Tyco Electronics ELO 1520 User manual

Touchcomputer User Guide
1520 15-inch LCD Multifunction Touchcomputer

Elo TouchSystems Touchcomputer
User Guide
15" LCDMultifunctionTouchcomputer
1520
RevisionA
P/NE439739
EloTouchSystems
1-800-ELOTOUCH(1-800-356-8682)
www.elotouch.com

Elo TouchSystems 1520 User Guide 3
Copyright © 2009 Tyco Electronics.All Rights Reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language or computer language, in any form or
by any means, including, but not limited to, electronic, magnetic, optical, chemical,
manual, or otherwise without prior written permission of Elo TouchSystems.
Disclaimer
The information in this document is subject to change without notice. Elo TouchSystems
makes no representations or warranties with respect to the contents hereof, and spe-
cifically disclaims any implied warranties of merchantability or fitness for a particular
purpose. References in this publication to Elo TouchSystems products or services do
not imply that Elo TouchSystems intends to make them available in all countries in
which Elo TouchSystems operates. Elo TouchSystems reserves the right to revise this
publication and to make changes from time to time in the content hereof without obliga-
tion of Elo TouchSystems to notify any person of such revisions or changes.
TrademarkAcknowledgments
IntelliTouch, SecureTouch, AccuTouch, and MonitorMouse are trademarks of Elo
TouchSystems. Other product names mentioned herein may be trademarks or regis-
tered trademarks of their respective companies. Elo TouchSystems claims no interest in
trademarks other than its own.

Elo TouchSystems 1520 User Guide 4
Setup 5
UnpackingYourTouchcomputer 5
ProductOverview 6
FrontView 6
Rear View 6
Side View 7
Base Bottom View 7
DisplayOrientation 8
InitialConnections 9
StandardUnit: 9
AdvancedUnit: 9
InitialPower-On 10
LanguageSelection 10
TestDevices 11
TestingtheTouchscreen 11
Time-zoneselection 11
Operation 13
SidePanel Controls 14
OSDControl 14
OSDMenu 14
HeadphoneJack 16
PowerControl 17
PowerButton 17
UsingtheI/Opanel 18
StandardUnit:Intel®DesktopBoard
D945GCLF2 18
AdvancedUnit: Intel®DesktopBoard
DQ45EK 19
ShortBaseMounting 21
SecuringtheTouchcomputerBase21
MountingToAWall 21
DisplayAngle 22
WallMounted 22
Desktop 22
Maintenance 23
CareandHandling 23
Warning 24
WasteElectricalandElectronic Equip-
ment(WEEE)Directive 24
TechnicalSpecifications 25
TouchcomputerSpecifications 25
Dimensional Diagrams 25
Front 25
VESA 26
Rear 26
BaseMounting 27
GeneralInformation 28
StandardUnit:Intel®DesktopBoard
D945GCLF2 28
AdvancedUnit: Intel®DesktopBoard
DQ45EK 29
Display Specifications 33
PowerSupplySpecifications 33
TouchscreenSpecifications 34
EnvironmentalSpecifications 34
HardDiskRecovery 35
Materialsrequired 35
Generaloverview: 36
Begin: 36
TechnicalSupport 45
TechnicalAssistance 45
UsingtheTouchcomputer 45
UsingtheWeb 45
UsingthePhone 45
RegulatoryInformation 46
Warranty 49
Table of Contents

Elo TouchSystems 1520 User Guide 5
C H A P T E R
1
Setup
This chapter discusses how to set up and test your Touchcomputer and any included
peripheral options.
Unpacking Your Touchcomputer
Check that the following items are present and in good condition:
Touchcomputer Power cable US/Canadian European power cable
OR
Quick Install Guide & CD/DVD PowerAdapter

