*If the option is set to OPAQUE, the main OSD
will overlap with the waveform/vector.
However, it will automatically display it as
transparent and goes back to opaque if the
main OSD disappears.
tWaveform Size
- Controls the size of WAVEFORM/VECTOR.
- Available modes are NORMAL and LARGE.
tLine Waveform
- This item is utilized to display the entire data
or one line data on the waveform.

Multi Format LCD Monitor 17
tC Min
- Used to set the minimum chroma(C’) level from
0 to 255.
- Pixels with values exceeding the min C’ level
will blink in the screen, and displayed as red on
the Wavefo rm.
tY Picture Blink
- Used to set whether or not to blink pixels with
values exceeding Y MAX and Y MIN.
tC Picture Blink
- Used to set whether or not to blink pixels with
values exceeding C MAX and C MIN.
tRange Error
- Used to set whether or not to activate Y MAX,
Y MIN, C MAX, C MIN, Y PICTURE BLINK and C
PICTURE BLINK functions.
- The values of Y MAX, Y MIN, C MAX, C MIN are
indicated in Waveform/Vectorscope.
- If [Y PICTURE BLINK] or [C PICTURE BLINK] is
enabled, the section of image that exceeds the
selected values of Y MAX, Y MIN, C MAX and C
MIN shall blink.
*See section “Other Function -> [8] Range Error”
for more information.
tY Max
- Used to set the maximum luma(Y’) level from
0 to 255.
- Pixels with values exceeding the max Y’ level
will blink in the screen, and displayed as red on
the Waveform.
tY Min
- Used to set the minimum luma(Y’) level from
0 to 255.
- Pixels with values exceeding the min Y’ level
will blink in the screen, and displayed as red on
the WaveForm.
tC Max
- Used to set the maximum chroma(C’) level
from 0 to 255.
- Pixels with values exceeding the min C’ level
will blink in the screen, and displayed as red on
the Waveform.
[5] Waveform
5. Menu Operations

18 Multi Format LCD Monitor
[6] Audio
5. Menu Operations
tAudio Volume
- Used to control the output volume for the
internal speakers or [AUDIO OUT] on the back
of the monitor.
- Control range is from 0 to 30.
tEm. Audio Left/Right
- Used to set embedded audio channel for
internal speaker or [AUDIO OUT] terminal on
the back of the monitor.
- In SDI mode one of the O or CH1~CH16 can
be selected. In HDMI(HDCP 1.1 Version) mode,
Left and Right are set to CH1 and CH2
respectivley.
- HDMI(HDCP 1.1 Version) Input: Channel 1 is
displayed on the top left and Channel 2 is
displayed on the top right.
tLevel Meter
- Used to set the Level Meter for the embedded
audio.
- Available options are OFF, 16 CH(HOR.) and 16
CH(VER.)
- SDI Input : [O]-[16CH(Hor.)]-[16CH(Ver.)]
- HDMI Input: [O]-[2CH(Hor.)]-[2CH(Ver.)]
*16 CH(HOR.) : Displays 8 channels on top
left and 8 channels on top right of the screen
horizontally.
*16 CH(VER.) : Displays 8 channels on center
left and 8 channels on top right of the screen
vertically.
tLevel Meter Display (SDI Only)
- Used to set the display method for audio level
meter.
- Activates only in SDI mode.
- Available modes are Group and Pair.
tLevel Meter Reference
- Display the default audio level meter value,
Available options are -18dB and -20dB.
- Audio level meter within selected value turns
to green and exceeded audio level is displayed
in yellow.
- Audio level exceeding -4dB is displayed in red.
tLevel Meter Size
- Used to control the size of the audio level
meters.
- Available options are NORMAL and LAGRE.
tLevel Meter Decay Time
- Sets the reduction time for max value
indication of audio signals.
- Control range is from MIN 0 to MAX 100. Bigger
number means a longer display time for max
value.

