U.S. Security Solutions QS-X31ZAN User manual

P.1
16CH DVR
Quick Start Guide
1. Packing........................................P.2
2. Hard Disk Installation................P.3
3. DVD-RW Installation...................P.4
4. Front Panel Controls..................P.6
5. Rear Panel Connectors..............P.8
I-Phone & Android (IWatch DVR 2)
Default Username is Admin
Default Admin Lock password is 123456
Note: Please see CD included for complete User
manual quick start guide CMS software and

P.2
1. DVR
2. Quick Start
3. IR Remote Control *Pressed "DVR1" Button before use
4. Battery
5. CD
6. Hard Disk Mount
7. Screws
8. IDE to SATA Power Cord
9. Power Cord
10. SATA Cord
Note: Standard shipping products do not include HDD

P.3
Step 1) Fix the HDD to rack mount with the screws as indicated.
Step 2) Place the HDD on the HDD plate and screw it as indicated.
Step 3) Connect the power and the SATA cables as indicated.
Note: After installation, please initialize Hard Disk before starting to record.

P.4
Standard shipping products do not include HDD and DVD-RW)
Step 1:Remove the front cover from DVR.
Step 2:Put the DVD-RW into the unit as indicated.

P.5
Step 3:Put DVR bottom up, screw to fix the DVD-RW as indicated.
Step 4:Connect the power and the flat cables as indicated.

P.6
11 12 13
Control Keys
Description
1DVD Writer
Optional
DVD-RW backup device.
2USB 2.0 Port
Port for USB external devices (USB flash drive devices use, the mouse
behind the back of the USB ports installed)..
3LED Display
(From left to right)
Power
:Power is on.
HDD
:Hard disk is in use.
LAN
:Connected to the internet (in red): Remote user logged in.
REC
:Recording.
PLAY
:Playing back.
4/
In SETUP mode, press to move cursor down. In PLAYBACK mode, press
to stop playing back.
/SLOW
In SETUP mode, press to move cursor up. In PLAYBACK mode, press to
slow down.
/
In SETUP mode, press to increase value. In PLAYBACK mode press to
play forwards.
/
In SETUP mode, press to reduce value. In PLAYBACK mode, press to
play rewind.
5BACKUP/ESC
In LIVE mode, press to display the BACKUP menu. In SETUP mode,
press to return to previ
ous page.
PIP
In LIVE mode, display with picture in picture format.
7ZOOM
In LIVE or PLAYBACK mode, enlarge the display of a channel.
8FREEZE
In LIVE mode, display can be FREEZE.
9T-SH
D
isplay the search menu.
10
IR Sensor
Input sensor for the remote control
.
11
ENTER /
MODE
In SETUP mode, press to enter values. In PLAYBACK mode, switch
between full, quad, 9
-channel, 16-channel display in order.
12
MENU / II
In LIVE mode, press to displaymenu. In PLAYBACK mode, press to pause
playback.
13 MUTE
Enable / Disable Key Tone
.
STATUS
Show DVR Status.

P.7
REC
Start
or stop recording.
PLAY
Play back in normal speed.

P.8
MAIN monitor
BNC port for the main monitor. You can switch to SPOT
monitor by GUI setting.
VIDEO IN
BNC input ports for cameras
, 16 in total.
AUDIO OUT
RCA
output port for audio signal.
EXTERNAL I/O
EXTERNAL I/O port
.
Fan
DC 12V 40mm X 40mm
fan.
SPOT monitor
BNC port to
display full screen image
of all installed cameras in
sequence. (depends on model)
AUDIO IN
RCA input port for audio signal
.
4 ports available for 4CH/8CH.
16 ports available for 16CH.
VGA1
VGA
port.
USB 2.0 port
USB port.
(Device USB Mouse).
LAN
Network port.
IR JACK
IR extension cable jack
.
HDMI
HDMI port.
ON/OFF
Power Switch.
DC 12V
Socket for a
DC 12V input.
e-SATA
External SATA hard disks port for expanding recording space.
1
2
3
4
5
6
7
9
11
12
8
10
15
14
13