Elo TouchSystems 1520 User Guide 6
Product Overview
FrontView
RearView

Elo TouchSystems 1520 User Guide 7
SideView
BaseBottomView

Elo TouchSystems 1520 User Guide 8
DisplayOrientation

Elo TouchSystems 1520 User Guide 9
Initial Connections
Prior to turning on yourTouchcomputer you must take the power adapter and appropri-
ate power cable from the accessories box. Plug the small round plug with four pins into
the 12Vdc power input on the Touchcomputer. Plug the power cable into the power
adapter and the other end into a suitable power outlet (mains). Make sure the audio
jumper cable and video jumper cable are in place as shown below.
StandardUnit:
Intel: Integrated Dual-core Intel®Atom™ 1.6 GHz processor & 533 MHz system
bus
AdvancedUnit:
IntelCore2DuoE8400 3.0 GHz, 1,333 MHz FSB, 6 MB L2 Cache

Elo TouchSystems 1520 User Guide 10
InitialPower-On
The initial setup of the operating system takes approximately 5-10 minutes.Additional
time may be needed depending on touchcomputer hardware configuration and con-
nected devices. To setup the Windows Operating System (OS) for the touchcomputer,
turn on the touchcomputer and follow the instructions on the screen.
LanguageSelection
When the following window appears, you have the option of changing the language
used in menus and dialogs.
Click Customize. The Regional and Language window shown below will appear.
Select the Language tab. The window shown below will appear.
Select the desired language in the drop-down list labeled Language used inmenusand
dialogs.

Elo TouchSystems 1520 User Guide 11
Time-zoneselection
When the following window appears, you may change the time-zone, date, and/or time
of the touchcomputer.
After making any changes, click Next to finish. Windows Setup will complete the
initialization of the touchcomputer.
Test Devices
TestingtheTouchscreen
The touchscreen is pre-calibrated for accurate touch response.

Elo TouchSystems 1520 User Guide 12
Calibration*
If for any reason the touchscreen needs to be re-calibrated, go to the control panel and
double-click the EloTouchscreen icon. The window shown below will open.
Click on the Align button. This launches the align/calibration program. A window
similar to the one shown below will open. Follow the instructions to align/calibrate the
touchscreen.
*The alignment/calibration procedure may vary between touch technologies.

Elo TouchSystems 1520 User Guide 13
C H A P T E R
2
Operation
This chapter shows the user how to: control the On-Screen Display (OSD) and Power
buttons, use the I/O panel, securely mount the Touchcomputer and adjust the display
head.
MENU
UP/INCREASE
DOWN/DECREASE
SELECT
POWER

Elo TouchSystems 1520 User Guide 14
Side Panel Controls
All adjustments made to the display via OSD and Power controls are automatically
saved. User settings will remain unchanged after powering off/on or in the case of a
power failure.
OSD Control
OSDMenu
To display the OSD Menu, press the Menu button.
1. Press the UP button or DOWN button to toggle and the SELECT button to
select among the different OSD sub-menus and functions.
2. When the function you want to change is shown, press the SELECT button.
To adjust the value of the function:
1. Pressing the UP button increases the value of the selected OSD control option.
2. Pressing the DOWN button decreases the value of the selected OSD control
option.
Control Function
1 Menu/Exit Opens On Screen Display (OSD) / Exits the OSD menu.
2 Up 1. Enter contrast adjustment.
2. Increase value of the selected item.
3. Move OSD selection clockwise.
3 Down 1. Enter brightness adjustment.
2. Decrease value of the adjustment item.
3. Move OSD selection counter-clockwise.
4 Select 1. Auto-Adjust.
2. Selects the adjustment item from the OSD menu.
5 Power 1. Press to turn on the computer.
2. To turn off the computer use the operating system to
shut down the computer. If unable to use the operating
system for shutdown, press and hold the POWER button
for 4-5 seconds.