Multi Format LCD Monitor 19
tSystem Default
- Used to initialize OSD values to factory default.
tBack Light
- Used to indicate the backlight level.
- In case of System Default, the value returns to
factory default(after color calibration).
- Available values are from 0 to 50.
tInternal Pattern
- Generates ColorBar, Pluge and Grayscale
Pattern internally.
- Selectable range for Gray Pattern is from 0% to
100% with 5% increment.
*See section “6. Other Function -> [12] Iternal
Pattern” on page 32 for more information.
tH/V Flip
- Used to the displayed image to be ipped
horizontally or vertically.
- This feature provides exible mounting
options for camera operators.
- In [AUTO] mode, the sensor perceives monitor
moving and the screen ips automatically.
- Activates in order : [H Flip]-[V Flip]-[H/V Flip]-
[Auto].
t3G Format
- Used to select 3G-SDI A/B input format
amongNORMAL MODE(AUTO - A 422 10BIT_
YCbCr 50/60P), A 444 10/12BIT_YCbCr, A 444
10/12BIT_RGB, A 422 12BIT_YCbCr, B 444
10/12BIT_YCbCr, B 444 10/12BIT_RGB, B 422
12BIT_YCbCr, B 422 10BIT_YCbCr 50/60P.
- In NORMAL MODE, automatically detected
when Payload signal is contained.
[7] Display & Set
5. Menu Operations
tFirmware Version
- Displays current rmware version.
tZoom
- Used to magnify the image up to 90% on a
pixel basis and is displayed on full screen.
* (e.g.,10% Zoom : If the input signal’s resolution
is 1920 x 1080, only 90% (1728(H) x 976(V)) of
the image would be shown on full screen
without 10% (192(H) x 108(V)) of the image.)
* See section “7. Other Functions -> [5] Zoom”
for more information.
tZoom H/V Scroll
- Activated when [Zoom] mode is selected.
- Used to move the enlarged image to the left/
right or Up/Down by controlling the Knob.
tDSLR Camera Sel.
- Select the DSLR camera to be used with LVM-
074W. [DSLR SCALE] function. Available
models are [CANON 5D/7D], [SONY A77] and
[NIKON D7000].
*DSLR cameras’ screen size and aspect ratio of
Live / Record / Playback modes vary according
to their manufacturer.
tDSLR SCALE (HDMI Format Only)
- This is a special function for CANON/NIKON/
SONY DSLR cameras.
- Used to scale the image with dierent
resolution as to the operation mode(Live View/
Record/ PlayBack) of the camera to fullll the
screen.
*See section “7. Other Functions [9] DSLR SCALE”
for more information.

20 Multi Format LCD Monitor
[7] Display & Set
5. Menu Operations
tClosed Caption
- This item selects Closed Caption.
- Available modes are OFF, 708, 608(LINE21),
608(ANC).
*608 : CEA-608-B, 708 : CEA-708-C standard
display only.
tTimeCode Enable
- Used to set the time code among OFF, VITC and LTC.
tFocus Assist
- Focus Assist helps the shooters to easily nd
out the exact area in the picture with good
focus, simply by adding colors on the shape
or boundaries of the object in the picture.
- Activates in order of [(Mono) On][(Color] On]
[O]
*(Color) On : Only the boudary of the area
with good focus is displayed with the
designated color.
* (Mono) On : The boundary of the area with
good focus is colored with the designated
color, while the rest of the areas(pixels) have
only Y’(Luma) signals to be black & white
image.
* See section “7. Other Functions [7] Focus
Assist” for more information.
tFocus Assist Color
- Used to select a color for FOCUS ASSIST among
red, green and blue.
tFocus Assist Level
- Used to set the edge dierence value between
the edges in an image.
- Available values are from 0 to 100. Larger value
means more sophisticated detail detection.
- Designated color is displayed when the difference
of the edges exceeds the previously set value.
- This feature is available only when the FOCUS
ASSIST mode is activated.