Tyco Electronics Elo TouchSystems 15D1 User manual

2009 Tyco Electronics.
Revision A
P/N E924688
Installing the Fingerprint Reader (FPR)
for the D-Series Touchcomputer
Caution:
Before attaching the fingerprint reader, make sure that the touchcomputer is powered off.
North America
Elo TouchSystem
301 Constitution Drive,
Menlo Park, CA 94025
www.elotouch.com
Europe
Tel [phone]
Fax [phone]
[email protected]
Asia-Pacific
Tel [phone]
Fax [phone]
www.tps.co.jp
Latin America
Tel [phone]
Fax [phone]
www.elotouch.com.ar
Elo Technical Support
:
www.elotouch.com/go/websupport
www.elotouch.com/go/contactsupport
Online self-help
Technical Support contacts in your region:
Turn on the touchcomputer.
11
Replace the front door.
Replace the side door.
10
9
Included Items:
Fingerprint reader module (includes cable with USB Type-A
connector)
Two screws to attach module to chassis
?
?
Note: For the D-Series touchcomputer, the software for the
field-installable peripherals is already pre-installed.

Add two screws to hold
it in place.
Add the fingerprint reader
cover.
Connect the USB cable to
the USB connector.
5
Remove the existing cover
from the front door on the
left side.
8
6
7
1
Insert the fingerprint reader
module into the chassis.
4
Turn off the power to the
touchcomputer.
Remove the front door.
Remove the side door,
as shown.
2
5
3