Elo TouchSystems 1520 User Guide 15
The OSD provides the following adjustments:
Brightness
Adjusts the background luminance of the LCD panel.
Contrast
Adjusts the contrast or the values of color gain (RED, GREEN or BLUE).
ColorTemperature
• sRGB mode can be selected.
• Sets color temperature values of 5500, 6500, 7500,9300 and user defined.
OSDTime-out
Adjusts the time the OSD remains on the screen after no activity
OSDVertical Position
Adjusts the OSD position up or down.
OSDHorizontalPosition
Adjusts the OSD position left or right.
OSDOrientation
Adjusts the rotational orientation of the OSD.
OSDLanguage
Adjusts the language selection of the OSD among English, French, Italian, Ger-
man, or Spanish.
FactoryReset
Changes all OSD settings to factory default.
ColorReset
Changes all OSD color settings to factory default.
Position Reset
Changes all OSD position settings to factory default.
Sharpness
Adjusts the sharpness of the display.
Volume
Adjusts the audio signal level of the internal speakers, speaker bar and audio.
output
Information
The current OSD version is displayed in the exit tab of the main menu.
The current resolution and refresh rates are displayed at the bottom of every OSD
menu.
Shortcutkeys
There are three shortcut buttons allowing the user to make quick adjustments. These
shortcuts are available only when the OSD menu is NOT displayed.
• To adjust contrast, press the UP button.
• To adjust brightness, press the DOWN button.
• To automatically adjust the display, press the SELECT button.

Elo TouchSystems 1520 User Guide 16
OSDLockout
The On Screen Display (OSD) feature can be locked out (disabled) if desired. To enable
this feature, when the OSD is not present, simultaneously press the UP and Down
buttons until OSD LOCKED appears on the screen (approximately five seconds). To re-
enable the OSD function again, simultaneously press the UP and Down buttons until
OSD UNLOCKED appears on the screen (approximately five seconds).
HeadphoneJack

Elo TouchSystems 1520 User Guide 17
Power Control
PowerButton
The power button function can be set by the operating system under:
Control Panel->Display Properties->Screen Saver->Power->Advanced->Power
Buttons.
To override all Operating System settings and shut down the Touchcomputer, press
and hold the power button for 4-5 seconds.
Note: On select models the delay to override the operating system is extended to
15 seconds.

Elo TouchSystems 1520 User Guide 18
Using the I/O panel
The Touchcomputer provides the following I/O interfaces for connecting a wide vari-
ety of compliant devices.
StandardUnit: Intel® Desktop BoardD945GCLF2
VGA
There is one VGA (HD-15) port (normally connected with supplied jumper cable to
displayVGA input).
USB
There are four USB 2.0 typeAports.
Ethernet
There is one RJ45 Ethernet port providing LAN capabilities.
Serial
There is one RS232 serial port.
MicrophoneInput
There is one 3.5 mm microphone input jack for connecting an external microphone.
AudioOutput
There is one 3.5 mm stereo audio output jack for connecting headphones, normally
connected with the supplied jumper cable to the audio input of the display.
PS/2Keyboard
A PS/2 keyboard is functional when connected directly to the PS/2 keyboard port.
PS/2 Mouse
A PS/2 mouse may be connected to the PS/2 mouse port.

Elo TouchSystems 1520 User Guide 19
AdvancedUnit: Intel® Desktop Board DQ45EK
USBandPowered USB
There are six USB 2.0 typeAports.
eSATA
One external SATA(eSATA) channel is provided.
Ethernet
There is one RJ45 Ethernet port providing LAN capabilities.
Serial
There is one RS232 serial port .
MicrophoneInput
There is one 3.5 mm microphone input jack for connecting an external microphone.
AudioOutput
There is one 3.5 mm stereo audio output jack for connecting headphones, typically
connected with the supplied jumper cable to the audio input of the display.
DVI
There is one DVI-I output which is normally connected with the supplied jumper cable
to the VGAinput of the display. Also provided is one DVI-D output.

Elo TouchSystems 1520 User Guide 20
KensingtonLock
The Kensington lock is a security device that prevents theft. To find out more about
this security device, look for Computer Locks on the Kensington website at: http://
www.kensington.com.